Vulnerabilities > Linux > Linux Kernel > Medium
| DATE | CVE | VULNERABILITY TITLE | RISK |
|---|---|---|---|
| 2024-07-17 | CVE-2024-41009 | Allocation of Resources Without Limits or Throttling vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. | 5.5 |
| 2024-07-17 | CVE-2024-41010 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. | 5.5 |
| 2024-07-16 | CVE-2022-48835 | Release of Invalid Pointer or Reference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Page fault in reply q processing A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - not-present page [ 149.903123] PGD 0 P4D 0 [ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1 [ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021 [ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas] [ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee [ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246 [ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071 [ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8 [ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff [ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000 [ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80 [ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000 [ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0 [ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 150.108323] PKRU: 55555554 [ 150.114690] Call Trace: [ 150.120497] ? printk+0x48/0x4a [ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas] [ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas] [ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas] [ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod] [ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod] [ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60 [ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod] [ 150.203206] ? __schedule+0x1e9/0x610 [ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod] [ 150.217924] kthread+0x12e/0x150 [ 150.224041] ? kthread_worker_fn+0x130/0x130 [ 150.231206] ret_from_fork+0x1f/0x30 This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q pointer outside of the list_for_each_entry() loop. | 5.5 |
| 2024-07-16 | CVE-2022-48836 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: Input: aiptek - properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. | 5.5 |
| 2024-07-16 | CVE-2022-48838 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: usb: gadget: Fix use-after-free bug by not setting udc->dev.driver The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. | 5.5 |
| 2024-07-16 | CVE-2022-48839 | Out-of-bounds Read vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: net/packet: fix slab-out-of-bounds access in packet_recvmsg() syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH and mmap operations, tpacket_rcv() is queueing skbs with garbage in skb->cb[], triggering a too big copy [1] Presumably, users of af_packet using mmap() already gets correct metadata from the mapped buffer, we can simply make sure to clear 12 bytes that might be copied to user space later. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631 CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 memcpy+0x39/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:225 [inline] packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fdfd5954c29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60 R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54 </TASK> addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame: ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246 this frame has 1 object: [32, 160) 'addr' Memory state around the buggy address: ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 >ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 ^ ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00 ================================================================== | 5.5 |
| 2024-07-16 | CVE-2022-48840 | Infinite Loop vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: iavf: Fix hang during reboot/shutdown Recent commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") adds a wait-loop at the beginning of iavf_remove() to ensure that port initialization is finished prior unregistering net device. | 5.5 |
| 2024-07-16 | CVE-2022-48841 | NULL Pointer Dereference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() It is possible to do NULL pointer dereference in routine that updates Tx ring stats. | 5.5 |
| 2024-07-16 | CVE-2022-48842 | Improper Locking vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: ice: Fix race condition during interface enslave Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. | 4.7 |
| 2024-07-16 | CVE-2022-48843 | NULL Pointer Dereference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: drm/vrr: Set VRR capable prop only if it is attached to connector VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference. | 5.5 |