Vulnerabilities > Linux > Linux Kernel > 2.5.40
| DATE | CVE | VULNERABILITY TITLE | RISK |
|---|---|---|---|
| 2024-04-10 | CVE-2021-47187 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency The entry/exit latency and minimum residency in state for the idle states of MSM8998 were ..bad: first of all, for all of them the timings were written for CPU sleep but the min-residency-us param was miscalculated (supposedly, while porting this from downstream); Then, the power collapse states are setting PC on both the CPU cluster *and* the L2 cache, which have different timings: in the specific case of L2 the times are higher so these ones should be taken into account instead of the CPU ones. This parameter misconfiguration was not giving particular issues because on MSM8998 there was no CPU scaling at all, so cluster/L2 power collapse was rarely (if ever) hit. When CPU scaling is enabled, though, the wrong timings will produce SoC unstability shown to the user as random, apparently error-less, sudden reboots and/or lockups. This set of parameters are stabilizing the SoC when CPU scaling is ON and when power collapse is frequently hit. | 5.5 |
| 2024-04-10 | CVE-2021-47191 | Out-of-bounds Read vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. | 7.1 |
| 2024-04-10 | CVE-2021-47193 | Memory Leak vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Fix memory leak during rmmod Driver failed to release all memory allocated. | 5.5 |
| 2024-04-10 | CVE-2021-47202 | NULL Pointer Dereference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: thermal: Fix NULL pointer dereferences in of_thermal_ functions of_parse_thermal_zones() parses the thermal-zones node and registers a thermal_zone device for each subnode. | 5.5 |
| 2024-04-10 | CVE-2021-47205 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: Unregister clocks/resets when unbinding Currently, unbinding a CCU driver unmaps the device's MMIO region, while leaving its clocks/resets and their providers registered. | 5.5 |
| 2024-04-10 | CVE-2021-47211 | NULL Pointer Dereference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix null pointer dereference on pointer cs_desc The pointer cs_desc return from snd_usb_find_clock_source could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference. | 5.5 |
| 2024-04-10 | CVE-2021-47219 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs() The following issue was observed running syzkaller: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815 CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe4/0x14a lib/dump_stack.c:118 print_address_description+0x73/0x280 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x272/0x370 mm/kasan/report.c:410 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:377 [inline] sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034 __blk_run_queue_uncond block/blk-core.c:464 [inline] __blk_run_queue+0x1a4/0x380 block/blk-core.c:484 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716 sg_write+0x64/0xa0 drivers/scsi/sg.c:622 __vfs_write+0xed/0x690 fs/read_write.c:485 kill_bdev:block_device:00000000e138492c vfs_write+0x184/0x4c0 fs/read_write.c:549 ksys_write+0x107/0x240 fs/read_write.c:599 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe We get 'alen' from command its type is int. | 7.1 |
| 2024-04-04 | CVE-2024-26791 | Out-of-bounds Read vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: btrfs: dev-replace: properly validate device names There's a syzbot report that device name buffers passed to device replace are not properly checked for string termination which could lead to a read out of bounds in getname_kernel(). Add a helper that validates both source and target device name buffers. For devid as the source initialize the buffer to empty string in case something tries to read it later. This was originally analyzed and fixed in a different way by Edward Adam Davis (see links). | 7.1 |
| 2024-04-03 | CVE-2023-52640 | Unspecified vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea. | 7.1 |
| 2024-04-03 | CVE-2023-52641 | NULL Pointer Dereference vulnerability in Linux Kernel In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame() It is preferable to exit through the out: label because internal debugging functions are located there. | 5.5 |