Vulnerabilities > CVE-2018-17958 - Integer Overflow or Wraparound vulnerability in multiple products

047910
CVSS 7.5 - HIGH
Attack vector
NETWORK
Attack complexity
LOW
Privileges required
NONE
Confidentiality impact
NONE
Integrity impact
NONE
Availability impact
HIGH
network
low complexity
qemu
canonical
debian
redhat
CWE-190
nessus

Summary

Qemu has a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used.

Vulnerable Configurations

Part Description Count
Application
Qemu
282
Application
Redhat
2
OS
Canonical
4
OS
Debian
2
OS
Redhat
1

Common Weakness Enumeration (CWE)

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Forced Integer Overflow
    This attack forces an integer variable to go out of range. The integer variable is often used as an offset such as size of memory allocation or similarly. The attacker would typically control the value of such variable and try to get it out of range. For instance the integer in question is incremented past the maximum possible value, it may wrap to become a very small, or negative number, therefore providing a very incorrect value which can lead to unexpected behavior. At worst the attacker can execute arbitrary code.

Nessus

  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-4129-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-03-28
    modified2018-12-18
    plugin id119741
    published2018-12-18
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119741
    titleSUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2018:4129-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:4129-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(119741);
      script_version("1.3");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/03/27");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-15746", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849");
    
      script_name(english:"SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2018:4129-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issues fixed :
    
    CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable
    to an integer overflow, which could lead to buffer overflow issue. It
    could occur when receiving packets over the network. A user inside
    guest could use this flaw to crash the Qemu process resulting in DoS
    (bsc#1110910).
    
    CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest
    users to cause a denial of service (guest crash) by leveraging
    mishandling of the seccomp policy for threads other than the main
    thread (bsc#1106222).
    
    CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in
    hw/net/rtl8139.c because an incorrect integer data type is used
    (bsc#1111006).
    
    CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in
    hw/net/pcnet.c because an incorrect integer data type is used
    (bsc#1111010).
    
    CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that
    accepts packet sizes greater than INT_MAX, which allows attackers to
    cause a denial of service or possibly have unspecified other impact.
    (bsc#1111013)
    
    CVE-2018-18849: Fixed an out of bounds memory access issue that was
    found in the LSI53C895A SCSI Host Bus Adapter emulation while writing
    a message in lsi_do_msgin. It could occur during migration if the
    'msg_len' field has an invalid value. A user/process could use this
    flaw to crash the Qemu process resulting in DoS (bsc#1114422).
    
    Non-security issues fixed: Improving disk performance for qemu on xen
    (bsc#1100408)
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1100408"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1106222"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1110910"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111006"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111010"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111013"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1114422"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-10839/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-15746/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17958/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17962/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17963/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-18849/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20184129-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?bc6d087f"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Server 12-SP3:zypper in -t patch
    SUSE-SLE-SERVER-12-SP3-2018-2944=1
    
    SUSE Linux Enterprise Desktop 12-SP3:zypper in -t patch
    SUSE-SLE-DESKTOP-12-SP3-2018-2944=1
    
    SUSE CaaS Platform ALL :
    
    To install this update, use the SUSE CaaS Platform Velum dashboard. It
    will inform you if it detects new updates and let you then trigger
    updating of the complete cluster in a controlled way.
    
    SUSE CaaS Platform 3.0 :
    
    To install this update, use the SUSE CaaS Platform Velum dashboard. It
    will inform you if it detects new updates and let you then trigger
    updating of the complete cluster in a controlled way."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/08/29");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/12/14");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/12/18");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES12" && (! preg(pattern:"^(3)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP3", os_ver + " SP" + sp);
    if (os_ver == "SLED12" && (! preg(pattern:"^(3)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP3", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-block-rbd-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-x86-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", cpu:"s390x", reference:"qemu-s390-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", cpu:"s390x", reference:"qemu-s390-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-curl-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-curl-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-iscsi-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-iscsi-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-ssh-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-ssh-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-debugsource-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-guest-agent-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-guest-agent-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-lang-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-tools-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-tools-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-kvm-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-block-curl-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-block-curl-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-debugsource-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-kvm-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-tools-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-tools-debuginfo-2.9.1-6.22.3")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-x86-2.9.1-6.22.3")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu");
    }
    
  • NASL familyHuawei Local Security Checks
    NASL idEULEROS_SA-2020-1430.NASL
    descriptionAccording to the versions of the qemu-kvm packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c misuses snprintf return values, leading to a buffer overflow in later code.(CVE-2020-8608) - This vulnerability has been modified since it was last analyzed by the NVD. It is awaiting reanalysis which may result in further changes to the information provided.(CVE-2019-11135) - tcp_emu in tcp_subr.c in libslirp 4.1.0, as used in QEMU 4.2.0, mismanages memory, as demonstrated by IRC DCC commands in EMU_IRC. This can cause a heap-based buffer overflow or other out-of-bounds access which can lead to a DoS or potential execute arbitrary code.(CVE-2020-7039) - ip_reass in ip_input.c in libslirp 4.0.0 has a heap-based buffer overflow via a large packet because it mishandles a case involving the first fragment.(CVE-2019-14378) - Integer overflow in the VNC display driver in QEMU before 2.1.0 allows attachers to cause a denial of service (process crash) via a CLIENT_CUT_TEXT message, which triggers an infinite loop.(CVE-2015-5239) - Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0 allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message.(CVE-2015-5745) - The ne2000_receive function in hw/net/ne2000.c in QEMU before 2.4.0.1 allows attackers to cause a denial of service (infinite loop and instance crash) or possibly execute arbitrary code via vectors related to receiving packets.(CVE-2015-5278) - The process_tx_desc function in hw/net/e1000.c in QEMU before 2.4.0.1 does not properly process transmit descriptor data when sending a network packet, which allows attackers to cause a denial of service (infinite loop and guest crash) via unspecified vectors.(CVE-2015-6815) - Heap-based buffer overflow in the ne2000_receive function in hw/net/ne2000.c in QEMU before 2.4.0.1 allows guest OS users to cause a denial of service (instance crash) or possibly execute arbitrary code via vectors related to receiving packets.(CVE-2015-5279) - Heap-based buffer overflow in the .receive callback of xlnx.xps-ethernetlite in QEMU (aka Quick Emulator) allows attackers to execute arbitrary code on the QEMU host via a large ethlite packet.(CVE-2016-7161) - hw/net/vmxnet3.c in QEMU 2.0.0-rc0, 1.7.1, and earlier allows local guest users to cause a denial of service or possibly execute arbitrary code via vectors related to (1) RX or (2) TX queue numbers or (3) interrupt indices. NOTE: some of these details are obtained from third party information.(CVE-2013-4544) - The slirp_smb function in net/slirp.c in QEMU 2.3.0 and earlier creates temporary files with predictable names, which allows local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program.(CVE-2015-4037) - hw/ide/core.c in QEMU does not properly restrict the commands accepted by an ATAPI device, which allows guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash.(CVE-2015-6855) - hw/virtio/virtio.c in the Virtual Network Device (virtio-net) support in QEMU, when big or mergeable receive buffers are not supported, allows remote attackers to cause a denial of service (guest network consumption) via a flood of jumbo frames on the (1) tuntap or (2) macvtap interface.(CVE-2015-7295) - The MSI-X MMIO support in hw/pci/msix.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) by leveraging failure to define the .write method.(CVE-2015-7549) - The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list.(CVE-2015-8345) - Qemu, when built with VNC display driver support, allows remote attackers to cause a denial of service (arithmetic exception and application crash) via crafted SetPixelFormat messages from a client.(CVE-2015-8504) - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD) list.(CVE-2015-8558) - Memory leak in net/vmxnet3.c in QEMU allows remote attackers to cause a denial of service (memory consumption).(CVE-2015-8567) - Memory leak in QEMU, when built with a VMWARE VMXNET3 paravirtual NIC emulator support, allows local guest users to cause a denial of service (host memory consumption) by trying to activate the vmxnet3 device repeatedly.(CVE-2015-8568) - Stack-based buffer overflow in the megasas_ctrl_get_info function in QEMU, when built with SCSI MegaRAID SAS HBA emulation support, allows local guest users to cause a denial of service (QEMU instance crash) via a crafted SCSI controller CTRL_GET_INFO command.(CVE-2015-8613) - Use-after-free vulnerability in hw/ide/ahci.c in QEMU, when built with IDE AHCI Emulation support, allows guest OS users to cause a denial of service (instance crash) or possibly execute arbitrary code via an invalid AHCI Native Command Queuing (NCQ) AIO command.(CVE-2016-1568) - QEMU (aka Quick Emulator) built with the USB EHCI emulation support is vulnerable to a null pointer dereference flaw. It could occur when an application attempts to write to EHCI capabilities registers. A privileged user inside quest could use this flaw to crash the QEMU process instance resulting in DoS.(CVE-2016-2198) - The ohci_bus_start function in the USB OHCI emulation support (hw/usb/hcd-ohci.c) in QEMU allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors related to multiple eof_timers.(CVE-2016-2391) - The is_rndis function in the USB Net device emulator (hw/usb/dev-network.c) in QEMU before 2.5.1 does not properly validate USB configuration descriptor objects, which allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving a remote NDIS control message packet.(CVE-2016-2392) - Multiple integer overflows in the USB Net device emulator (hw/usb/dev-network.c) in QEMU before 2.5.1 allow local guest OS administrators to cause a denial of service (QEMU process crash) or obtain sensitive host memory information via a remote NDIS control message packet that is mishandled in the (1) rndis_query_response, (2) rndis_set_response, or (3) usb_net_handle_dataout function.(CVE-2016-2538) - The ne2000_receive function in the NE2000 NIC emulation support (hw/net/ne2000.c) in QEMU before 2.5.1 allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via crafted values for the PSTART and PSTOP registers, involving ring buffer control.(CVE-2016-2841) - QEMU, when built with the Pseudo Random Number Generator (PRNG) back-end support, allows local guest OS users to cause a denial of service (process crash) via an entropy request, which triggers arbitrary stack based allocation and memory corruption.(CVE-2016-2858) - Buffer overflow in the stellaris_enet_receive function in hw/net/stellaris_enet.c in QEMU, when the Stellaris ethernet controller is configured to accept large packets, allows remote attackers to cause a denial of service (QEMU crash) via a large packet.(CVE-2016-4001) - Buffer overflow in the mipsnet_receive function in hw/net/mipsnet.c in QEMU, when the guest NIC is configured to accept large packets, allows remote attackers to cause a denial of service (memory corruption and QEMU crash) or possibly execute arbitrary code via a packet larger than 1514 bytes.(CVE-2016-4002) - The ehci_advance_state function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via a circular split isochronous transfer descriptor (siTD) list, a related issue to CVE-2015-8558.(CVE-2016-4037) - The vmsvga_fifo_run function in hw/display/vmware_vga.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a VGA command.(CVE-2016-4453) - The vmsvga_fifo_read_raw function in hw/display/vmware_vga.c in QEMU allows local guest OS administrators to obtain sensitive host memory information or cause a denial of service (QEMU process crash) by changing FIFO registers and issuing a VGA command, which triggers an out-of-bounds read.(CVE-2016-4454) - The net_tx_pkt_do_sw_fragmentation function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a zero length for the current fragment length.(CVE-2016-6834) - The vmxnet_tx_pkt_parse_headers function in hw/net/vmxnet_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (buffer over-read) by leveraging failure to check IP header length.(CVE-2016-6835) - The vmxnet3_complete_packet function in hw/net/vmxnet3.c in QEMU (aka Quick Emulator) allows local guest OS administrators to obtain sensitive host memory information by leveraging failure to initialize the txcq_descr object.(CVE-2016-6836) - Integer overflow in the net_tx_pkt_init function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (QEMU process crash) via the maximum fragmentation count, which triggers an unchecked multiplication and NULL pointer dereference.(CVE-2016-6888) - Directory traversal vulnerability in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to access host files outside the export path via a .. (dot dot) in an unspecified string.(CVE-2016-7116) - The pvscsi_ring_pop_req_descr function in hw/scsi/vmw_pvscsi.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by leveraging failure to limit process IO loop to the ring size.(CVE-2016-7421) - The mcf_fec_do_tx function in hw/net/mcf_fec.c in QEMU (aka Quick Emulator) does not properly limit the buffer descriptor count when transmitting packets, which allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via vectors involving a buffer descriptor with a length of 0 and crafted values in bd.flags.(CVE-2016-7908) - The pcnet_rdra_addr function in hw/net/pcnet.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by setting the (1) receive or (2) transmit descriptor ring length to 0.(CVE-2016-7909) - The xhci_ring_fetch function in hw/usb/hcd-xhci.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by leveraging failure to limit the number of link Transfer Request Blocks (TRB) to process.(CVE-2016-8576) - The serial_update_parameters function in hw/char/serial.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (divide-by-zero error and QEMU process crash) via vectors involving a value of divider greater than baud base.(CVE-2016-8669) - The intel_hda_xfer function in hw/audio/intel-hda.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via an entry with the same value for buffer length and pointer position.(CVE-2016-8909) - The rtl8139_cplus_transmit function in hw/net/rtl8139.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) by leveraging failure to limit the ring descriptor count.(CVE-2016-8910) - Memory leak in the v9fs_xattrcreate function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) via a large number of Txattrcreate messages with the same fid number.(CVE-2016-9102) - The v9fs_xattrcreate function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to obtain sensitive host heap memory information by reading xattribute values before writing to them.(CVE-2016-9103) - Multiple integer overflows in the (1) v9fs_xattr_read and (2) v9fs_xattr_write functions in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local guest OS administrators to cause a denial of service (QEMU process crash) via a crafted offset, which triggers an out-of-bounds access.(CVE-2016-9104) - Memory leak in the v9fs_link function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption) via vectors involving a reference to the source fid object.(CVE-2016-9105) - Memory leak in the v9fs_write function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption) by leveraging failure to free an IO vector.(CVE-2016-9106) - Race condition in QEMU in Xen allows local x86 HVM guest OS administrators to gain privileges by changing certain data on shared rings, aka a
    last seen2020-05-06
    modified2020-04-15
    plugin id135559
    published2020-04-15
    reporterThis script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/135559
    titleEulerOS 2.0 SP3 : qemu-kvm (EulerOS-SA-2020-1430)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-4237-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-03-26
    modified2018-12-24
    plugin id119872
    published2018-12-24
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119872
    titleSUSE SLES12 Security Update : qemu (SUSE-SU-2018:4237-1)
  • NASL familyDebian Local Security Checks
    NASL idDEBIAN_DSA-4454.NASL
    descriptionMultiple security issues were discovered in QEMU, a fast processor emulator, which could result in denial of service, the execution of arbitrary code or information disclosure. In addition this update backports support to passthrough the new md-clear CPU flag added in the intel-microcode update shipped in DSA 4447 to x86-based guests.
    last seen2020-06-01
    modified2020-06-02
    plugin id125609
    published2019-05-31
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/125609
    titleDebian DSA-4454-1 : qemu - security update
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-3927-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-03-18
    modified2019-01-02
    plugin id120171
    published2019-01-02
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/120171
    titleSUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2018:3927-1)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-4185-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-03-28
    modified2018-12-19
    plugin id119763
    published2018-12-19
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119763
    titleSUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2018:4185-1)
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2018-1483.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : - CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). - CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). - CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). - CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). - CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) - CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-05
    modified2018-12-07
    plugin id119491
    published2018-12-07
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119491
    titleopenSUSE Security Update : qemu (openSUSE-2018-1483)
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2018-1563.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : - CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). - CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). - CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). - CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) - CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-05
    modified2018-12-17
    plugin id119717
    published2018-12-17
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119717
    titleopenSUSE Security Update : qemu (openSUSE-2018-1563)
  • NASL familyUbuntu Local Security Checks
    NASL idUBUNTU_USN-3826-1.NASL
    descriptionDaniel Shapira and Arash Tohidi discovered that QEMU incorrectly handled NE2000 device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-10839) It was discovered that QEMU incorrectly handled the Slirp networking back-end. A privileged attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. This issue only affected Ubuntu 14.04 LTS, Ubuntu 16.04 LTS and Ubuntu 18.04 LTS. (CVE-2018-11806) Fakhri Zulkifli discovered that the QEMU guest agent incorrectly handled certain QMP commands. An attacker could possibly use this issue to crash the QEMU guest agent, resulting in a denial of service. (CVE-2018-12617) Li Qiang discovered that QEMU incorrectly handled NVM Express Controller emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-16847) Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly handled RTL8139 device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-17958) Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly handled PCNET device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-17962) Daniel Shapira discovered that QEMU incorrectly handled large packet sizes. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-17963) It was discovered that QEMU incorrectly handled LSI53C895A device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-18849) Moguofang discovered that QEMU incorrectly handled the IPowerNV LPC controller. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-18954) Zhibin Hu discovered that QEMU incorrectly handled the Plan 9 File System support. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-19364). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id119216
    published2018-11-27
    reporterUbuntu Security Notice (C) 2018-2019 Canonical, Inc. / NASL script (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119216
    titleUbuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 18.10 : qemu vulnerabilities (USN-3826-1)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-3975-1.NASL
    descriptionThis update for kvm fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-10
    modified2018-12-06
    plugin id119454
    published2018-12-06
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119454
    titleSUSE SLES11 Security Update : kvm (SUSE-SU-2018:3975-1)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-3912-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-01
    modified2020-06-02
    plugin id119215
    published2018-11-27
    reporterThis script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119215
    titleSUSE SLES12 Security Update : qemu (SUSE-SU-2018:3912-1)
  • NASL familyRed Hat Local Security Checks
    NASL idREDHAT-RHSA-2019-2553.NASL
    descriptionAn update for qemu-kvm-rhev is now available for Red Hat Virtualization 4 for Red Hat Enterprise Linux 7 and Red Hat Virtualization Engine 4.3. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on a variety of architectures. The qemu-kvm-rhev packages provide the user-space component for running virtual machines that use KVM in environments managed by Red Hat products. Security Fix(es) : * A flaw was found in the implementation of the
    last seen2020-06-01
    modified2020-06-02
    plugin id128205
    published2019-08-27
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/128205
    titleRHEL 7 : Virtualization Manager (RHSA-2019:2553) (MDSUM/RIDL) (MFBDS/RIDL/ZombieLoad) (MLPDS/RIDL) (MSBDS/Fallout)
  • NASL familyFedora Local Security Checks
    NASL idFEDORA_2018-87F2ACE20D.NASL
    description - Fix cpu model crash on AMD hosts (bz #1640140) - CVE-2018-15746: seccomp blacklist is not applied to all threads (bz #1618357) - Fix assertion in address_space_stw_le_cached (bz #1644728) - CVE-2018-10839: ne2000: fix possible out of bound access (bz #1636429) - CVE-2018-17958: rtl8139: fix possible out of bound access (bz #1636729) - CVE-2018-17962: pcnet: fix possible buffer overflow (bz #1636775) - CVE-2018-17963: net: ignore packet size greater than INT_MAX (bz #1636782) - CVE-2018-18849: lsi53c895a: OOB msg buffer access leads to DoS (bz #1644977) - CVE-2018-18954: ppc64: Out-of-bounds r/w stack access in pnv_lpc_do_eccb (bz #1645442) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-05
    modified2019-01-03
    plugin id120587
    published2019-01-03
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/120587
    titleFedora 29 : 2:qemu (2018-87f2ace20d)
  • NASL familyHuawei Local Security Checks
    NASL idEULEROS_SA-2019-2431.NASL
    descriptionAccording to the versions of the qemu-kvm packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - Race condition in QEMU in Xen allows local x86 HVM guest OS administrators to gain privileges by changing certain data on shared rings, aka a
    last seen2020-05-08
    modified2019-12-04
    plugin id131585
    published2019-12-04
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/131585
    titleEulerOS 2.0 SP2 : qemu-kvm (EulerOS-SA-2019-2431)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-3987-1.NASL
    descriptionThis update for kvm fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-10
    modified2018-12-06
    plugin id119456
    published2018-12-06
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119456
    titleSUSE SLES11 Security Update : kvm (SUSE-SU-2018:3987-1)
  • NASL familyDebian Local Security Checks
    NASL idDEBIAN_DLA-1646.NASL
    descriptionSeveral vulnerabilities were found in QEMU, a fast processor emulator : CVE-2018-17958 The rtl8139 emulator is affected by an integer overflow and subsequent buffer overflow. This vulnerability might be triggered by remote attackers with crafted packets to perform denial of service (via OOB stack buffer access). CVE-2018-19364 The 9pfs subsystem is affected by a race condition allowing threads to modify an fid path while it is being accessed by another thread, leading to (for example) a use-after-free outcome. This vulnerability might be triggered by local attackers to perform denial of service. CVE-2018-19489 The 9pfs subsystem is affected by a race condition during file renaming. This vulnerability might be triggered by local attackers to perform denial of service. For Debian 8
    last seen2020-03-17
    modified2019-01-30
    plugin id121436
    published2019-01-30
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/121436
    titleDebian DLA-1646-1 : qemu security update
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2019-0825-1.NASL
    descriptionThis update for xen fixes the following issues : Security issues fixed : CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-01
    modified2020-06-02
    plugin id123633
    published2019-04-02
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/123633
    titleSUSE SLES12 Security Update : xen (SUSE-SU-2019:0825-1)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-3973-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-10
    modified2018-12-06
    plugin id119453
    published2018-12-06
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119453
    titleSUSE SLES12 Security Update : qemu (SUSE-SU-2018:3973-1)
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2019-961.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : - CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). - CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). - CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). - CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). - CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) - CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-01
    modified2020-06-02
    plugin id123389
    published2019-03-27
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/123389
    titleopenSUSE Security Update : qemu (openSUSE-2019-961)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2019-0827-1.NASL
    descriptionThis update for xen fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow in tcp_emu() found in slirp (bsc#1123157). CVE-2017-13672: Fixed an out of bounds read access during display update (bsc#1056336). Fixed an issue which could allow malicious or buggy guests with passed through PCI devices to be able to escalate their privileges, crash the host, or access data belonging to other guests. Additionally memory leaks were also possible (bsc#1126140) Fixed a race condition issue which could allow malicious PV guests to escalate their privilege to that of the hypervisor (bsc#1126141). CVE-2018-18849: Fixed an out of bounds msg buffer access which could lead to denial of service (bsc#1114423). Fixed an issue which could allow a malicious unprivileged guest userspace process to escalate its privilege to that of other userspace processes in the same guest and potentially thereby to that of the guest operating system (bsc#1126201). CVE-2018-17958: Fixed an integer overflow leading to a buffer overflow in the rtl8139 component (bsc#1111007) CVE-2018-19967: Fixed HLE constructs that allowed guests to lock up the host, resulting in a Denial of Service (DoS). (XSA-282) (bsc#1114988) CVE-2018-19665: Fixed an integer overflow resulting in memory corruption in various Bluetooth functions, allowing this to crash qemu process resulting in Denial of Service (DoS). (bsc#1117756). CVE-2019-9824: Fixed an information leak in SLiRP networking implementation which could allow a user/process to read uninitialised stack memory contents (bsc#1129623). CVE-2018-19961, CVE-2018-19962: Fixed an issue related to insufficient TLB flushing with AMD IOMMUs, which potentially allowed a guest to escalate its privileges, may cause a Denial of Service (DoS) affecting the entire host, or may be able to access data it is not supposed to access. (XSA-275) (bsc#1115040) CVE-2018-19966: Fixed an issue related to a previous fix for XSA-240, which conflicted with shadow paging and allowed a guest to cause Xen to crash, resulting in a Denial of Service (DoS) (XSA-280) (bsc#1115047). CVE-2018-10839: Fixed an integer overflow leading to a buffer overflow in the ne2000 component (bsc#1110924). CVE-2018-19965: Fixed an issue related to the INVPCID instruction in case non-canonical addresses are accessed, which may allow a guest to cause Xen to crash, resulting in a Denial of Service (DoS) affecting the entire host. (XSA-279) (bsc#1115045). Fixed an issue which could allow malicious 64bit PV guests to cause a host crash (bsc#1127400). Fixed an issue which could allow malicious PV guests may cause a host crash or gain access to data pertaining to other guests.Additionally, vulnerable configurations are likely to be unstable even in the absence of an attack (bsc#1126198). Fixed multiple access violations introduced by XENMEM_exchange hypercall which could allow a single PV guest to leak arbitrary amounts of memory, leading to a denial of service (bsc#1126192). CVE-2018-17963: Fixed an integer overflow in relation to large packet sizes, leading to a denial of service (DoS). (bsc#1111014). Fixed an issue which could allow a malicious or buggy x86 PV guest kernels can mount a Denial of Service attack affecting the whole system (bsc#1126196). Fixed an issue which could allow an untrusted PV domain with access to a physical device to DMA into its own pagetables leading to privilege escalation (bsc#1126195). CVE-2018-17962: Fixed an integer overflow leading to a buffer overflow in the pcnet component (bsc#1111011) CVE-2018-18438: Fixed an integer overflow in ccid_card_vscard_read function which could lead to memory corruption (bsc#1112188). Other issues fixed: Upstream bug fixes (bsc#1027519) Fixed an issue where XEN SLE12-SP1 domU hangs on SLE12-SP3 HV1108940 (bsc#1108940). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id123634
    published2019-04-02
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/123634
    titleSUSE SLES12 Security Update : xen (SUSE-SU-2019:0827-1)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2019-13921-1.NASL
    descriptionThis update for xen fixes the following issues : Security vulnerabilities fixed : CVE-2018-19961, CVE-2018-19962: Fixed an issue related to insufficient TLB flushing with AMD IOMMUs, which potentially allowed a guest to escalate its privileges, may cause a Denial of Service (DoS) affecting the entire host, or may be able to access data it is not supposed to access. (XSA-275) (bsc#1115040) CVE-2018-19965: Fixed an issue related to the INVPCID instruction in case non-canonical addresses are accessed, which may allow a guest to cause Xen to crash, resulting in a Denial of Service (DoS) affecting the entire host. (XSA-279) (bsc#1115045) CVE-2018-19966: Fixed an issue related to a previous fix for XSA-240, which conflicted with shadow paging and allowed a guest to cause Xen to crash, resulting in a Denial of Service (DoS) (XSA-280) (bsc#1115047) CVE-2018-19967: Fixed HLE constructs that allowed guests to lock up the host, resulting in a Denial of Service (DoS). (XSA-282) (bsc#1114988) CVE-2018-19665: Fixed an integer overflow resulting in memory corruption in various Bluetooth functions, allowing this to crash qemu process resulting in Denial of Service (DoS). (bsc#1117756). CVE-2018-18849: Fixed an out of bounds memory access in the LSI53C895A SCSI host bus adapter emulation, which allowed a user and/or process to crash the qemu process resulting in a Denial of Service (DoS). (bsc#1114423) Fixed an integer overflow in ccid_card_vscard_read(), which allowed for memory corruption. (bsc#1112188) CVE-2017-13672: Fixed an out of bounds read access during display update (bsc#1056336) CVE-2018-17958: Fixed an integer overflow leading to a buffer overflow in the rtl8139 component (bsc#1111007) CVE-2018-17962: Fixed an integer overflow leading to a buffer overflow in the pcnet component (bsc#1111011) CVE-2018-17963: Fixed an integer overflow in relation to large packet sizes, leading to a denial of service (DoS). (bsc#1111014) CVE-2018-10839: Fixed an integer overflow leading to a buffer overflow in the ne2000 component (bsc#1110924) Other bugs fixed: Fixed an issue related to a domU hang on SLE12-SP3 HV (bsc#1108940) Upstream bug fixes (bsc#1027519) Fixed crashing VMs when migrating between dom0 hosts (bsc#1031382) Fixed an issue with xpti=no-dom0 not working as expected (bsc#1105528) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-03-18
    modified2019-01-08
    plugin id121004
    published2019-01-08
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/121004
    titleSUSE SLES11 Security Update : xen (SUSE-SU-2019:13921-1)

Redhat

advisories
  • rhsa
    idRHSA-2019:2425
  • rhsa
    idRHSA-2019:2553
rpms
  • qemu-img-rhev-10:2.12.0-33.el7
  • qemu-kvm-common-rhev-10:2.12.0-33.el7
  • qemu-kvm-rhev-10:2.12.0-33.el7
  • qemu-kvm-rhev-debuginfo-10:2.12.0-33.el7
  • qemu-kvm-tools-rhev-10:2.12.0-33.el7
  • qemu-img-rhev-10:2.12.0-33.el7
  • qemu-kvm-common-rhev-10:2.12.0-33.el7
  • qemu-kvm-rhev-10:2.12.0-33.el7
  • qemu-kvm-rhev-debuginfo-10:2.12.0-33.el7
  • qemu-kvm-tools-rhev-10:2.12.0-33.el7