Vulnerabilities > CVE-2015-7969 - Resource Management Errors vulnerability in XEN

047910
CVSS 4.9 - MEDIUM
Attack vector
LOCAL
Attack complexity
LOW
Privileges required
NONE
Confidentiality impact
NONE
Integrity impact
NONE
Availability impact
COMPLETE
local
low complexity
xen
CWE-399
nessus

Summary

Multiple memory leaks in Xen 4.0 through 4.6.x allow local guest administrators or domains with certain permission to cause a denial of service (memory consumption) via a large number of "teardowns" of domains with the vcpu pointer array allocated using the (1) XEN_DOMCTL_max_vcpus hypercall or the xenoprofile state vcpu pointer array allocated using the (2) XENOPROF_get_buffer or (3) XENOPROF_set_passive hypercall.

Common Weakness Enumeration (CWE)

Nessus

  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2015-750.NASL
    descriptionxen was updated to fix 12 security issues. These security issues were fixed : - CVE-2015-7972: Populate-on-demand balloon size inaccuracy can crash guests (bsc#951845). - CVE-2015-7969: Leak of main per-domain vcpu pointer array (DoS) (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling-related vcpu pointer array (DoS) (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). - CVE-2015-4037: Insecure temporary file use in /net/slirp.c (bsc#932267). - CVE-2014-0222: Validate L2 table size to avoid integer overflows (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl fails to honour readonly flag on disks with qemu-xen (bsc#947165). - CVE-2015-5165: QEMU leak of uninitialized heap memory in rtl8139 device model (bsc#939712). - CVE-2015-5166: Use after free in QEMU/Xen block unplug protocol (bsc#939709). - CVE-2015-5154: Host code execution via IDE subsystem CD-ROM (bsc#938344). - CVE-2015-3259: xl command line config handling stack overflow (bsc#935634). These non-security issues were fixed : - bsc#907514: Bus fatal error and sles12 sudden reboot has been observed - bsc#910258: SLES12 Xen host crashes with FATAL NMI after shutdown of guest with VT-d NIC - bsc#918984: Bus fatal error and sles11-SP4 sudden reboot has been observed - bsc#923967: Partner-L3: Bus fatal error and sles11-SP3 sudden reboot has been observed - bsc#901488: Intel ixgbe driver assigns rx/tx queues per core resulting in irq problems on servers with a large amount of CPU cores - bsc#945167: Running command xl pci-assignable-add 03:10.1 secondly show errors - bsc#949138: Setting vcpu affinity under Xen causes libvirtd abort - bsc#944463: VUL-0: CVE-2015-5239: qemu-kvm: Integer overflow in vnc_client_read() and protocol_client_msg() - bsc#944697: VUL-1: CVE-2015-6815: qemu: net: e1000: infinite loop issue - bsc#925466: Kdump does not work in a XEN environment
    last seen2020-06-05
    modified2015-11-18
    plugin id86909
    published2015-11-18
    reporterThis script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86909
    titleopenSUSE Security Update : xen (openSUSE-2015-750)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from openSUSE Security Update openSUSE-2015-750.
    #
    # The text description of this plugin is (C) SUSE LLC.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(86909);
      script_version("2.3");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2014-0222", "CVE-2015-3259", "CVE-2015-4037", "CVE-2015-5154", "CVE-2015-5165", "CVE-2015-5166", "CVE-2015-5239", "CVE-2015-6815", "CVE-2015-7311", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971", "CVE-2015-7972");
    
      script_name(english:"openSUSE Security Update : xen (openSUSE-2015-750)");
      script_summary(english:"Check for the openSUSE-2015-750 patch");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote openSUSE host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "xen was updated to fix 12 security issues.
    
    These security issues were fixed :
    
      - CVE-2015-7972: Populate-on-demand balloon size
        inaccuracy can crash guests (bsc#951845).
    
      - CVE-2015-7969: Leak of main per-domain vcpu pointer
        array (DoS) (bsc#950703).
    
      - CVE-2015-7969: Leak of per-domain profiling-related vcpu
        pointer array (DoS) (bsc#950705).
    
      - CVE-2015-7971: Some pmu and profiling hypercalls log
        without rate limiting (bsc#950706).
    
      - CVE-2015-4037: Insecure temporary file use in
        /net/slirp.c (bsc#932267).
    
      - CVE-2014-0222: Validate L2 table size to avoid integer
        overflows (bsc#877642).
    
      - CVE-2015-7835: Uncontrolled creation of large page
        mappings by PV guests (bsc#950367).
    
      - CVE-2015-7311: libxl fails to honour readonly flag on
        disks with qemu-xen (bsc#947165).
    
      - CVE-2015-5165: QEMU leak of uninitialized heap memory in
        rtl8139 device model (bsc#939712).
    
      - CVE-2015-5166: Use after free in QEMU/Xen block unplug
        protocol (bsc#939709).
    
      - CVE-2015-5154: Host code execution via IDE subsystem
        CD-ROM (bsc#938344).
    
      - CVE-2015-3259: xl command line config handling stack
        overflow (bsc#935634).
    
    These non-security issues were fixed :
    
      - bsc#907514: Bus fatal error and sles12 sudden reboot has
        been observed
    
      - bsc#910258: SLES12 Xen host crashes with FATAL NMI after
        shutdown of guest with VT-d NIC
    
      - bsc#918984: Bus fatal error and sles11-SP4 sudden reboot
        has been observed
    
      - bsc#923967: Partner-L3: Bus fatal error and sles11-SP3
        sudden reboot has been observed
    
      - bsc#901488: Intel ixgbe driver assigns rx/tx queues per
        core resulting in irq problems on servers with a large
        amount of CPU cores
    
      - bsc#945167: Running command xl pci-assignable-add
        03:10.1 secondly show errors
    
      - bsc#949138: Setting vcpu affinity under Xen causes
        libvirtd abort
    
      - bsc#944463: VUL-0: CVE-2015-5239: qemu-kvm: Integer
        overflow in vnc_client_read() and protocol_client_msg()
    
      - bsc#944697: VUL-1: CVE-2015-6815: qemu: net: e1000:
        infinite loop issue
    
      - bsc#925466: Kdump does not work in a XEN environment"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=877642"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=901488"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=907514"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=910258"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=918984"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=923967"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=925466"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=932267"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=935634"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=938344"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=939709"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=939712"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=944463"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=944697"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=945167"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=947165"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=949138"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950367"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950703"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950705"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950706"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=951845"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected xen packages.");
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-devel");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-doc-html");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-default");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-default-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-desktop");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-desktop-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs-32bit");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs-debuginfo-32bit");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools-domU");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools-domU-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:13.2");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2014/11/04");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/10/30");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/11/18");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
    if (release !~ "^(SUSE13\.2)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "13.2", release);
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    ourarch = get_kb_item("Host/cpu");
    if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
    if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch);
    
    flag = 0;
    
    if ( rpm_check(release:"SUSE13.2", reference:"xen-debugsource-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", reference:"xen-devel-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", reference:"xen-libs-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", reference:"xen-libs-debuginfo-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", reference:"xen-tools-domU-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", reference:"xen-tools-domU-debuginfo-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-doc-html-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-default-4.4.3_02_k3.16.7_29-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-default-debuginfo-4.4.3_02_k3.16.7_29-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-desktop-4.4.3_02_k3.16.7_29-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-desktop-debuginfo-4.4.3_02_k3.16.7_29-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-libs-32bit-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-libs-debuginfo-32bit-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-tools-4.4.3_02-30.1") ) flag++;
    if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-tools-debuginfo-4.4.3_02-30.1") ) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen-debugsource / xen-devel / xen-libs-32bit / xen-libs / etc");
    }
    
  • NASL familyOracleVM Local Security Checks
    NASL idORACLEVM_OVMSA-2016-0081.NASL
    descriptionThe remote OracleVM system is missing necessary patches to address critical security updates : please see Oracle VM Security Advisory OVMSA-2016-0081 for details.
    last seen2020-06-01
    modified2020-06-02
    plugin id91756
    published2016-06-22
    reporterThis script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/91756
    titleOracleVM 3.2 : xen (OVMSA-2016-0081)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The package checks in this plugin were extracted from OracleVM
    # Security Advisory OVMSA-2016-0081.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(91756);
      script_version("2.6");
      script_cvs_date("Date: 2019/09/27 13:00:35");
    
      script_cve_id("CVE-2013-6375", "CVE-2014-3615", "CVE-2015-5307", "CVE-2015-7504", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971", "CVE-2015-8339", "CVE-2015-8340", "CVE-2015-8550", "CVE-2015-8554", "CVE-2015-8555", "CVE-2016-1570", "CVE-2016-1571", "CVE-2016-2270", "CVE-2016-3158", "CVE-2016-3159", "CVE-2016-3710", "CVE-2016-3712", "CVE-2016-3960");
      script_bugtraq_id(63830, 69654);
    
      script_name(english:"OracleVM 3.2 : xen (OVMSA-2016-0081)");
      script_summary(english:"Checks the RPM output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote OracleVM host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "The remote OracleVM system is missing necessary patches to address
    critical security updates : please see Oracle VM Security Advisory
    OVMSA-2016-0081 for details."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://oss.oracle.com/pipermail/oraclevm-errata/2016-June/000495.html"
      );
      script_set_attribute(
        attribute:"solution", 
        value:"Update the affected xen / xen-devel / xen-tools packages."
      );
      script_set_cvss_base_vector("CVSS2#AV:A/AC:M/Au:N/C:C/I:C/A:C");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen-devel");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen-tools");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:vm_server:3.2");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2013/11/23");
      script_set_attribute(attribute:"patch_publication_date", value:"2016/06/21");
      script_set_attribute(attribute:"plugin_publication_date", value:"2016/06/22");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"OracleVM Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/OracleVM/release", "Host/OracleVM/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/OracleVM/release");
    if (isnull(release) || "OVS" >!< release) audit(AUDIT_OS_NOT, "OracleVM");
    if (! preg(pattern:"^OVS" + "3\.2" + "(\.[0-9]|$)", string:release)) audit(AUDIT_OS_NOT, "OracleVM 3.2", "OracleVM " + release);
    if (!get_kb_item("Host/OracleVM/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "OracleVM", cpu);
    if ("x86_64" >!< cpu) audit(AUDIT_ARCH_NOT, "x86_64", cpu);
    
    flag = 0;
    if (rpm_check(release:"OVS3.2", reference:"xen-4.1.3-25.el5.223.26")) flag++;
    if (rpm_check(release:"OVS3.2", reference:"xen-devel-4.1.3-25.el5.223.26")) flag++;
    if (rpm_check(release:"OVS3.2", reference:"xen-tools-4.1.3-25.el5.223.26")) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen / xen-devel / xen-tools");
    }
    
  • NASL familyFreeBSD Local Security Checks
    NASL idFREEBSD_PKG_FC1F8795881D11E5AB94002590263BF5.NASL
    descriptionThe Xen Project reports : A domain
    last seen2020-06-01
    modified2020-06-02
    plugin id86842
    published2015-11-11
    reporterThis script is Copyright (C) 2015-2018 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86842
    titleFreeBSD : xen-kernel -- leak of main per-domain vcpu pointer array (fc1f8795-881d-11e5-ab94-002590263bf5)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were  
    # extracted from the FreeBSD VuXML database :
    #
    # Copyright 2003-2018 Jacques Vidrine and contributors
    #
    # Redistribution and use in source (VuXML) and 'compiled' forms (SGML,
    # HTML, PDF, PostScript, RTF and so forth) with or without modification,
    # are permitted provided that the following conditions are met:
    # 1. Redistributions of source code (VuXML) must retain the above
    #    copyright notice, this list of conditions and the following
    #    disclaimer as the first lines of this file unmodified.
    # 2. Redistributions in compiled form (transformed to other DTDs,
    #    published online in any format, converted to PDF, PostScript,
    #    RTF and other formats) must reproduce the above copyright
    #    notice, this list of conditions and the following disclaimer
    #    in the documentation and/or other materials provided with the
    #    distribution.
    # 
    # THIS DOCUMENTATION IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS"
    # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
    # THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
    # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
    # OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
    # OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
    # BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
    # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
    # OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENTATION,
    # EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(86842);
      script_version("2.2");
      script_cvs_date("Date: 2018/11/10 11:49:45");
    
      script_cve_id("CVE-2015-7969");
    
      script_name(english:"FreeBSD : xen-kernel -- leak of main per-domain vcpu pointer array (fc1f8795-881d-11e5-ab94-002590263bf5)");
      script_summary(english:"Checks for updated package in pkg_info output");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote FreeBSD host is missing a security-related update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "The Xen Project reports :
    
    A domain's primary array of vcpu pointers can be allocated by a
    toolstack exactly once in the lifetime of a domain via the
    XEN_DOMCTL_max_vcpus hypercall. This array is leaked on domain
    teardown. This memory leak could -- over time -- exhaust the host's
    memory.
    
    A domain given partial management control via XEN_DOMCTL_max_vcpus can
    mount a denial of service attack affecting the whole system. The
    ability to also restart or create suitable domains is also required to
    fully exploit the issue. Without this the leak is limited to a small
    multiple of the maximum number of vcpus for the domain. The maximum
    leak is 64kbytes per domain (re)boot (less on ARM)."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"http://xenbits.xen.org/xsa/advisory-149.html"
      );
      # https://vuxml.freebsd.org/freebsd/fc1f8795-881d-11e5-ab94-002590263bf5.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?a6767de3"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected package.");
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:N/I:N/A:C");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:freebsd:freebsd:xen-kernel");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:freebsd:freebsd");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2015/10/29");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/11/11");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/11/11");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2018 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"FreeBSD Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/FreeBSD/release", "Host/FreeBSD/pkg_info");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("freebsd_package.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    if (!get_kb_item("Host/FreeBSD/release")) audit(AUDIT_OS_NOT, "FreeBSD");
    if (!get_kb_item("Host/FreeBSD/pkg_info")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    
    flag = 0;
    
    if (pkg_test(save_report:TRUE, pkg:"xen-kernel<4.5.1_1")) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_warning(port:0, extra:pkg_report_get());
      else security_warning(0);
      exit(0);
    }
    else audit(AUDIT_HOST_NOT, "affected");
    
  • NASL familyDebian Local Security Checks
    NASL idDEBIAN_DSA-3414.NASL
    descriptionMultiple security issues have been found in the Xen virtualisation solution, which may result in denial of service or information disclosure.
    last seen2020-06-01
    modified2020-06-02
    plugin id87288
    published2015-12-10
    reporterThis script is Copyright (C) 2015-2018 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/87288
    titleDebian DSA-3414-1 : xen - security update
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were  
    # extracted from Debian Security Advisory DSA-3414. The text 
    # itself is copyright (C) Software in the Public Interest, Inc.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(87288);
      script_version("1.4");
      script_cvs_date("Date: 2018/11/10 11:49:37");
    
      script_cve_id("CVE-2015-3259", "CVE-2015-3340", "CVE-2015-5307", "CVE-2015-6654", "CVE-2015-7311", "CVE-2015-7812", "CVE-2015-7813", "CVE-2015-7814", "CVE-2015-7969", "CVE-2015-7970", "CVE-2015-7971", "CVE-2015-7972", "CVE-2015-8104");
      script_xref(name:"DSA", value:"3414");
    
      script_name(english:"Debian DSA-3414-1 : xen - security update");
      script_summary(english:"Checks dpkg output for the updated package");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote Debian host is missing a security-related update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "Multiple security issues have been found in the Xen virtualisation
    solution, which may result in denial of service or information
    disclosure."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://packages.debian.org/source/jessie/xen"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.debian.org/security/2015/dsa-3414"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "Upgrade the xen packages.
    
    For the oldstable distribution (wheezy), an update will be provided
    later.
    
    For the stable distribution (jessie), these problems have been fixed
    in version 4.4.1-9+deb8u3."
      );
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:xen");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:debian:debian_linux:8.0");
    
      script_set_attribute(attribute:"patch_publication_date", value:"2015/12/09");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/12/10");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2018 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"Debian Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/Debian/release", "Host/Debian/dpkg-l");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("debian_package.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    if (!get_kb_item("Host/Debian/release")) audit(AUDIT_OS_NOT, "Debian");
    if (!get_kb_item("Host/Debian/dpkg-l")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    
    flag = 0;
    if (deb_check(release:"8.0", prefix:"libxen-4.4", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"libxen-dev", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"libxenstore3.0", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-hypervisor-4.4-amd64", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-hypervisor-4.4-arm64", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-hypervisor-4.4-armhf", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-system-amd64", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-system-arm64", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-system-armhf", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-utils-4.4", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xen-utils-common", reference:"4.4.1-9+deb8u3")) flag++;
    if (deb_check(release:"8.0", prefix:"xenstore-utils", reference:"4.4.1-9+deb8u3")) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_warning(port:0, extra:deb_report_get());
      else security_warning(0);
      exit(0);
    }
    else audit(AUDIT_HOST_NOT, "affected");
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-1894-1.NASL
    descriptionxen was updated to version 4.4.3 to fix nine security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl in Xen did not properly handle the readonly flag on disks when using the qemu-xen device model, which allowed local guest users to write to a read-only disk image (bsc#947165). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id86753
    published2015-11-05
    reporterThis script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86753
    titleSUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:1894-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2015:1894-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(86753);
      script_version("2.9");
      script_cvs_date("Date: 2020/01/30");
    
      script_cve_id("CVE-2014-0222", "CVE-2015-4037", "CVE-2015-5239", "CVE-2015-6815", "CVE-2015-7311", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971");
      script_bugtraq_id(67357, 74809);
    
      script_name(english:"SUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:1894-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "xen was updated to version 4.4.3 to fix nine security issues.
    
    These security issues were fixed :
    
      - CVE-2015-4037: The slirp_smb function in net/slirp.c
        created temporary files with predictable names, which
        allowed local users to cause a denial of service
        (instantiation failure) by creating /tmp/qemu-smb.*-*
        files before the program (bsc#932267).
    
      - CVE-2014-0222: Integer overflow in the qcow_open
        function allowed remote attackers to cause a denial of
        service (crash) via a large L2 table in a QCOW version 1
        image (bsc#877642).
    
      - CVE-2015-7835: Uncontrolled creation of large page
        mappings by PV guests (bsc#950367).
    
      - CVE-2015-7311: libxl in Xen did not properly handle the
        readonly flag on disks when using the qemu-xen device
        model, which allowed local guest users to write to a
        read-only disk image (bsc#947165).
    
      - CVE-2015-5239: Integer overflow in vnc_client_read() and
        protocol_client_msg() (bsc#944463).
    
      - CVE-2015-6815: With e1000 NIC emulation support it was
        possible to enter an infinite loop (bsc#944697).
    
      - CVE-2015-7969: Leak of main per-domain vcpu pointer
        array leading to denial of service (bsc#950703).
    
      - CVE-2015-7969: Leak of per-domain profiling- related
        vcpu pointer array leading to denial of service
        (bsc#950705).
    
      - CVE-2015-7971: Some pmu and profiling hypercalls log
        without rate limiting (bsc#950706).
    
    The update package also includes non-security fixes. See advisory for
    details.
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=877642"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=901488"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=907514"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=910258"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=918984"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=923967"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=932267"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=944463"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=944697"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=945167"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=947165"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=949138"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=949549"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950367"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950703"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950705"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950706"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-0222/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-4037/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-5239/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-6815/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7311/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7835/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7969/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7971/"
      );
      # https://www.suse.com/support/update/announcement/2015/suse-su-20151894-1.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?0b19ec80"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use YaST online_update.
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Software Development Kit 11-SP4 :
    
    zypper in -t patch sdksp4-xen-12184=1
    
    SUSE Linux Enterprise Server 11-SP4 :
    
    zypper in -t patch slessp4-xen-12184=1
    
    SUSE Linux Enterprise Desktop 11-SP4 :
    
    zypper in -t patch sledsp4-xen-12184=1
    
    SUSE Linux Enterprise Debuginfo 11-SP4 :
    
    zypper in -t patch dbgsp4-xen-12184=1
    
    To bring your system up-to-date, use 'zypper patch'."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-doc-html");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-default");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-pae");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-libs");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-tools-domU");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:11");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2014/11/04");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/10/29");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/11/05");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED11|SLES11)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED11 / SLES11", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    if (cpu >!< "i386|i486|i586|i686|x86_64") audit(AUDIT_ARCH_NOT, "i386 / i486 / i586 / i686 / x86_64", cpu);
    
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES11" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLES11 SP4", os_ver + " SP" + sp);
    if (os_ver == "SLED11" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLED11 SP4", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-kmp-default-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-libs-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-tools-domU-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-doc-html-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-libs-32bit-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-tools-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-kmp-pae-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-kmp-default-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-libs-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-tools-domU-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-kmp-pae-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-kmp-default-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-libs-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-tools-domU-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-doc-html-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-libs-32bit-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-tools-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-kmp-pae-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-kmp-default-4.4.3_02_3.0.101_65-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-libs-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-tools-domU-4.4.3_02-26.2")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-kmp-pae-4.4.3_02_3.0.101_65-26.2")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-1952-1.NASL
    descriptionxen was updated to fix eight security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id86865
    published2015-11-13
    reporterThis script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86865
    titleSUSE SLES11 Security Update : xen (SUSE-SU-2015:1952-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2015:1952-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(86865);
      script_version("2.8");
      script_cvs_date("Date: 2020/01/30");
    
      script_cve_id("CVE-2014-0222", "CVE-2015-4037", "CVE-2015-5239", "CVE-2015-6815", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971");
      script_bugtraq_id(67357, 74809);
    
      script_name(english:"SUSE SLES11 Security Update : xen (SUSE-SU-2015:1952-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "xen was updated to fix eight security issues.
    
    These security issues were fixed :
    
      - CVE-2015-4037: The slirp_smb function in net/slirp.c
        created temporary files with predictable names, which
        allowed local users to cause a denial of service
        (instantiation failure) by creating /tmp/qemu-smb.*-*
        files before the program (bsc#932267).
    
      - CVE-2014-0222: Integer overflow in the qcow_open
        function allowed remote attackers to cause a denial of
        service (crash) via a large L2 table in a QCOW version 1
        image (bsc#877642).
    
      - CVE-2015-7835: Uncontrolled creation of large page
        mappings by PV guests (bsc#950367).
    
      - CVE-2015-5239: Integer overflow in vnc_client_read() and
        protocol_client_msg() (bsc#944463).
    
      - CVE-2015-6815: With e1000 NIC emulation support it was
        possible to enter an infinite loop (bsc#944697).
    
      - CVE-2015-7969: Leak of main per-domain vcpu pointer
        array leading to denial of service (bsc#950703).
    
      - CVE-2015-7969: Leak of per-domain profiling- related
        vcpu pointer array leading to denial of service
        (bsc#950705).
    
      - CVE-2015-7971: Some pmu and profiling hypercalls log
        without rate limiting (bsc#950706).
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=877642"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=932267"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=944463"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=944697"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950367"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950703"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950705"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950706"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-0222/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-4037/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-5239/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-6815/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7835/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7969/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7971/"
      );
      # https://www.suse.com/support/update/announcement/2015/suse-su-20151952-1.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?073169ce"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use YaST online_update.
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Server 11-SP2-LTSS :
    
    zypper in -t patch slessp2-xen-12199=1
    
    SUSE Linux Enterprise Debuginfo 11-SP2 :
    
    zypper in -t patch dbgsp2-xen-12199=1
    
    To bring your system up-to-date, use 'zypper patch'."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-devel");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-doc-html");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-doc-pdf");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-default");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-pae");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-trace");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-libs");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-tools-domU");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:11");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2014/11/04");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/10/29");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/11/13");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLES11)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES11", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    if (cpu >!< "i386|i486|i586|i686|x86_64") audit(AUDIT_ARCH_NOT, "i386 / i486 / i586 / i686 / x86_64", cpu);
    
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES11" && (! preg(pattern:"^(2)$", string:sp))) audit(AUDIT_OS_NOT, "SLES11 SP2", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-devel-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-kmp-default-4.1.6_08_3.0.101_0.7.37-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-kmp-trace-4.1.6_08_3.0.101_0.7.37-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-libs-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-tools-domU-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-doc-html-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-doc-pdf-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-libs-32bit-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-tools-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"x86_64", reference:"xen-kmp-pae-4.1.6_08_3.0.101_0.7.37-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"i586", reference:"xen-devel-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"i586", reference:"xen-kmp-default-4.1.6_08_3.0.101_0.7.37-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"i586", reference:"xen-kmp-trace-4.1.6_08_3.0.101_0.7.37-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"i586", reference:"xen-libs-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"i586", reference:"xen-tools-domU-4.1.6_08-20.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"2", cpu:"i586", reference:"xen-kmp-pae-4.1.6_08_3.0.101_0.7.37-20.1")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen");
    }
    
  • NASL familyOracleVM Local Security Checks
    NASL idORACLEVM_OVMSA-2015-0143.NASL
    descriptionThe remote OracleVM system is missing necessary patches to address critical security updates : - x86: rate-limit logging in do_xen[oprof,pmu]_op Some of the sub-ops are acessible to all guests, and hence should be rate-limited. In the xenoprof case, just like for XSA-146, include them only in debug builds. Since the vPMU code is rather new, allow them to be always present, but downgrade them to (rate limited) guest messages. This is XSA-152. (CVE-2015-7971) - xenoprof: free domain
    last seen2020-06-01
    modified2020-06-02
    plugin id86802
    published2015-11-09
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86802
    titleOracleVM 3.2 : xen (OVMSA-2015-0143)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The package checks in this plugin were extracted from OracleVM
    # Security Advisory OVMSA-2015-0143.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(86802);
      script_version("2.5");
      script_cvs_date("Date: 2019/09/27 13:00:34");
    
      script_cve_id("CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971");
    
      script_name(english:"OracleVM 3.2 : xen (OVMSA-2015-0143)");
      script_summary(english:"Checks the RPM output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote OracleVM host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "The remote OracleVM system is missing necessary patches to address
    critical security updates :
    
      - x86: rate-limit logging in do_xen[oprof,pmu]_op Some of
        the sub-ops are acessible to all guests, and hence
        should be rate-limited. In the xenoprof case, just like
        for XSA-146, include them only in debug builds. Since
        the vPMU code is rather new, allow them to be always
        present, but downgrade them to (rate limited) guest
        messages. This is XSA-152. (CVE-2015-7971)
    
      - xenoprof: free domain's vcpu array This was overlooked
        in fb442e2171 ('x86_64: allow more vCPU-s per guest').
        This is XSA-151. (CVE-2015-7969)
    
      - x86: guard against undue super page PTE creation When
        optional super page support got added (commit bd1cd81d64
        'x86: PV support for hugepages'), two adjustments were
        missed: mod_l2_entry needs to consider the PSE and RW
        bits when deciding whether to use the fast path, and the
        PSE bit must not be removed from L2_DISALLOW_MASK
        unconditionally. This is XSA-148.
    
        [backport to Xen 4.1] (CVE-2015-7835)"
      );
      # https://oss.oracle.com/pipermail/oraclevm-errata/2015-November/000393.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?4eaa61d7"
      );
      script_set_attribute(
        attribute:"solution", 
        value:"Update the affected xen / xen-devel / xen-tools packages."
      );
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:C/I:C/A:C");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen-devel");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen-tools");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:vm_server:3.2");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2015/10/30");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/11/06");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/11/09");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"OracleVM Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/OracleVM/release", "Host/OracleVM/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/OracleVM/release");
    if (isnull(release) || "OVS" >!< release) audit(AUDIT_OS_NOT, "OracleVM");
    if (! preg(pattern:"^OVS" + "3\.2" + "(\.[0-9]|$)", string:release)) audit(AUDIT_OS_NOT, "OracleVM 3.2", "OracleVM " + release);
    if (!get_kb_item("Host/OracleVM/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "OracleVM", cpu);
    if ("x86_64" >!< cpu) audit(AUDIT_ARCH_NOT, "x86_64", cpu);
    
    flag = 0;
    if (rpm_check(release:"OVS3.2", reference:"xen-4.1.3-25.el5.209.4")) flag++;
    if (rpm_check(release:"OVS3.2", reference:"xen-devel-4.1.3-25.el5.209.4")) flag++;
    if (rpm_check(release:"OVS3.2", reference:"xen-tools-4.1.3-25.el5.209.4")) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen / xen-devel / xen-tools");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-2338-1.NASL
    descriptionThis update fixes the following security issues : - bsc#955399 - Fix xm migrate --log_progress. Due to logic error progress was not logged when requested. - bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list - bsc#956592 - xen: virtual PMU is unsupported (XSA-163) - bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159) - bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160) - bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162) - bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142) - bsc#955399 - Fix xm migrate --live. The options were not passed due to a merge error. As a result the migration was not live, instead the suspended guest was migrated. - bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception - bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156) - bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) - bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153) - Drop 5604f239-x86-PV-properly-populate-descriptor-tables.patc h - bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149) - bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151) - bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id87650
    published2015-12-29
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/87650
    titleSUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:2338-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2015:2338-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(87650);
      script_version("2.7");
      script_cvs_date("Date: 2019/09/11 11:22:12");
    
      script_cve_id("CVE-2015-5307", "CVE-2015-7311", "CVE-2015-7504", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7970", "CVE-2015-7971", "CVE-2015-7972", "CVE-2015-8104", "CVE-2015-8339", "CVE-2015-8340", "CVE-2015-8341", "CVE-2015-8345");
    
      script_name(english:"SUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:2338-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update fixes the following security issues :
    
      - bsc#955399 - Fix xm migrate --log_progress. Due to logic
        error progress was not logged when requested.
    
      - bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100:
        infinite loop in processing command block list
    
      - bsc#956592 - xen: virtual PMU is unsupported (XSA-163)
    
      - bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen:
        XENMEM_exchange error handling issues (XSA-159)
    
      - bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel
        and initrd on error (XSA-160)
    
      - bsc#956411 - CVE-2015-7504: xen: heap buffer overflow
        vulnerability in pcnet emulator (XSA-162)
    
      - bsc#947165 - CVE-2015-7311: xen: libxl fails to honour
        readonly flag on disks with qemu-xen (xsa-142)
    
      - bsc#955399 - Fix xm migrate --live. The options were not
        passed due to a merge error. As a result the migration
        was not live, instead the suspended guest was migrated.
    
      - bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by
        triggering an infinite loop in microcode via #DB
        exception
    
      - bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during
        fault delivery (XSA-156)
    
      - bsc#950704 - CVE-2015-7970: xen: x86: Long latency
        populate-on-demand operation is not preemptible
        (XSA-150)
    
      - bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand
        balloon size inaccuracy can crash guests (XSA-153)
    
      - Drop
        5604f239-x86-PV-properly-populate-descriptor-tables.patc
        h
    
      - bsc#950703 - CVE-2015-7969: xen: leak of main per-domain
        vcpu pointer array (DoS) (XSA-149)
    
      - bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain
        profiling-related vcpu pointer array (DoS) (XSA-151)
    
      - bsc#950706 - CVE-2015-7971: xen: x86: some pmu and
        profiling hypercalls log without rate limiting (XSA-152)
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=947165"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950703"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950704"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950705"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=950706"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=951845"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=954018"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=954405"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=955399"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=956408"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=956409"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=956411"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=956592"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=956832"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-5307/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7311/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7504/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7835/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7969/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7970/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7971/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-7972/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-8104/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-8339/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-8340/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-8341/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2015-8345/"
      );
      # https://www.suse.com/support/update/announcement/2015/suse-su-20152338-1.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?37a07182"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use YaST online_update.
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Software Development Kit 11-SP4 :
    
    zypper in -t patch sdksp4-xen-20151203-12277=1
    
    SUSE Linux Enterprise Server 11-SP4 :
    
    zypper in -t patch slessp4-xen-20151203-12277=1
    
    SUSE Linux Enterprise Desktop 11-SP4 :
    
    zypper in -t patch sledsp4-xen-20151203-12277=1
    
    SUSE Linux Enterprise Debuginfo 11-SP4 :
    
    zypper in -t patch dbgsp4-xen-20151203-12277=1
    
    To bring your system up-to-date, use 'zypper patch'."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:N/I:N/A:C");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-doc-html");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-default");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-kmp-pae");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-libs");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:xen-tools-domU");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:11");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2015/10/01");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/12/22");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/12/29");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED11|SLES11)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED11 / SLES11", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    if (cpu >!< "i386|i486|i586|i686|x86_64") audit(AUDIT_ARCH_NOT, "i386 / i486 / i586 / i686 / x86_64", cpu);
    
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES11" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLES11 SP4", os_ver + " SP" + sp);
    if (os_ver == "SLED11" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLED11 SP4", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-kmp-default-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-libs-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-tools-domU-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-doc-html-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-libs-32bit-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-tools-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"x86_64", reference:"xen-kmp-pae-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-kmp-default-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-libs-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-tools-domU-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"4", cpu:"i586", reference:"xen-kmp-pae-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-kmp-default-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-libs-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-tools-domU-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-doc-html-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-libs-32bit-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-tools-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"x86_64", reference:"xen-kmp-pae-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-kmp-default-4.4.3_06_3.0.101_65-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-libs-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-tools-domU-4.4.3_06-29.1")) flag++;
    if (rpm_check(release:"SLED11", sp:"4", cpu:"i586", reference:"xen-kmp-pae-4.4.3_06_3.0.101_65-29.1")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen");
    }
    
  • NASL familyFedora Local Security Checks
    NASL idFEDORA_2015-A931B02BE2.NASL
    descriptionnine security updates CVE-2015-7969 CVE-2015-7970 CVE-2015-7813 CVE-2015-7814 CVE-2015-7812 CVE-2015-7971 CVE-2015-7835 CVE-2015-7972 Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-05
    modified2016-03-04
    plugin id89359
    published2016-03-04
    reporterThis script is Copyright (C) 2016-2020 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/89359
    titleFedora 23 : xen-4.5.1-14.fc23 (2015-a931b02be2)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were  
    # extracted from Fedora Security Advisory 2015-a931b02be2.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(89359);
      script_version("1.2");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2015-7812", "CVE-2015-7813", "CVE-2015-7814", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7970", "CVE-2015-7971", "CVE-2015-7972");
      script_xref(name:"FEDORA", value:"2015-a931b02be2");
    
      script_name(english:"Fedora 23 : xen-4.5.1-14.fc23 (2015-a931b02be2)");
      script_summary(english:"Checks rpm output for the updated package.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote Fedora host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "nine security updates CVE-2015-7969 CVE-2015-7970 CVE-2015-7813
    CVE-2015-7814 CVE-2015-7812 CVE-2015-7971 CVE-2015-7835 CVE-2015-7972
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the Fedora security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271621"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271626"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271630"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271971"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1272519"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1272525"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1272529"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1276120"
      );
      # https://lists.fedoraproject.org/pipermail/package-announce/2015-November/171082.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?9ede0e37"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected xen package.");
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:C/I:C/A:C");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:fedoraproject:fedora:xen");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:fedoraproject:fedora:23");
    
      script_set_attribute(attribute:"patch_publication_date", value:"2015/11/08");
      script_set_attribute(attribute:"plugin_publication_date", value:"2016/03/04");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2016-2020 Tenable Network Security, Inc.");
      script_family(english:"Fedora Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/RedHat/release");
    if (isnull(release) || "Fedora" >!< release) audit(AUDIT_OS_NOT, "Fedora");
    os_ver = eregmatch(pattern: "Fedora.*release ([0-9]+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Fedora");
    os_ver = os_ver[1];
    if (! ereg(pattern:"^23([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Fedora 23.x", "Fedora " + os_ver);
    
    if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Fedora", cpu);
    
    flag = 0;
    if (rpm_check(release:"FC23", reference:"xen-4.5.1-14.fc23")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen");
    }
    
  • NASL familyFedora Local Security Checks
    NASL idFEDORA_2015-6F6B79EFE2.NASL
    descriptionnine security updates CVE-2015-7969 CVE-2015-7970 CVE-2015-7813 CVE-2015-7814 CVE-2015-7812 CVE-2015-7971 CVE-2015-7835 CVE-2015-7972 Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-05
    modified2016-03-04
    plugin id89278
    published2016-03-04
    reporterThis script is Copyright (C) 2016-2020 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/89278
    titleFedora 22 : xen-4.5.1-14.fc22 (2015-6f6b79efe2)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were  
    # extracted from Fedora Security Advisory 2015-6f6b79efe2.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(89278);
      script_version("2.2");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2015-7812", "CVE-2015-7813", "CVE-2015-7814", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7970", "CVE-2015-7971", "CVE-2015-7972");
      script_xref(name:"FEDORA", value:"2015-6f6b79efe2");
    
      script_name(english:"Fedora 22 : xen-4.5.1-14.fc22 (2015-6f6b79efe2)");
      script_summary(english:"Checks rpm output for the updated package.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote Fedora host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "nine security updates CVE-2015-7969 CVE-2015-7970 CVE-2015-7813
    CVE-2015-7814 CVE-2015-7812 CVE-2015-7971 CVE-2015-7835 CVE-2015-7972
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the Fedora security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271621"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271626"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271630"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1271971"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1272519"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1272525"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1272529"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.redhat.com/show_bug.cgi?id=1276120"
      );
      # https://lists.fedoraproject.org/pipermail/package-announce/2015-November/171185.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?27f30290"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected xen package.");
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:C/I:C/A:C");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:fedoraproject:fedora:xen");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:fedoraproject:fedora:22");
    
      script_set_attribute(attribute:"patch_publication_date", value:"2015/11/09");
      script_set_attribute(attribute:"plugin_publication_date", value:"2016/03/04");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2016-2020 Tenable Network Security, Inc.");
      script_family(english:"Fedora Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/RedHat/release");
    if (isnull(release) || "Fedora" >!< release) audit(AUDIT_OS_NOT, "Fedora");
    os_ver = eregmatch(pattern: "Fedora.*release ([0-9]+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Fedora");
    os_ver = os_ver[1];
    if (! ereg(pattern:"^22([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Fedora 22.x", "Fedora " + os_ver);
    
    if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Fedora", cpu);
    
    flag = 0;
    if (rpm_check(release:"FC22", reference:"xen-4.5.1-14.fc22")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen");
    }
    
  • NASL familyOracleVM Local Security Checks
    NASL idORACLEVM_OVMSA-2015-0141.NASL
    descriptionThe remote OracleVM system is missing necessary patches to address critical security updates : - x86: rate-limit logging in do_xen[oprof,pmu]_op Some of the sub-ops are acessible to all guests, and hence should be rate-limited. In the xenoprof case, just like for XSA-146, include them only in debug builds. Since the vPMU code is rather new, allow them to be always present, but downgrade them to (rate limited) guest messages. This is XSA-152. (CVE-2015-7971) - xenoprof: free domain
    last seen2020-06-01
    modified2020-06-02
    plugin id86669
    published2015-10-30
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86669
    titleOracleVM 3.3 : xen (OVMSA-2015-0141)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The package checks in this plugin were extracted from OracleVM
    # Security Advisory OVMSA-2015-0141.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(86669);
      script_version("2.6");
      script_cvs_date("Date: 2019/09/27 13:00:34");
    
      script_cve_id("CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971");
    
      script_name(english:"OracleVM 3.3 : xen (OVMSA-2015-0141)");
      script_summary(english:"Checks the RPM output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote OracleVM host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "The remote OracleVM system is missing necessary patches to address
    critical security updates :
    
      - x86: rate-limit logging in do_xen[oprof,pmu]_op Some of
        the sub-ops are acessible to all guests, and hence
        should be rate-limited. In the xenoprof case, just like
        for XSA-146, include them only in debug builds. Since
        the vPMU code is rather new, allow them to be always
        present, but downgrade them to (rate limited) guest
        messages. This is XSA-152. (CVE-2015-7971)
    
      - xenoprof: free domain's vcpu array This was overlooked
        in fb442e2171 ('x86_64: allow more vCPU-s per guest').
        This is XSA-151. (CVE-2015-7969)
    
      - x86: guard against undue super page PTE creation When
        optional super page support got added (commit bd1cd81d64
        'x86: PV support for hugepages'), two adjustments were
        missed: mod_l2_entry needs to consider the PSE and RW
        bits when deciding whether to use the fast path, and the
        PSE bit must not be removed from L2_DISALLOW_MASK
        unconditionally. This is XSA-148. (CVE-2015-7835)"
      );
      # https://oss.oracle.com/pipermail/oraclevm-errata/2015-October/000374.html
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?2dce5d78"
      );
      script_set_attribute(
        attribute:"solution", 
        value:"Update the affected xen / xen-tools packages."
      );
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:C/I:C/A:C");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"false");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:vm:xen-tools");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:vm_server:3.3");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2015/10/30");
      script_set_attribute(attribute:"patch_publication_date", value:"2015/10/29");
      script_set_attribute(attribute:"plugin_publication_date", value:"2015/10/30");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"OracleVM Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/OracleVM/release", "Host/OracleVM/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/OracleVM/release");
    if (isnull(release) || "OVS" >!< release) audit(AUDIT_OS_NOT, "OracleVM");
    if (! preg(pattern:"^OVS" + "3\.3" + "(\.[0-9]|$)", string:release)) audit(AUDIT_OS_NOT, "OracleVM 3.3", "OracleVM " + release);
    if (!get_kb_item("Host/OracleVM/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "OracleVM", cpu);
    if ("x86_64" >!< cpu) audit(AUDIT_ARCH_NOT, "x86_64", cpu);
    
    flag = 0;
    if (rpm_check(release:"OVS3.3", reference:"xen-4.3.0-55.el6.47.58")) flag++;
    if (rpm_check(release:"OVS3.3", reference:"xen-tools-4.3.0-55.el6.47.58")) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen / xen-tools");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-1853-1.NASL
    descriptionxen was updated to fix nine security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl in Xen did not properly handle the readonly flag on disks when using the qemu-xen device model, which allowed local guest users to write to a read-only disk image (bsc#947165). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id86704
    published2015-11-03
    reporterThis script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86704
    titleSUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:1853-1)
  • NASL familyFreeBSD Local Security Checks
    NASL idFREEBSD_PKG_E3792855881F11E5AB94002590263BF5.NASL
    descriptionThe Xen Project reports : A domain
    last seen2020-06-01
    modified2020-06-02
    plugin id86840
    published2015-11-11
    reporterThis script is Copyright (C) 2015-2018 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86840
    titleFreeBSD : xen-kernel -- leak of per-domain profiling-related vcpu pointer array (e3792855-881f-11e5-ab94-002590263bf5)
  • NASL familyGentoo Local Security Checks
    NASL idGENTOO_GLSA-201604-03.NASL
    descriptionThe remote host is affected by the vulnerability described in GLSA-201604-03 (Xen: Multiple vulnerabilities) Multiple vulnerabilities have been discovered in Xen. Please review the CVE identifiers referenced below for details. Impact : A local attacker could possibly cause a Denial of Service condition or obtain sensitive information. Workaround : There is no known workaround at this time.
    last seen2020-06-01
    modified2020-06-02
    plugin id90380
    published2016-04-07
    reporterThis script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/90380
    titleGLSA-201604-03 : Xen: Multiple vulnerabilities (Venom)
  • NASL familyOracleVM Local Security Checks
    NASL idORACLEVM_OVMSA-2018-0248.NASL
    descriptionThe remote OracleVM system is missing necessary patches to address critical security updates : please see Oracle VM Security Advisory OVMSA-2018-0248 for details.
    last seen2020-06-01
    modified2020-06-02
    plugin id111992
    published2018-08-20
    reporterThis script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/111992
    titleOracleVM 3.4 : xen (OVMSA-2018-0248) (Bunker Buster) (Foreshadow) (Meltdown) (POODLE) (Spectre)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-2306-1.NASL
    descriptionThis update fixes the following security issues : - bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list - bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159) xsa159.patch - bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162) - bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception - bsc#953527 - CVE-2015-5307: kernel: kvm/xen: x86: avoid guest->host DOS by intercepting #AC (XSA-156) - bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) - bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153) - bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149) - bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151) - bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id87528
    published2015-12-21
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/87528
    titleSUSE SLES11 Security Update : xen (SUSE-SU-2015:2306-1)
  • NASL familyFedora Local Security Checks
    NASL idFEDORA_2015-242BE2C240.NASL
    descriptionnine security updates CVE-2015-7969 CVE-2015-7970 CVE-2015-7813 CVE-2015-7814 CVE-2015-7812 CVE-2015-7971 CVE-2015-7835 CVE-2015-7972 Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-05
    modified2016-03-04
    plugin id89177
    published2016-03-04
    reporterThis script is Copyright (C) 2016-2020 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/89177
    titleFedora 21 : xen-4.4.3-7.fc21 (2015-242be2c240)
  • NASL familyOracleVM Local Security Checks
    NASL idORACLEVM_OVMSA-2015-0142.NASL
    descriptionThe remote OracleVM system is missing necessary patches to address critical security updates : please see Oracle VM Security Advisory OVMSA-2015-0142 for details.
    last seen2020-06-01
    modified2020-06-02
    plugin id86670
    published2015-10-30
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86670
    titleOracleVM 3.2 : xen (OVMSA-2015-0142)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-1908-1.NASL
    descriptionxen was updated to version 4.4.3 to fix nine security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl in Xen did not properly handle the readonly flag on disks when using the qemu-xen device model, which allowed local guest users to write to a read-only disk image (bsc#947165). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id86756
    published2015-11-05
    reporterThis script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86756
    titleSUSE SLED12 / SLES12 Security Update : xen (SUSE-SU-2015:1908-1)
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2015-730.NASL
    descriptionXen was updated to fix 6 security issues. These security issues were fixed : - CVE-2014-0222: Validate L2 table size to avoid integer overflows (bsc#877642). - CVE-2015-4037: Insecure temporary file use in /net/slirp.c (bsc#932267). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7969: Leak of per-domain profiling-related vcpu pointer array (DoS) (bsc#950705 bsc#950703). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). - CVE-2015-7972: Populate-on-demand balloon size inaccuracy can crash guests (bsc#951845).
    last seen2020-06-05
    modified2015-11-20
    plugin id86961
    published2015-11-20
    reporterThis script is Copyright (C) 2015-2020 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/86961
    titleopenSUSE Security Update : xen (openSUSE-2015-730)
  • NASL familyDebian Local Security Checks
    NASL idDEBIAN_DLA-479.NASL
    descriptionThis security update fixes a number of security issues in Xen in wheezy. For Debian 7
    last seen2020-03-17
    modified2016-05-18
    plugin id91198
    published2016-05-18
    reporterThis script is Copyright (C) 2016-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/91198
    titleDebian DLA-479-1 : xen security update
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2015-729.NASL
    descriptionxen was updated to fix 13 security issues. These security issues were fixed : - CVE-2015-7972: Populate-on-demand balloon size inaccuracy can crash guests (bsc#951845). - CVE-2015-7969: Leak of main per-domain vcpu pointer array (DoS) (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling-related vcpu pointer array (DoS) (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). - CVE-2015-4037: Insecure temporary file use in /net/slirp.c (bsc#932267). - CVE-2014-0222: Validate L2 table size to avoid integer overflows (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl fails to honour readonly flag on disks with qemu-xen (bsc#947165). - CVE-2015-5165: QEMU leak of uninitialized heap memory in rtl8139 device model (bsc#939712). - CVE-2015-5166: Use after free in QEMU/Xen block unplug protocol (bsc#939709). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: e1000: infinite loop issue (bsc#944697). - CVE-2015-5154: Host code execution via IDE subsystem CD-ROM (bsc#938344). This non-security issues was fixed : - bsc#941074: VmError: Device 51728 (vbd) could not be connected. Hotplug scripts not working.
    last seen2020-06-05
    modified2015-11-13
    plugin id86863
    published2015-11-13
    reporterThis script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/86863
    titleopenSUSE Security Update : xen (openSUSE-2015-729)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-2326-1.NASL
    descriptionThis update fixes the following security issues : - bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list - bsc#956592 - xen: virtual PMU is unsupported (XSA-163) - bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159) - bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160) - bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162) - bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142) - bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception - bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156) - bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) - bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153) - bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149) - bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151) - bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id87590
    published2015-12-22
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/87590
    titleSUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:2326-1)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2015-2328-1.NASL
    descriptionThis update fixes the following security issues : - bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list - bsc#956592 - xen: virtual PMU is unsupported (XSA-163) - bsc#956408 - CVE-2015-8339, CVE-2015-8340: xen: XENMEM_exchange error handling issues (XSA-159) - bsc#956409 - CVE-2015-8341: xen: libxl leak of pv kernel and initrd on error (XSA-160) - bsc#956411 - CVE-2015-7504: xen: heap buffer overflow vulnerability in pcnet emulator (XSA-162) - bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142) - bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception - bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156) CVE-2015-5307-xsa156.patch - bsc#950704 - CVE-2015-7970: xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) 563212c9-x86-PoD-Eager-sweep-for-zeroed-pages.patch - bsc#951845 - CVE-2015-7972: xen: x86: populate-on-demand balloon size inaccuracy can crash guests (XSA-153) xsa153-libxl.patch xend-xsa153.patch - Drop 5604f239-x86-PV-properly-populate-descriptor-tables.patc h - bsc#950703 - CVE-2015-7969: xen: leak of main per-domain vcpu pointer array (DoS) (XSA-149) - bsc#950705 - CVE-2015-7969: xen: x86: leak of per-domain profiling-related vcpu pointer array (DoS) (XSA-151) - bsc#950706 - CVE-2015-7971: xen: x86: some pmu and profiling hypercalls log without rate limiting (XSA-152) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id87591
    published2015-12-22
    reporterThis script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/87591
    titleSUSE SLED12 / SLES12 Security Update : xen (SUSE-SU-2015:2328-1)