Vulnerabilities > CVE-2017-6463 - Improper Input Validation vulnerability in NTP
Attack vector
NETWORK Attack complexity
LOW Privileges required
LOW Confidentiality impact
NONE Integrity impact
NONE Availability impact
HIGH Summary
NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option.
Vulnerable Configurations
Common Weakness Enumeration (CWE)
Common Attack Pattern Enumeration and Classification (CAPEC)
- Buffer Overflow via Environment Variables This attack pattern involves causing a buffer overflow through manipulation of environment variables. Once the attacker finds that they can modify an environment variable, they may try to overflow associated buffers. This attack leverages implicit trust often placed in environment variables.
- Server Side Include (SSI) Injection An attacker can use Server Side Include (SSI) Injection to send code to a web application that then gets executed by the web server. Doing so enables the attacker to achieve similar results to Cross Site Scripting, viz., arbitrary code execution and information disclosure, albeit on a more limited scale, since the SSI directives are nowhere near as powerful as a full-fledged scripting language. Nonetheless, the attacker can conveniently gain access to sensitive files, such as password files, and execute shell commands.
- Cross Zone Scripting An attacker is able to cause a victim to load content into their web-browser that bypasses security zone controls and gain access to increased privileges to execute scripting code or other web objects such as unsigned ActiveX controls or applets. This is a privilege elevation attack targeted at zone-based web-browser security. In a zone-based model, pages belong to one of a set of zones corresponding to the level of privilege assigned to that page. Pages in an untrusted zone would have a lesser level of access to the system and/or be restricted in the types of executable content it was allowed to invoke. In a cross-zone scripting attack, a page that should be assigned to a less privileged zone is granted the privileges of a more trusted zone. This can be accomplished by exploiting bugs in the browser, exploiting incorrect configuration in the zone controls, through a cross-site scripting attack that causes the attackers' content to be treated as coming from a more trusted page, or by leveraging some piece of system functionality that is accessible from both the trusted and less trusted zone. This attack differs from "Restful Privilege Escalation" in that the latter correlates to the inadequate securing of RESTful access methods (such as HTTP DELETE) on the server, while cross-zone scripting attacks the concept of security zones as implemented by a browser.
- Cross Site Scripting through Log Files An attacker may leverage a system weakness where logs are susceptible to log injection to insert scripts into the system's logs. If these logs are later viewed by an administrator through a thin administrative interface and the log data is not properly HTML encoded before being written to the page, the attackers' scripts stored in the log will be executed in the administrative interface with potentially serious consequences. This attack pattern is really a combination of two other attack patterns: log injection and stored cross site scripting.
- Command Line Execution through SQL Injection An attacker uses standard SQL injection methods to inject data into the command line for execution. This could be done directly through misuse of directives such as MSSQL_xp_cmdshell or indirectly through injection of data into the database that would be interpreted as shell commands. Sometime later, an unscrupulous backend application (or could be part of the functionality of the same application) fetches the injected data stored in the database and uses this data as command line arguments without performing proper validation. The malicious data escapes that data plane by spawning new commands to be executed on the host.
Nessus
NASL family Slackware Local Security Checks NASL id SLACKWARE_SSA_2017-112-02.NASL description New ntp packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1, 14.2, and -current to fix security issues. last seen 2020-06-01 modified 2020-06-02 plugin id 99597 published 2017-04-24 reporter This script is Copyright (C) 2017-2018 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/99597 title Slackware 13.0 / 13.1 / 13.37 / 14.0 / 14.1 / 14.2 / current : ntp (SSA:2017-112-02) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Slackware Security Advisory 2017-112-02. The text # itself is copyright (C) Slackware Linux, Inc. # include("compat.inc"); if (description) { script_id(99597); script_version("$Revision: 3.4 $"); script_cvs_date("$Date: 2018/01/26 17:50:31 $"); script_cve_id("CVE-2016-9042", "CVE-2017-6451", "CVE-2017-6452", "CVE-2017-6455", "CVE-2017-6458", "CVE-2017-6459", "CVE-2017-6460", "CVE-2017-6462", "CVE-2017-6463", "CVE-2017-6464"); script_xref(name:"SSA", value:"2017-112-02"); script_name(english:"Slackware 13.0 / 13.1 / 13.37 / 14.0 / 14.1 / 14.2 / current : ntp (SSA:2017-112-02)"); script_summary(english:"Checks for updated package in /var/log/packages"); script_set_attribute( attribute:"synopsis", value:"The remote Slackware host is missing a security update." ); script_set_attribute( attribute:"description", value: "New ntp packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1, 14.2, and -current to fix security issues." ); # http://www.slackware.com/security/viewer.php?l=slackware-security&y=2017&m=slackware-security.648848 script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?7a77564e" ); script_set_attribute(attribute:"solution", value:"Update the affected ntp package."); script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:P"); script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:slackware:slackware_linux:ntp"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux:13.0"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux:13.1"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux:13.37"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux:14.0"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux:14.1"); script_set_attribute(attribute:"cpe", value:"cpe:/o:slackware:slackware_linux:14.2"); script_set_attribute(attribute:"patch_publication_date", value:"2017/04/22"); script_set_attribute(attribute:"plugin_publication_date", value:"2017/04/24"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2017-2018 Tenable Network Security, Inc."); script_family(english:"Slackware Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/Slackware/release", "Host/Slackware/packages"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("slackware.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); if (!get_kb_item("Host/Slackware/release")) audit(AUDIT_OS_NOT, "Slackware"); if (!get_kb_item("Host/Slackware/packages")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Slackware", cpu); flag = 0; if (slackware_check(osver:"13.0", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i486", pkgnum:"1_slack13.0")) flag++; if (slackware_check(osver:"13.0", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1_slack13.0")) flag++; if (slackware_check(osver:"13.1", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i486", pkgnum:"1_slack13.1")) flag++; if (slackware_check(osver:"13.1", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1_slack13.1")) flag++; if (slackware_check(osver:"13.37", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i486", pkgnum:"1_slack13.37")) flag++; if (slackware_check(osver:"13.37", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1_slack13.37")) flag++; if (slackware_check(osver:"14.0", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i486", pkgnum:"1_slack14.0")) flag++; if (slackware_check(osver:"14.0", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1_slack14.0")) flag++; if (slackware_check(osver:"14.1", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i486", pkgnum:"1_slack14.1")) flag++; if (slackware_check(osver:"14.1", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1_slack14.1")) flag++; if (slackware_check(osver:"14.2", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i586", pkgnum:"1_slack14.2")) flag++; if (slackware_check(osver:"14.2", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1_slack14.2")) flag++; if (slackware_check(osver:"current", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"i586", pkgnum:"1")) flag++; if (slackware_check(osver:"current", arch:"x86_64", pkgname:"ntp", pkgver:"4.2.8p10", pkgarch:"x86_64", pkgnum:"1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:slackware_report_get()); else security_warning(0); exit(0); } else audit(AUDIT_HOST_NOT, "affected");
NASL family Red Hat Local Security Checks NASL id REDHAT-RHSA-2017-3071.NASL description An update for ntp is now available for Red Hat Enterprise Linux 6. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 104170 published 2017-10-26 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/104170 title RHEL 6 : ntp (RHSA-2017:3071) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Red Hat Security Advisory RHSA-2017:3071. The text # itself is copyright (C) Red Hat, Inc. # include("compat.inc"); if (description) { script_id(104170); script_version("3.9"); script_cvs_date("Date: 2019/10/24 15:35:43"); script_cve_id("CVE-2017-6462", "CVE-2017-6463", "CVE-2017-6464"); script_xref(name:"RHSA", value:"2017:3071"); script_name(english:"RHEL 6 : ntp (RHSA-2017:3071)"); script_summary(english:"Checks the rpm output for the updated packages"); script_set_attribute( attribute:"synopsis", value:"The remote Red Hat host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "An update for ntp is now available for Red Hat Enterprise Linux 6. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer's time with another referenced time source. These packages include the ntpd service which continuously adjusts system time and utilities used to query and configure the ntpd service. Security Fix(es) : * Two vulnerabilities were discovered in the NTP server's parsing of configuration directives. A remote, authenticated attacker could cause ntpd to crash by sending a crafted message. (CVE-2017-6463, CVE-2017-6464) * A vulnerability was found in NTP, in the parsing of packets from the /dev/ datum device. A malicious device could send crafted messages, causing ntpd to crash. (CVE-2017-6462) Red Hat would like to thank the NTP project for reporting these issues. Upstream acknowledges Cure53 as the original reporter of these issues." ); script_set_attribute( attribute:"see_also", value:"https://access.redhat.com/errata/RHSA-2017:3071" ); script_set_attribute( attribute:"see_also", value:"https://access.redhat.com/security/cve/cve-2017-6462" ); script_set_attribute( attribute:"see_also", value:"https://access.redhat.com/security/cve/cve-2017-6463" ); script_set_attribute( attribute:"see_also", value:"https://access.redhat.com/security/cve/cve-2017-6464" ); script_set_attribute(attribute:"solution", value:"Update the affected packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"exploit_available", value:"false"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:ntp"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:ntp-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:ntp-doc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:ntp-perl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:ntpdate"); script_set_attribute(attribute:"cpe", value:"cpe:/o:redhat:enterprise_linux:6"); script_set_attribute(attribute:"vuln_publication_date", value:"2017/03/27"); script_set_attribute(attribute:"patch_publication_date", value:"2017/10/26"); script_set_attribute(attribute:"plugin_publication_date", value:"2017/10/26"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Red Hat Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list", "Host/cpu"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("misc_func.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/RedHat/release"); if (isnull(release) || "Red Hat" >!< release) audit(AUDIT_OS_NOT, "Red Hat"); os_ver = pregmatch(pattern: "Red Hat Enterprise Linux.*release ([0-9]+(\.[0-9]+)?)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Red Hat"); os_ver = os_ver[1]; if (! preg(pattern:"^6([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Red Hat 6.x", "Red Hat " + os_ver); if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "s390" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Red Hat", cpu); yum_updateinfo = get_kb_item("Host/RedHat/yum-updateinfo"); if (!empty_or_null(yum_updateinfo)) { rhsa = "RHSA-2017:3071"; yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa); if (!empty_or_null(yum_report)) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : yum_report ); exit(0); } else { audit_message = "affected by Red Hat security advisory " + rhsa; audit(AUDIT_OS_NOT, audit_message); } } else { flag = 0; if (rpm_check(release:"RHEL6", cpu:"i686", reference:"ntp-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"ntp-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"ntp-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"i686", reference:"ntp-debuginfo-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"ntp-debuginfo-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"ntp-debuginfo-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", reference:"ntp-doc-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"i686", reference:"ntp-perl-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"ntp-perl-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"ntp-perl-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"i686", reference:"ntpdate-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"ntpdate-4.2.6p5-12.el6_9.1")) flag++; if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"ntpdate-4.2.6p5-12.el6_9.1")) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : rpm_report_get() + redhat_report_package_caveat() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "ntp / ntp-debuginfo / ntp-doc / ntp-perl / ntpdate"); } }
NASL family OracleVM Local Security Checks NASL id ORACLEVM_OVMSA-2017-0165.NASL description The remote OracleVM system is missing necessary patches to address critical security updates : - add disable monitor to default ntp.conf [CVE-2013-5211] - fix buffer overflow in datum refclock driver (CVE-2017-6462) - fix crash with invalid unpeer command (CVE-2017-6463) - fix potential crash with invalid server command (CVE-2017-6464) - don last seen 2020-06-01 modified 2020-06-02 plugin id 104204 published 2017-10-27 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/104204 title OracleVM 3.3 / 3.4 : ntp (OVMSA-2017-0165) code # # (C) Tenable Network Security, Inc. # # The package checks in this plugin were extracted from OracleVM # Security Advisory OVMSA-2017-0165. # include("compat.inc"); if (description) { script_id(104204); script_version("3.4"); script_cvs_date("Date: 2019/09/27 13:00:35"); script_cve_id("CVE-2013-5211", "CVE-2015-7979", "CVE-2016-1547", "CVE-2016-1548", "CVE-2016-1550", "CVE-2016-2518", "CVE-2016-7426", "CVE-2016-7429", "CVE-2016-7433", "CVE-2016-9310", "CVE-2016-9311", "CVE-2017-6462", "CVE-2017-6463", "CVE-2017-6464"); script_bugtraq_id(64692); script_name(english:"OracleVM 3.3 / 3.4 : ntp (OVMSA-2017-0165)"); script_summary(english:"Checks the RPM output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote OracleVM host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "The remote OracleVM system is missing necessary patches to address critical security updates : - add disable monitor to default ntp.conf [CVE-2013-5211] - fix buffer overflow in datum refclock driver (CVE-2017-6462) - fix crash with invalid unpeer command (CVE-2017-6463) - fix potential crash with invalid server command (CVE-2017-6464) - don't limit rate of packets from sources (CVE-2016-7426) - don't change interface from received packets (CVE-2016-7429) - fix calculation of root distance again (CVE-2016-7433) - require authentication for trap commands (CVE-2016-9310) - fix crash when reporting peer event to trappers (CVE-2016-9311) - don't allow spoofed packets to demobilize associations (CVE-2015-7979, CVE-2016-1547) - don't allow spoofed packet to enable symmetric interleaved mode (CVE-2016-1548) - check mode of new source in config command (CVE-2016-2518) - make MAC check resilient against timing attack (CVE-2016-1550)" ); # https://oss.oracle.com/pipermail/oraclevm-errata/2017-October/000795.html script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?7c1983e3" ); # https://oss.oracle.com/pipermail/oraclevm-errata/2017-October/000796.html script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?9454d3fb" ); script_set_attribute( attribute:"solution", value:"Update the affected ntp / ntpdate packages." ); script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:N/A:C"); script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available"); script_set_attribute(attribute:"exploit_available", value:"true"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:ntp"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:ntpdate"); script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:vm_server:3.3"); script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:vm_server:3.4"); script_set_attribute(attribute:"vuln_publication_date", value:"2014/01/02"); script_set_attribute(attribute:"patch_publication_date", value:"2017/10/26"); script_set_attribute(attribute:"plugin_publication_date", value:"2017/10/27"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"OracleVM Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/OracleVM/release", "Host/OracleVM/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/OracleVM/release"); if (isnull(release) || "OVS" >!< release) audit(AUDIT_OS_NOT, "OracleVM"); if (! preg(pattern:"^OVS" + "(3\.3|3\.4)" + "(\.[0-9]|$)", string:release)) audit(AUDIT_OS_NOT, "OracleVM 3.3 / 3.4", "OracleVM " + release); if (!get_kb_item("Host/OracleVM/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "OracleVM", cpu); if ("x86_64" >!< cpu) audit(AUDIT_ARCH_NOT, "x86_64", cpu); flag = 0; if (rpm_check(release:"OVS3.3", reference:"ntp-4.2.6p5-12.0.1.el6_9.1")) flag++; if (rpm_check(release:"OVS3.3", reference:"ntpdate-4.2.6p5-12.0.1.el6_9.1")) flag++; if (rpm_check(release:"OVS3.4", reference:"ntp-4.2.6p5-12.0.1.el6_9.1")) flag++; if (rpm_check(release:"OVS3.4", reference:"ntpdate-4.2.6p5-12.0.1.el6_9.1")) flag++; if (flag) { if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get()); else security_hole(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "ntp / ntpdate"); }
NASL family Amazon Linux Local Security Checks NASL id AL2_ALAS-2018-1009.NASL description Ephemeral association time spoofing additional protection ntpd in ntp 4.2.x before 4.2.8p7 and 4.3.x before 4.3.92 allows authenticated users that know the private symmetric key to create arbitrarily-many ephemeral associations in order to win the clock selection of ntpd and modify a victim last seen 2020-06-01 modified 2020-06-02 plugin id 109688 published 2018-05-11 reporter This script is Copyright (C) 2018 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/109688 title Amazon Linux 2 : ntp (ALAS-2018-1009) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Amazon Linux 2 Security Advisory ALAS-2018-1009. # include("compat.inc"); if (description) { script_id(109688); script_version("1.1"); script_cvs_date("Date: 2018/05/11 12:23:24"); script_cve_id("CVE-2016-7426", "CVE-2016-7429", "CVE-2016-7433", "CVE-2016-9310", "CVE-2016-9311", "CVE-2017-6462", "CVE-2017-6463", "CVE-2017-6464"); script_xref(name:"ALAS", value:"2018-1009"); script_name(english:"Amazon Linux 2 : ntp (ALAS-2018-1009)"); script_summary(english:"Checks rpm output for the updated packages"); script_set_attribute( attribute:"synopsis", value:"The remote Amazon Linux 2 host is missing a security update." ); script_set_attribute( attribute:"description", value: "Ephemeral association time spoofing additional protection ntpd in ntp 4.2.x before 4.2.8p7 and 4.3.x before 4.3.92 allows authenticated users that know the private symmetric key to create arbitrarily-many ephemeral associations in order to win the clock selection of ntpd and modify a victim's clock via a Sybil attack. This issue exists because of an incomplete fix for CVE-2016-1549 .(CVE-2018-7170) Interleaved symmetric mode cannot recover from bad state ntpd in ntp 4.2.8p4 before 4.2.8p11 drops bad packets before updating the 'received' timestamp, which allows remote attackers to cause a denial of service (disruption) by sending a packet with a zero-origin timestamp causing the association to reset and setting the contents of the packet as the most recent timestamp. This issue is a result of an incomplete fix for CVE-2015-7704 .(CVE-2018-7184) Ephemeral association time spoofing A malicious authenticated peer can create arbitrarily-many ephemeral associations in order to win the clock selection algorithm in ntpd in NTP 4.2.8p4 and earlier and NTPsec 3e160db8dc248a0bcb053b56a80167dc742d2b74 and a5fb34b9cc89b92a8fef2f459004865c93bb7f92 and modify a victim's clock.(CVE-2016-1549) Buffer read overrun leads information leak in ctl_getitem() The ctl_getitem method in ntpd in ntp-4.2.8p6 before 4.2.8p11 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted mode 6 packet with a ntpd instance from 4.2.8p6 through 4.2.8p10. (CVE-2018-7182) Unauthenticated packet can reset authenticated interleaved association The protocol engine in ntp 4.2.6 before 4.2.8p11 allows a remote attackers to cause a denial of service (disruption) by continually sending a packet with a zero-origin timestamp and source IP address of the 'other side' of an interleaved association causing the victim ntpd to reset its association.(CVE-2018-7185) decodearr() can write beyond its buffer limit Buffer overflow in the decodearr function in ntpq in ntp 4.2.8p6 through 4.2.8p10 allows remote attackers to execute arbitrary code by leveraging an ntpq query and sending a response with a crafted array.(CVE-2018-7183)" ); script_set_attribute( attribute:"see_also", value:"https://alas.aws.amazon.com/AL2/ALAS-2018-1009.html" ); script_set_attribute( attribute:"solution", value:"Run 'yum update ntp' to update your system." ); script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:N/A:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:amazon:linux:ntp"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:amazon:linux:ntp-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:amazon:linux:ntp-doc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:amazon:linux:ntp-perl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:amazon:linux:ntpdate"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:amazon:linux:sntp"); script_set_attribute(attribute:"cpe", value:"cpe:/o:amazon:linux:2"); script_set_attribute(attribute:"patch_publication_date", value:"2018/05/10"); script_set_attribute(attribute:"plugin_publication_date", value:"2018/05/11"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2018 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Amazon Linux Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/AmazonLinux/release", "Host/AmazonLinux/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/AmazonLinux/release"); if (isnull(release) || !strlen(release)) audit(AUDIT_OS_NOT, "Amazon Linux"); os_ver = pregmatch(pattern: "^AL(A|\d)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Amazon Linux"); os_ver = os_ver[1]; if (os_ver != "2") { if (os_ver == 'A') os_ver = 'AMI'; audit(AUDIT_OS_NOT, "Amazon Linux 2", "Amazon Linux " + os_ver); } if (!get_kb_item("Host/AmazonLinux/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); flag = 0; if (rpm_check(release:"AL2", cpu:"x86_64", reference:"ntp-4.2.6p5-28.amzn2.2.1")) flag++; if (rpm_check(release:"AL2", cpu:"x86_64", reference:"ntp-debuginfo-4.2.6p5-28.amzn2.2.1")) flag++; if (rpm_check(release:"AL2", reference:"ntp-doc-4.2.6p5-28.amzn2.2.1")) flag++; if (rpm_check(release:"AL2", reference:"ntp-perl-4.2.6p5-28.amzn2.2.1")) flag++; if (rpm_check(release:"AL2", cpu:"x86_64", reference:"ntpdate-4.2.6p5-28.amzn2.2.1")) flag++; if (rpm_check(release:"AL2", cpu:"x86_64", reference:"sntp-4.2.6p5-28.amzn2.2.1")) flag++; if (flag) { if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get()); else security_hole(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "ntp / ntp-debuginfo / ntp-doc / ntp-perl / ntpdate / sntp"); }
NASL family SuSE Local Security Checks NASL id SUSE_SU-2017-1052-1.NASL description This ntp update to version 4.2.8p10 fixes the following issues: Security issues fixed (bsc#1030050) : - CVE-2017-6464: Denial of Service via Malformed Config - CVE-2017-6462: Buffer Overflow in DPTS Clock - CVE-2017-6463: Authenticated DoS via Malicious Config Option - CVE-2017-6458: Potential Overflows in ctl_put() functions - CVE-2017-6451: Improper use of snprintf() in mx4200_send() - CVE-2017-6460: Buffer Overflow in ntpq when fetching reslist - CVE-2016-9042: 0rigin (zero origin) DoS. - ntpq_stripquotes() returns incorrect Value - ereallocarray()/eallocarray() underused - Copious amounts of Unused Code - Off-by-one in Oncore GPS Receiver - Makefile does not enforce Security Flags Bugfixes : - Remove spurious log messages (bsc#1014172). - Fixing ppc and ppc64 linker issue (bsc#1031085). - clang scan-build findings - Support for openssl-1.1.0 without compatibility modes - Bugfix 3072 breaks multicastclient - forking async worker: interrupted pipe I/O - (...) time_pps_create: Exec format error - Incorrect Logic for Peer Event Limiting - Change the process name of forked DNS worker - Trap Configuration Fail - Nothing happens if minsane - allow -4/-6 on restrict line with mask - out-of-bound pointers in ctl_putsys and decode_bitflags - Move ntp-kod to /var/lib/ntp, because /var/db is not a standard directory and causes problems for transactional updates. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 99469 published 2017-04-19 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/99469 title SUSE SLES11 Security Update : ntp (SUSE-SU-2017:1052-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from SUSE update advisory SUSE-SU-2017:1052-1. # The text itself is copyright (C) SUSE. # include("compat.inc"); if (description) { script_id(99469); script_version("3.12"); script_cvs_date("Date: 2019/09/11 11:22:15"); script_cve_id("CVE-2016-9042", "CVE-2017-6451", "CVE-2017-6458", "CVE-2017-6460", "CVE-2017-6462", "CVE-2017-6463", "CVE-2017-6464"); script_name(english:"SUSE SLES11 Security Update : ntp (SUSE-SU-2017:1052-1)"); script_summary(english:"Checks rpm output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote SUSE host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "This ntp update to version 4.2.8p10 fixes the following issues: Security issues fixed (bsc#1030050) : - CVE-2017-6464: Denial of Service via Malformed Config - CVE-2017-6462: Buffer Overflow in DPTS Clock - CVE-2017-6463: Authenticated DoS via Malicious Config Option - CVE-2017-6458: Potential Overflows in ctl_put() functions - CVE-2017-6451: Improper use of snprintf() in mx4200_send() - CVE-2017-6460: Buffer Overflow in ntpq when fetching reslist - CVE-2016-9042: 0rigin (zero origin) DoS. - ntpq_stripquotes() returns incorrect Value - ereallocarray()/eallocarray() underused - Copious amounts of Unused Code - Off-by-one in Oncore GPS Receiver - Makefile does not enforce Security Flags Bugfixes : - Remove spurious log messages (bsc#1014172). - Fixing ppc and ppc64 linker issue (bsc#1031085). - clang scan-build findings - Support for openssl-1.1.0 without compatibility modes - Bugfix 3072 breaks multicastclient - forking async worker: interrupted pipe I/O - (...) time_pps_create: Exec format error - Incorrect Logic for Peer Event Limiting - Change the process name of forked DNS worker - Trap Configuration Fail - Nothing happens if minsane - allow -4/-6 on restrict line with mask - out-of-bound pointers in ctl_putsys and decode_bitflags - Move ntp-kod to /var/lib/ntp, because /var/db is not a standard directory and causes problems for transactional updates. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1014172" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1030050" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1031085" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2016-9042/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-6451/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-6458/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-6460/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-6462/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-6463/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-6464/" ); # https://www.suse.com/support/update/announcement/2017/suse-su-20171052-1/ script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?1dfa73fc" ); script_set_attribute( attribute:"solution", value: "To install this SUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product : SUSE Linux Enterprise Server 11-SP4:zypper in -t patch slessp4-ntp-13066=1 SUSE Linux Enterprise Debuginfo 11-SP4:zypper in -t patch dbgsp4-ntp-13066=1 To bring your system up-to-date, use 'zypper patch'." ); script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:S/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"exploit_available", value:"false"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:ntp"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:ntp-doc"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:11"); script_set_attribute(attribute:"vuln_publication_date", value:"2017/03/27"); script_set_attribute(attribute:"patch_publication_date", value:"2017/04/18"); script_set_attribute(attribute:"plugin_publication_date", value:"2017/04/19"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE"); os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE"); os_ver = os_ver[1]; if (! preg(pattern:"^(SLES11)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES11", "SUSE " + os_ver); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu); sp = get_kb_item("Host/SuSE/patchlevel"); if (isnull(sp)) sp = "0"; if (os_ver == "SLES11" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLES11 SP4", os_ver + " SP" + sp); flag = 0; if (rpm_check(release:"SLES11", sp:"4", reference:"ntp-4.2.8p10-63.1")) flag++; if (rpm_check(release:"SLES11", sp:"4", reference:"ntp-doc-4.2.8p10-63.1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "ntp"); }
NASL family Huawei Local Security Checks NASL id EULEROS_SA-2017-1125.NASL description According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - ntpq in NTP before 4.2.8p7 allows remote attackers to obtain origin timestamps and then impersonate peers via unspecified vectors.(CVE-2015-8139) - NTP before 4.2.8p7 and 4.3.x before 4.3.92, when mode7 is enabled, allows remote attackers to cause a denial of service (ntpd abort) by using the same IP address multiple times in an unconfig directive.(CVE-2016-2516) - The process_packet function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (peer-variable modification) by sending spoofed packets from many source IP addresses in a certain scenario, as demonstrated by triggering an incorrect leap indication.(CVE-2016-4954) - ntpd in NTP 4.x before 4.2.8p8, when autokey is enabled, allows remote attackers to cause a denial of service (peer-variable clearing and association outage) by sending (1) a spoofed crypto-NAK packet or (2) a packet with an incorrect MAC value at a certain time.(CVE-2016-4955) - ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (interleaved-mode transition and time change) via a spoofed broadcast packet. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-1548.(CVE-2016-4956) - Buffer overflow in the legacy Datum Programmable Time Server (DPTS) refclock driver in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via a crafted /dev/datum device.(CVE-2017-6462) - NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option.(CVE-2017-6463) - NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive.(CVE-2017-6464) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-05-06 modified 2017-07-10 plugin id 101311 published 2017-07-10 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/101311 title EulerOS 2.0 SP2 : ntp (EulerOS-SA-2017-1125) code # # (C) Tenable Network Security, Inc. # include("compat.inc"); if (description) { script_id(101311); script_version("3.14"); script_set_attribute(attribute:"plugin_modification_date", value:"2020/05/04"); script_cve_id( "CVE-2015-8139", "CVE-2016-2516", "CVE-2016-4954", "CVE-2016-4955", "CVE-2016-4956", "CVE-2017-6462", "CVE-2017-6463", "CVE-2017-6464" ); script_name(english:"EulerOS 2.0 SP2 : ntp (EulerOS-SA-2017-1125)"); script_summary(english:"Checks the rpm output for the updated packages."); script_set_attribute(attribute:"synopsis", value: "The remote EulerOS host is missing multiple security updates."); script_set_attribute(attribute:"description", value: "According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - ntpq in NTP before 4.2.8p7 allows remote attackers to obtain origin timestamps and then impersonate peers via unspecified vectors.(CVE-2015-8139) - NTP before 4.2.8p7 and 4.3.x before 4.3.92, when mode7 is enabled, allows remote attackers to cause a denial of service (ntpd abort) by using the same IP address multiple times in an unconfig directive.(CVE-2016-2516) - The process_packet function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (peer-variable modification) by sending spoofed packets from many source IP addresses in a certain scenario, as demonstrated by triggering an incorrect leap indication.(CVE-2016-4954) - ntpd in NTP 4.x before 4.2.8p8, when autokey is enabled, allows remote attackers to cause a denial of service (peer-variable clearing and association outage) by sending (1) a spoofed crypto-NAK packet or (2) a packet with an incorrect MAC value at a certain time.(CVE-2016-4955) - ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (interleaved-mode transition and time change) via a spoofed broadcast packet. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-1548.(CVE-2016-4956) - Buffer overflow in the legacy Datum Programmable Time Server (DPTS) refclock driver in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via a crafted /dev/datum device.(CVE-2017-6462) - NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option.(CVE-2017-6463) - NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive.(CVE-2017-6464) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues."); # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2017-1125 script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?319f2a38"); script_set_attribute(attribute:"solution", value: "Update the affected ntp packages."); script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:N/A:C"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"patch_publication_date", value:"2017/06/20"); script_set_attribute(attribute:"plugin_publication_date", value:"2017/07/10"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:ntp"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:ntpdate"); script_set_attribute(attribute:"cpe", value:"cpe:/o:huawei:euleros:2.0"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_family(english:"Huawei Local Security Checks"); script_copyright(english:"This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/EulerOS/release", "Host/EulerOS/rpm-list", "Host/EulerOS/sp"); script_exclude_keys("Host/EulerOS/uvp_version"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/EulerOS/release"); if (isnull(release) || release !~ "^EulerOS") audit(AUDIT_OS_NOT, "EulerOS"); if (release !~ "^EulerOS release 2\.0(\D|$)") audit(AUDIT_OS_NOT, "EulerOS 2.0"); sp = get_kb_item("Host/EulerOS/sp"); if (isnull(sp) || sp !~ "^(2)$") audit(AUDIT_OS_NOT, "EulerOS 2.0 SP2"); uvp = get_kb_item("Host/EulerOS/uvp_version"); if (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, "EulerOS 2.0 SP2", "EulerOS UVP " + uvp); if (!get_kb_item("Host/EulerOS/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "aarch64" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "EulerOS", cpu); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_ARCH_NOT, "i686 / x86_64", cpu); flag = 0; pkgs = ["ntp-4.2.6p5-25.0.1.h6", "ntpdate-4.2.6p5-25.0.1.h6"]; foreach (pkg in pkgs) if (rpm_check(release:"EulerOS-2.0", sp:"2", reference:pkg)) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_HOLE, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "ntp"); }
NASL family Huawei Local Security Checks NASL id EULEROS_SA-2017-1124.NASL description According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - ntpq in NTP before 4.2.8p7 allows remote attackers to obtain origin timestamps and then impersonate peers via unspecified vectors.i1/4^CVE-2015-8139i1/4%0 - NTP before 4.2.8p7 and 4.3.x before 4.3.92, when mode7 is enabled, allows remote attackers to cause a denial of service (ntpd abort) by using the same IP address multiple times in an unconfig directive.i1/4^CVE-2016-2516i1/4%0 - The process_packet function in ntp_proto.c in ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (peer-variable modification) by sending spoofed packets from many source IP addresses in a certain scenario, as demonstrated by triggering an incorrect leap indication.i1/4^CVE-2016-4954i1/4%0 - ntpd in NTP 4.x before 4.2.8p8, when autokey is enabled, allows remote attackers to cause a denial of service (peer-variable clearing and association outage) by sending (1) a spoofed crypto-NAK packet or (2) a packet with an incorrect MAC value at a certain time.i1/4^CVE-2016-4955i1/4%0 - ntpd in NTP 4.x before 4.2.8p8 allows remote attackers to cause a denial of service (interleaved-mode transition and time change) via a spoofed broadcast packet. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-1548.i1/4^CVE-2016-4956i1/4%0 - Buffer overflow in the legacy Datum Programmable Time Server (DPTS) refclock driver in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via a crafted /dev/datum device.i1/4^CVE-2017-6462i1/4%0 - NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option.i1/4^CVE-2017-6463i1/4%0 - NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive.i1/4^CVE-2017-6464i1/4%0 Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-05-06 modified 2017-07-10 plugin id 101310 published 2017-07-10 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/101310 title EulerOS 2.0 SP1 : ntp (EulerOS-SA-2017-1124) NASL family Ubuntu Local Security Checks NASL id UBUNTU_USN-3349-1.NASL description Yihan Lian discovered that NTP incorrectly handled certain large request data values. A remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. This issue only affected Ubuntu 16.04 LTS. (CVE-2016-2519) Miroslav Lichvar discovered that NTP incorrectly handled certain spoofed addresses when performing rate limiting. A remote attacker could possibly use this issue to perform a denial of service. This issue only affected Ubuntu 14.04 LTS, Ubuntu 16.04 LTS, and Ubuntu 16.10. (CVE-2016-7426) Matthew Van Gundy discovered that NTP incorrectly handled certain crafted broadcast mode packets. A remote attacker could possibly use this issue to perform a denial of service. This issue only affected Ubuntu 14.04 LTS, Ubuntu 16.04 LTS, and Ubuntu 16.10. (CVE-2016-7427, CVE-2016-7428) Miroslav Lichvar discovered that NTP incorrectly handled certain responses. A remote attacker could possibly use this issue to perform a denial of service. This issue only affected Ubuntu 14.04 LTS, Ubuntu 16.04 LTS, and Ubuntu 16.10. (CVE-2016-7429) Sharon Goldberg and Aanchal Malhotra discovered that NTP incorrectly handled origin timestamps of zero. A remote attacker could possibly use this issue to bypass the origin timestamp protection mechanism. This issue only affected Ubuntu 16.10. (CVE-2016-7431) Brian Utterback, Sharon Goldberg and Aanchal Malhotra discovered that NTP incorrectly performed initial sync calculations. This issue only applied to Ubuntu 16.04 LTS and Ubuntu 16.10. (CVE-2016-7433) Magnus Stubman discovered that NTP incorrectly handled certain mrulist queries. A remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. This issue only affected Ubuntu 16.04 LTS and Ubuntu 16.10. (CVE-2016-7434) Matthew Van Gund discovered that NTP incorrectly handled origin timestamp checks. A remote attacker could possibly use this issue to perform a denial of service. This issue only affected Ubuntu Ubuntu 16.10, and Ubuntu 17.04. (CVE-2016-9042) Matthew Van Gundy discovered that NTP incorrectly handled certain control mode packets. A remote attacker could use this issue to set or unset traps. This issue only applied to Ubuntu 14.04 LTS, Ubuntu 16.04 LTS and Ubuntu 16.10. (CVE-2016-9310) Matthew Van Gundy discovered that NTP incorrectly handled the trap service. A remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. This issue only applied to Ubuntu 14.04 LTS, Ubuntu 16.04 LTS and Ubuntu 16.10. (CVE-2016-9311) It was discovered that NTP incorrectly handled memory when processing long variables. A remote authenticated user could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2017-6458) It was discovered that NTP incorrectly handled memory when processing long variables. A remote authenticated user could possibly use this issue to cause NTP to crash, resulting in a denial of service. This issue only applied to Ubuntu 16.04 LTS, Ubuntu 16.10 and Ubuntu 17.04. (CVE-2017-6460) It was discovered that the NTP legacy DPTS refclock driver incorrectly handled the /dev/datum device. A local attacker could possibly use this issue to cause a denial of service. (CVE-2017-6462) It was discovered that NTP incorrectly handled certain invalid settings in a :config directive. A remote authenticated user could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2017-6463) It was discovered that NTP incorrectly handled certain invalid mode configuration directives. A remote authenticated user could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2017-6464). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 101263 published 2017-07-06 reporter Ubuntu Security Notice (C) 2017-2019 Canonical, Inc. / NASL script (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/101263 title Ubuntu 14.04 LTS / 16.04 LTS / 16.10 / 17.04 : ntp vulnerabilities (USN-3349-1) NASL family Misc. NASL id NTP_4_2_8P10.NASL description The version of the remote NTP server is 4.x prior to 4.2.8p10. It is, therefore, affected by the following vulnerabilities : - A denial of service vulnerability exists in the receive() function within file ntpd/ntp_proto.c due to the expected origin timestamp being cleared when a packet with a zero origin timestamp is received. An unauthenticated, remote attacker can exploit this issue, via specially crafted network packets, to reset the expected origin timestamp for a target peer, resulting in legitimate replies being dropped. (CVE-2016-9042) - An out-of-bounds write error exists in the mx4200_send() function within file ntpd/refclock_mx4200.c due to improper handling of the return value of the snprintf() and vsnprintf() functions. An unauthenticated, remote attacker can exploit this to cause a denial of service condition or possibly the execution of arbitrary code. However, neither the researcher nor vendor could find any exploitable code path. (CVE-2017-6451) - A stack-based buffer overflow condition exists in the addSourceToRegistry() function within file ports/winnt/instsrv/instsrv.c due to improper validation of certain input when adding registry keys. A local attacker can exploit this to execute arbitrary code. (CVE-2017-6452) - A flaw exists due to dynamic link library (DLL) files being preloaded when they are defined in the inherited environment variable last seen 2020-06-01 modified 2020-06-02 plugin id 97988 published 2017-03-27 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/97988 title Network Time Protocol Daemon (ntpd) 4.x < 4.2.8p10 Multiple Vulnerabilities NASL family Red Hat Local Security Checks NASL id REDHAT-RHSA-2018-0855.NASL description An update for ntp is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 108989 published 2018-04-11 reporter This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/108989 title RHEL 7 : ntp (RHSA-2018:0855) NASL family PhotonOS Local Security Checks NASL id PHOTONOS_PHSA-2017-0010.NASL description An update of [binutils,ntp,libarchive] packages for PhotonOS has been released. last seen 2019-02-21 modified 2019-02-07 plugin id 111859 published 2018-08-17 reporter Tenable source https://www.tenable.com/plugins/index.php?view=single&id=111859 title Photon OS 1.0: Binutils / Libarchive / Ntp PHSA-2017-0010 (deprecated) NASL family MacOS X Local Security Checks NASL id MACOS_10_13.NASL description The remote host is running a version of Mac OS X that is prior to 10.10.5, 10.11.x prior to 10.11.6, 10.12.x prior to 10.12.6, or is not macOS 10.13. It is, therefore, affected by multiple vulnerabilities in the following components : - apache - AppSandbox - AppleScript - Application Firewall - ATS - Audio - CFNetwork - CFNetwork Proxies - CFString - Captive Network Assistant - CoreAudio - CoreText - DesktopServices - Directory Utility - file - Fonts - fsck_msdos - HFS - Heimdal - HelpViewer - IOFireWireFamily - ImageIO - Installer - Kernel - kext tools - libarchive - libc - libexpat - Mail - Mail Drafts - ntp - Open Scripting Architecture - PCRE - Postfix - Quick Look - QuickTime - Remote Management - SQLite - Sandbox - Screen Lock - Security - Spotlight - WebKit - zlib Note that successful exploitation of the most serious issues can result in arbitrary code execution. last seen 2020-06-01 modified 2020-06-02 plugin id 103598 published 2017-10-03 reporter This script is Copyright (C) 2017-2018 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/103598 title macOS < 10.13 Multiple Vulnerabilities NASL family Fedora Local Security Checks NASL id FEDORA_2017-72323A442F.NASL description Security fix for CVE-2017-6464 CVE-2017-6462 CVE-2017-6463 CVE-2017-6458 CVE-2017-6451. Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-04-19 plugin id 99445 published 2017-04-19 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/99445 title Fedora 24 : ntp (2017-72323a442f) NASL family F5 Networks Local Security Checks NASL id F5_BIGIP_SOL02951273.NASL description NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option. (CVE-2017-6463) last seen 2020-03-17 modified 2017-12-21 plugin id 105398 published 2017-12-21 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/105398 title F5 Networks BIG-IP : NTP vulnerability (K02951273) NASL family CentOS Local Security Checks NASL id CENTOS_RHSA-2017-3071.NASL description An update for ntp is now available for Red Hat Enterprise Linux 6. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 104217 published 2017-10-30 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/104217 title CentOS 6 : ntp (CESA-2017:3071) NASL family Virtuozzo Local Security Checks NASL id VIRTUOZZO_VZLSA-2017-3071.NASL description An update for ntp is now available for Red Hat Enterprise Linux 6. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 119235 published 2018-11-27 reporter This script is Copyright (C) 2018 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/119235 title Virtuozzo 6 : ntp / ntp-doc / ntp-perl / ntpdate (VZLSA-2017-3071) NASL family Fedora Local Security Checks NASL id FEDORA_2017-20D54B2782.NASL description Security fix for CVE-2017-6464 CVE-2017-6462 CVE-2017-6463 CVE-2017-6458 CVE-2017-6451 CVE-2017-6460 CVE-2016-9042. ---- This update improves the default configuration file to use the pool directive. It also replaces the ntpstat program with a shell script that uses the ntpq program instead of implementing the mode 6 protocol. Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-07-17 plugin id 101588 published 2017-07-17 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/101588 title Fedora 26 : ntp (2017-20d54b2782) NASL family Scientific Linux Local Security Checks NASL id SL_20180410_NTP_ON_SL7_X.NASL description Security Fix(es) : - ntp: Authenticated DoS via Malicious Config Option (CVE-2017-6463) - ntp: Denial of Service via Malformed Config (CVE-2017-6464) - ntp: Buffer Overflow in DPTS Clock (CVE-2017-6462) Additional Changes : last seen 2020-03-18 modified 2018-05-01 plugin id 109453 published 2018-05-01 reporter This script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/109453 title Scientific Linux Security Update : ntp on SL7.x x86_64 (20180410) NASL family Amazon Linux Local Security Checks NASL id ALA_ALAS-2017-816.NASL description Denial of Service via Malformed Config : A vulnerability was discovered in the NTP server last seen 2020-06-01 modified 2020-06-02 plugin id 99529 published 2017-04-21 reporter This script is Copyright (C) 2017-2018 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/99529 title Amazon Linux AMI : ntp (ALAS-2017-816) NASL family NewStart CGSL Local Security Checks NASL id NEWSTART_CGSL_NS-SA-2019-0029_NTP.NASL description The remote NewStart CGSL host, running version CORE 5.04 / MAIN 5.04, has ntp packages installed that are affected by multiple vulnerabilities: - A vulnerability was discovered in the NTP server last seen 2020-06-01 modified 2020-06-02 plugin id 127193 published 2019-08-12 reporter This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/127193 title NewStart CGSL CORE 5.04 / MAIN 5.04 : ntp Multiple Vulnerabilities (NS-SA-2019-0029) NASL family Oracle Linux Local Security Checks NASL id ORACLELINUX_ELSA-2018-0855.NASL description From Red Hat Security Advisory 2018:0855 : An update for ntp is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 109109 published 2018-04-18 reporter This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/109109 title Oracle Linux 7 : ntp (ELSA-2018-0855) NASL family NewStart CGSL Local Security Checks NASL id NEWSTART_CGSL_NS-SA-2019-0127_NTP.NASL description The remote NewStart CGSL host, running version MAIN 4.05, has ntp packages installed that are affected by multiple vulnerabilities: - A vulnerability was found in NTP, in the parsing of packets from the /dev/datum device. A malicious device could send crafted messages, causing ntpd to crash. (CVE-2017-6462) - A vulnerability was discovered in the NTP server last seen 2020-06-01 modified 2020-06-02 plugin id 127378 published 2019-08-12 reporter This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/127378 title NewStart CGSL MAIN 4.05 : ntp Multiple Vulnerabilities (NS-SA-2019-0127) NASL family OracleVM Local Security Checks NASL id ORACLEVM_OVMSA-2018-0290.NASL description The remote OracleVM system is missing necessary patches to address critical security updates : - add disable monitor to default ntp.conf [CVE-2013-5211] - fix buffer overflow in parsing of address in ntpq and ntpdc (CVE-2018-12327) - fix CVE-2016-7429 patch to work correctly on multicast client (#1422973) - fix buffer overflow in datum refclock driver (CVE-2017-6462) - fix crash with invalid unpeer command (CVE-2017-6463) - fix potential crash with invalid server command (CVE-2017-6464) last seen 2020-03-28 modified 2018-12-21 plugin id 119823 published 2018-12-21 reporter This script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/119823 title OracleVM 3.3 / 3.4 : ntp (OVMSA-2018-0290) NASL family Fedora Local Security Checks NASL id FEDORA_2017-5EBAC1C112.NASL description Security fix for CVE-2017-6464 CVE-2017-6462 CVE-2017-6463 CVE-2017-6458 CVE-2017-6451. Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-03-30 plugin id 99053 published 2017-03-30 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/99053 title Fedora 25 : ntp (2017-5ebac1c112) NASL family SuSE Local Security Checks NASL id SUSE_SU-2017-1048-1.NASL description This ntp update to version 4.2.8p10 fixes serveral issues. This updated enables leap smearing. See /usr/share/doc/packages/ntp/README.leapsmear for details. Security issues fixed (bsc#1030050) : - CVE-2017-6464: Denial of Service via Malformed Config - CVE-2017-6462: Buffer Overflow in DPTS Clock - CVE-2017-6463: Authenticated DoS via Malicious Config Option - CVE-2017-6458: Potential Overflows in ctl_put() functions - CVE-2017-6451: Improper use of snprintf() in mx4200_send() - CVE-2017-6460: Buffer Overflow in ntpq when fetching reslist - CVE-2016-9042: 0rigin (zero origin) DoS. - ntpq_stripquotes() returns incorrect Value - ereallocarray()/eallocarray() underused - Copious amounts of Unused Code - Off-by-one in Oncore GPS Receiver - Makefile does not enforce Security Flags Bugfixes : - Remove spurious log messages (bsc#1014172). - clang scan-build findings - Support for openssl-1.1.0 without compatibility modes - Bugfix 3072 breaks multicastclient - forking async worker: interrupted pipe I/O - (...) time_pps_create: Exec format error - Incorrect Logic for Peer Event Limiting - Change the process name of forked DNS worker - Trap Configuration Fail - Nothing happens if minsane - allow -4/-6 on restrict line with mask - out-of-bound pointers in ctl_putsys and decode_bitflags - Move ntp-kod to /var/lib/ntp, because /var/db is not a standard directory and causes problems for transactional updates. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 99468 published 2017-04-19 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/99468 title SUSE SLED12 / SLES12 Security Update : ntp (SUSE-SU-2017:1048-1) NASL family PhotonOS Local Security Checks NASL id PHOTONOS_PHSA-2017-0010_NTP.NASL description An update of the ntp package has been released. last seen 2020-03-17 modified 2019-02-07 plugin id 121678 published 2019-02-07 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/121678 title Photon OS 1.0: Ntp PHSA-2017-0010 NASL family FreeBSD Local Security Checks NASL id FREEBSD_PKG_3C0237F5420E11E782C514DAE9D210B8.NASL description A vulnerability was discovered in the NTP server last seen 2020-06-01 modified 2020-06-02 plugin id 100496 published 2017-05-30 reporter This script is Copyright (C) 2017-2018 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100496 title FreeBSD : FreeBSD -- Multiple vulnerabilities of ntp (3c0237f5-420e-11e7-82c5-14dae9d210b8) NASL family Huawei Local Security Checks NASL id EULEROS_SA-2019-1556.NASL description According to the versions of the ntp packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities : - A vulnerability was discovered in the NTP server last seen 2020-06-01 modified 2020-06-02 plugin id 125009 published 2019-05-14 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/125009 title EulerOS Virtualization 3.0.1.0 : ntp (EulerOS-SA-2019-1556) NASL family SuSE Local Security Checks NASL id OPENSUSE-2017-511.NASL description This ntp update to version 4.2.8p10 fixes serveral issues. This updated enables leap smearing. See /usr/share/doc/packages/ntp/README.leapsmear for details. Security issues fixed (bsc#1030050) : - CVE-2017-6464: Denial of Service via Malformed Config - CVE-2017-6462: Buffer Overflow in DPTS Clock - CVE-2017-6463: Authenticated DoS via Malicious Config Option - CVE-2017-6458: Potential Overflows in ctl_put() functions - CVE-2017-6451: Improper use of snprintf() in mx4200_send() - CVE-2017-6460: Buffer Overflow in ntpq when fetching reslist - CVE-2016-9042: 0rigin (zero origin) DoS. - ntpq_stripquotes() returns incorrect Value - ereallocarray()/eallocarray() underused - Copious amounts of Unused Code - Off-by-one in Oncore GPS Receiver - Makefile does not enforce Security Flags Bugfixes : - Remove spurious log messages (bsc#1014172). - clang scan-build findings - Support for openssl-1.1.0 without compatibility modes - Bugfix 3072 breaks multicastclient - forking async worker: interrupted pipe I/O - (...) time_pps_create: Exec format error - Incorrect Logic for Peer Event Limiting - Change the process name of forked DNS worker - Trap Configuration Fail - Nothing happens if minsane < maxclock < minclock - allow -4/-6 on restrict line with mask - out-of-bound pointers in ctl_putsys and decode_bitflags - Move ntp-kod to /var/lib/ntp, because /var/db is not a standard directory and causes problems for transactional updates. This update was imported from the SUSE:SLE-12-SP1:Update update project. last seen 2020-06-05 modified 2017-04-27 plugin id 99700 published 2017-04-27 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/99700 title openSUSE Security Update : ntp (openSUSE-2017-511) NASL family CentOS Local Security Checks NASL id CENTOS_RHSA-2018-0855.NASL description An update for ntp is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 109375 published 2018-04-27 reporter This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/109375 title CentOS 7 : ntp (CESA-2018:0855) NASL family SuSE Local Security Checks NASL id SUSE_SU-2017-1047-1.NASL description This ntp update to version 4.2.8p10 fixes serveral issues. This updated enables leap smearing. See /usr/share/doc/packages/ntp/README.leapsmear for details. Security issues fixed (bsc#1030050) : - CVE-2017-6464: Denial of Service via Malformed Config - CVE-2017-6462: Buffer Overflow in DPTS Clock - CVE-2017-6463: Authenticated DoS via Malicious Config Option - CVE-2017-6458: Potential Overflows in ctl_put() functions - CVE-2017-6451: Improper use of snprintf() in mx4200_send() - CVE-2017-6460: Buffer Overflow in ntpq when fetching reslist - CVE-2016-9042: 0rigin (zero origin) DoS. - ntpq_stripquotes() returns incorrect Value - ereallocarray()/eallocarray() underused - Copious amounts of Unused Code - Off-by-one in Oncore GPS Receiver - Makefile does not enforce Security Flags Bugfixes : - Remove spurious log messages (bsc#1014172). - clang scan-build findings - Support for openssl-1.1.0 without compatibility modes - Bugfix 3072 breaks multicastclient - forking async worker: interrupted pipe I/O - (...) time_pps_create: Exec format error - Incorrect Logic for Peer Event Limiting - Change the process name of forked DNS worker - Trap Configuration Fail - Nothing happens if minsane - allow -4/-6 on restrict line with mask - out-of-bound pointers in ctl_putsys and decode_bitflags - Move ntp-kod to /var/lib/ntp, because /var/db is not a standard directory and causes problems for transactional updates. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 99467 published 2017-04-19 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/99467 title SUSE SLES12 Security Update : ntp (SUSE-SU-2017:1047-1) NASL family Oracle Linux Local Security Checks NASL id ORACLELINUX_ELSA-2017-3071.NASL description From Red Hat Security Advisory 2017:3071 : An update for ntp is now available for Red Hat Enterprise Linux 6. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. The Network Time Protocol (NTP) is used to synchronize a computer last seen 2020-06-01 modified 2020-06-02 plugin id 104199 published 2017-10-27 reporter This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/104199 title Oracle Linux 6 : ntp (ELSA-2017-3071) NASL family Scientific Linux Local Security Checks NASL id SL_20171026_NTP_ON_SL6_X.NASL description Security Fix(es) : - Two vulnerabilities were discovered in the NTP server last seen 2020-03-18 modified 2017-10-27 plugin id 104206 published 2017-10-27 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/104206 title Scientific Linux Security Update : ntp on SL6.x i386/x86_64 (20171026) NASL family Firewalls NASL id PFSENSE_SA-17_04.NASL description According to its self-reported version number, the remote pfSense install is affected by multiple vulnerabilities as stated in the referenced vendor advisories. last seen 2020-06-01 modified 2020-06-02 plugin id 106504 published 2018-01-31 reporter This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/106504 title pfSense < 2.3.4 Multiple Vulnerabilities (SA-17_04)
Redhat
advisories |
| ||||||||
rpms |
|
References
- http://www.securitytracker.com/id/1038123
- http://support.ntp.org/bin/view/Main/SecurityNotice#March_2017_ntp_4_2_8p10_NTP_Secu
- http://support.ntp.org/bin/view/Main/NtpBug3387
- http://www.securityfocus.com/bid/97049
- https://support.apple.com/HT208144
- https://security.FreeBSD.org/advisories/FreeBSD-SA-17:03.ntp.asc
- https://access.redhat.com/errata/RHSA-2017:3071
- https://access.redhat.com/errata/RHSA-2018:0855
- https://usn.ubuntu.com/3707-2/
- https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-hpesbux03962en_us