Vulnerabilities > Linux > Linux Kernel > 5.4.267
| DATE | CVE | VULNERABILITY TITLE | RISK |
|---|---|---|---|
| 2024-10-21 | CVE-2022-48952 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: PCI: mt7621: Add sentinel to quirks table Current driver is missing a sentinel in the struct soc_device_attribute array, which causes an oops when assessed by the soc_device_match(mt7621_pcie_quirks_match) call. This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr was fixed to register the SOC as a device, in: commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early") Fix it by adding the required sentinel. | 5.5 |
| 2024-10-21 | CVE-2022-48953 | NULL Pointer Dereference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit. | 5.5 |
| 2024-10-21 | CVE-2022-48961 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: net: mdio: fix unbalanced fwnode reference count in mdio_device_release() There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced. | 5.5 |
| 2024-10-21 | CVE-2022-48975 | Memory Leak vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiochip_setup_dev() Here is a backtrace report about memory leak detected in gpiochip_setup_dev(): unreferenced object 0xffff88810b406400 (size 512): comm "python3", pid 1682, jiffies 4295346908 (age 24.090s) backtrace: kmalloc_trace device_add device_private_init at drivers/base/core.c:3361 (inlined by) device_add at drivers/base/core.c:3411 cdev_device_add gpiolib_cdev_register gpiochip_setup_dev gpiochip_add_data_with_key gcdev_register() & gcdev_unregister() would call device_add() & device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to register/unregister device. However, if device_add() succeeds, some resource (like struct device_private allocated by device_private_init()) is not released by device_del(). Therefore, after device_add() succeeds by gcdev_register(), it needs to call put_device() to release resource in the error handle path. Here we move forward the register of release function, and let it release every piece of resource by put_device() instead of kfree(). While at it, fix another subtle issue, i.e. | 5.5 |
| 2024-10-21 | CVE-2022-48979 | Improper Validation of Array Index vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. | 5.5 |
| 2024-10-21 | CVE-2022-48982 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix crash when replugging CSR fake controllers It seems fake CSR 5.0 clones can cause the suspend notifier to be registered twice causing the following kernel panic: [ 71.986122] Call Trace: [ 71.986124] <TASK> [ 71.986125] blocking_notifier_chain_register+0x33/0x60 [ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da] [ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477] [ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300 [ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90 [ 71.986167] usb_probe_interface+0xe3/0x2b0 [ 71.986171] really_probe+0xdb/0x380 [ 71.986174] ? pm_runtime_barrier+0x54/0x90 [ 71.986177] __driver_probe_device+0x78/0x170 [ 71.986180] driver_probe_device+0x1f/0x90 [ 71.986183] __device_attach_driver+0x89/0x110 [ 71.986186] ? driver_allows_async_probing+0x70/0x70 [ 71.986189] bus_for_each_drv+0x8c/0xe0 [ 71.986192] __device_attach+0xb2/0x1e0 [ 71.986195] bus_probe_device+0x92/0xb0 [ 71.986198] device_add+0x422/0x9a0 [ 71.986201] ? sysfs_merge_group+0xd4/0x110 [ 71.986205] usb_set_configuration+0x57a/0x820 [ 71.986208] usb_generic_driver_probe+0x4f/0x70 [ 71.986211] usb_probe_device+0x3a/0x110 [ 71.986213] really_probe+0xdb/0x380 [ 71.986216] ? pm_runtime_barrier+0x54/0x90 [ 71.986219] __driver_probe_device+0x78/0x170 [ 71.986221] driver_probe_device+0x1f/0x90 [ 71.986224] __device_attach_driver+0x89/0x110 [ 71.986227] ? driver_allows_async_probing+0x70/0x70 [ 71.986230] bus_for_each_drv+0x8c/0xe0 [ 71.986232] __device_attach+0xb2/0x1e0 [ 71.986235] bus_probe_device+0x92/0xb0 [ 71.986237] device_add+0x422/0x9a0 [ 71.986239] ? _dev_info+0x7d/0x98 [ 71.986242] ? blake2s_update+0x4c/0xc0 [ 71.986246] usb_new_device.cold+0x148/0x36d [ 71.986250] hub_event+0xa8a/0x1910 [ 71.986255] process_one_work+0x1c4/0x380 [ 71.986259] worker_thread+0x51/0x390 [ 71.986262] ? rescuer_thread+0x3b0/0x3b0 [ 71.986264] kthread+0xdb/0x110 [ 71.986266] ? kthread_complete_and_exit+0x20/0x20 [ 71.986268] ret_from_fork+0x1f/0x30 [ 71.986273] </TASK> [ 71.986274] ---[ end trace 0000000000000000 ]--- [ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 | 5.5 |
| 2024-10-21 | CVE-2022-48990 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free during gpu recovery [Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free | 7.8 |
| 2024-10-21 | CVE-2022-49000 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix PCI device refcount leak in has_external_pci() for_each_pci_dev() is implemented by pci_get_device(). | 5.5 |
| 2024-10-21 | CVE-2022-49026 | Use After Free vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. | 7.8 |
| 2024-10-21 | CVE-2022-49027 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: iavf: Fix error handling in iavf_init_module() The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. | 5.5 |