Vulnerabilities > Linux > Linux Kernel > 5.4.289
| DATE | CVE | VULNERABILITY TITLE | RISK |
|---|---|---|---|
| 2025-01-15 | CVE-2024-57892 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv When mounting ocfs2 and then remounting it as read-only, a slab-use-after-free occurs after the user uses a syscall to quota_getnextquota. | 7.8 |
| 2025-01-15 | CVE-2024-57896 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount During the unmount path, at close_ctree(), we first stop the cleaner kthread, using kthread_stop() which frees the associated task_struct, and then stop and destroy all the work queues. | 7.8 |
| 2025-01-08 | CVE-2024-56786 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: bpf: put bpf_link's program when link is safe to be deallocated In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it. As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. | 5.5 |
| 2025-01-06 | CVE-2024-56759 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when COWing tree bock and tracing is enabled When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. | 7.8 |
| 2024-12-29 | CVE-2024-56712 | Memory Leak vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix memory leak on last export_udmabuf() error path In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a dma_buf owning the udmabuf has already been created; but the error handling in udmabuf_create() will tear down the udmabuf without doing anything about the containing dma_buf. This leaves a dma_buf in memory that contains a dangling pointer; though that doesn't seem to lead to anything bad except a memory leak. Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we can give it different error handling. Note that the shape of this code changed a lot in commit 5e72b2b41a21 ("udmabuf: convert udmabuf driver to use folios"); but the memory leak seems to have existed since the introduction of udmabuf. | 5.5 |
| 2024-12-27 | CVE-2024-56551 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix usage slab after free [ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147 [ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1 [ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000016] Call Trace: [ +0.000008] <TASK> [ +0.000009] dump_stack_lvl+0x76/0xa0 [ +0.000017] print_report+0xce/0x5f0 [ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000019] ? srso_return_thunk+0x5/0x5f [ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200 [ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000019] kasan_report+0xbe/0x110 [ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000023] __asan_report_load8_noabort+0x14/0x30 [ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_write+0x14/0x30 [ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched] [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_write+0x14/0x30 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? enable_work+0x124/0x220 [ +0.000015] ? __pfx_enable_work+0x10/0x10 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? free_large_kmalloc+0x85/0xf0 [ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched] [ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu] [ +0.000735] ? __kasan_check_read+0x11/0x20 [ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu] [ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu] [ +0.000679] ? mutex_unlock+0x80/0xe0 [ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu] [ +0.000662] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_check_write+0x14/0x30 [ +0.000013] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? mutex_unlock+0x80/0xe0 [ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu] [ +0.000663] drm_minor_release+0xc9/0x140 [drm] [ +0.000081] drm_release+0x1fd/0x390 [drm] [ +0.000082] __fput+0x36c/0xad0 [ +0.000018] __fput_sync+0x3c/0x50 [ +0.000014] __x64_sys_close+0x7d/0xe0 [ +0.000014] x64_sys_call+0x1bc6/0x2680 [ +0.000014] do_syscall_64+0x70/0x130 [ +0.000014] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? irqentry_exit+0x43/0x50 [ +0.000012] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? exc_page_fault+0x7c/0x110 [ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000014] RIP: 0033:0x7ffff7b14f67 [ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff [ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67 [ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003 [ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000 [ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8 [ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040 [ +0.000020] </TASK> [ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s: [ +0.000014] kasan_save_stack+0x28/0x60 [ +0.000008] kasan_save_track+0x18/0x70 [ +0.000007] kasan_save_alloc_info+0x38/0x60 [ +0.000007] __kasan_kmalloc+0xc1/0xd0 [ +0.000007] kmalloc_trace_noprof+0x180/0x380 [ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched] [ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu] [ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu] [ +0.000662] amdgpu_pci_p ---truncated--- | 7.8 |
| 2024-12-27 | CVE-2024-56604 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc(). | 7.8 |
| 2024-12-27 | CVE-2024-56623 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. | 5.5 |
| 2024-12-27 | CVE-2024-56631 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. | 7.8 |
| 2024-12-27 | CVE-2024-56640 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: net/smc: fix LGR and link use-after-free issue We encountered a LGR/link use-after-free issue, which manifested as the LGR/link refcnt reaching 0 early and entering the clear process, making resource access unsafe. refcount_t: addition on 0; use-after-free. WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140 Workqueue: events smc_lgr_terminate_work [smc] Call trace: refcount_warn_saturate+0x9c/0x140 __smc_lgr_terminate.part.45+0x2a8/0x370 [smc] smc_lgr_terminate_work+0x28/0x30 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 or refcount_t: underflow; use-after-free. WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140 Workqueue: smc_hs_wq smc_listen_work [smc] Call trace: refcount_warn_saturate+0xf0/0x140 smcr_link_put+0x1cc/0x1d8 [smc] smc_conn_free+0x110/0x1b0 [smc] smc_conn_abort+0x50/0x60 [smc] smc_listen_find_device+0x75c/0x790 [smc] smc_listen_work+0x368/0x8a0 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118 It is caused by repeated release of LGR/link refcnt. | 7.8 |