Vulnerabilities > CVE-2018-16872 - Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in multiple products
Summary
A flaw was found in qemu Media Transfer Protocol (MTP). The code opening files in usb_mtp_get_object and usb_mtp_get_partial_object and directories in usb_mtp_object_readdir doesn't consider that the underlying filesystem may have changed since the time lstat(2) was called in usb_mtp_object_alloc, a classical TOCTTOU problem. An attacker with write access to the host filesystem shared with a guest can use this property to navigate the host filesystem in the context of the QEMU process and read any file the QEMU process has access to. Access to the filesystem may be local or via a network share protocol such as CIFS.
Vulnerable Configurations
Common Weakness Enumeration (CWE)
Common Attack Pattern Enumeration and Classification (CAPEC)
- Leveraging Race Conditions via Symbolic Links This attack leverages the use of symbolic links (Symlinks) in order to write to sensitive files. An attacker can create a Symlink link to a target file not otherwise accessible to her. When the privileged program tries to create a temporary file with the same name as the Symlink link, it will actually write to the target file pointed to by the attackers' Symlink link. If the attacker can insert malicious content in the temporary file she will be writing to the sensitive file by using the Symlink. The race occurs because the system checks if the temporary file exists, then creates the file. The attacker would typically create the Symlink during the interval between the check and the creation of the temporary file.
- Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions This attack targets a race condition occurring between the time of check (state) for a resource and the time of use of a resource. The typical example is the file access. The attacker can leverage a file access race condition by "running the race", meaning that he would modify the resource between the first time the target program accesses the file and the time the target program uses the file. During that period of time, the attacker could do something such as replace the file and cause an escalation of privilege.
Nessus
NASL family Huawei Local Security Checks NASL id EULEROS_SA-2019-2352.NASL description According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities : - In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.(CVE-2019-6778) - A flaw was found in QEMU last seen 2020-06-01 modified 2020-06-02 plugin id 131517 published 2019-12-03 reporter This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/131517 title EulerOS Virtualization for ARM 64 3.0.3.0 : qemu-kvm (EulerOS-SA-2019-2352) code # # (C) Tenable Network Security, Inc. # include("compat.inc"); if (description) { script_id(131517); script_version("1.2"); script_cvs_date("Date: 2019/12/10"); script_cve_id( "CVE-2018-16872", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-3812", "CVE-2019-6778" ); script_name(english:"EulerOS Virtualization for ARM 64 3.0.3.0 : qemu-kvm (EulerOS-SA-2019-2352)"); script_summary(english:"Checks the rpm output for the updated packages."); script_set_attribute(attribute:"synopsis", value: "The remote EulerOS Virtualization for ARM 64 host is missing multiple security updates."); script_set_attribute(attribute:"description", value: "According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities : - In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.(CVE-2019-6778) - A flaw was found in QEMU's Media Transfer Protocol (MTP). The code opening files in usb_mtp_get_object and usb_mtp_get_partial_object and directories in usb_mtp_object_readdir doesn't consider that the underlying filesystem may have changed since the time lstat(2) was called in usb_mtp_object_alloc, a classical TOCTTOU problem. An attacker with write access to the host filesystem, shared with a guest, can use this property to navigate the host filesystem in the context of the QEMU process and read any file the QEMU process has access to. Access to the filesystem may be local or via a network share protocol such as CIFS.(CVE-2018-16872) - hw/9pfs/cofile.c and hw/9pfs/9p.c in QEMU can modify an fid path while it is being accessed by a second thread, leading to (for example) a use-after-free outcome.(CVE-2018-19364) - v9fs_wstat in hw/9pfs/9p.c in QEMU allows guest OS users to cause a denial of service (crash) because of a race condition during file renaming.(CVE-2018-19489) - QEMU, through version 2.10 and through version 3.1.0, is vulnerable to an out-of-bounds read of up to 128 bytes in the hw/i2c/i2c-ddc.c:i2c_ddc() function. A local attacker with permission to execute i2c commands could exploit this to read stack memory of the qemu process on the host.(CVE-2019-3812) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues."); # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-2352 script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?47616c15"); script_set_attribute(attribute:"solution", value: "Update the affected qemu-kvm packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"patch_publication_date", value:"2019/12/03"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/12/03"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-img"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm-common"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm-tools"); script_set_attribute(attribute:"cpe", value:"cpe:/o:huawei:euleros:uvp:3.0.3.0"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_family(english:"Huawei Local Security Checks"); script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof."); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/EulerOS/release", "Host/EulerOS/rpm-list", "Host/EulerOS/uvp_version"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/EulerOS/release"); if (isnull(release) || release !~ "^EulerOS") audit(AUDIT_OS_NOT, "EulerOS"); uvp = get_kb_item("Host/EulerOS/uvp_version"); if (uvp != "3.0.3.0") audit(AUDIT_OS_NOT, "EulerOS Virtualization 3.0.3.0"); if (!get_kb_item("Host/EulerOS/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "aarch64" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "EulerOS", cpu); if ("aarch64" >!< cpu) audit(AUDIT_ARCH_NOT, "aarch64", cpu); flag = 0; pkgs = ["qemu-img-2.8.1-30.092", "qemu-kvm-2.8.1-30.092", "qemu-kvm-common-2.8.1-30.092", "qemu-kvm-tools-2.8.1-30.092"]; foreach (pkg in pkgs) if (rpm_check(release:"EulerOS-2.0", reference:pkg)) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-kvm"); }
NASL family Debian Local Security Checks NASL id DEBIAN_DSA-4454.NASL description Multiple security issues were discovered in QEMU, a fast processor emulator, which could result in denial of service, the execution of arbitrary code or information disclosure. In addition this update backports support to passthrough the new md-clear CPU flag added in the intel-microcode update shipped in DSA 4447 to x86-based guests. last seen 2020-06-01 modified 2020-06-02 plugin id 125609 published 2019-05-31 reporter This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/125609 title Debian DSA-4454-1 : qemu - security update code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Debian Security Advisory DSA-4454. The text # itself is copyright (C) Software in the Public Interest, Inc. # include("compat.inc"); if (description) { script_id(125609); script_version("1.2"); script_cvs_date("Date: 2019/06/04 9:45:00"); script_cve_id("CVE-2018-11806", "CVE-2018-12617", "CVE-2018-16872", "CVE-2018-17958", "CVE-2018-18849", "CVE-2018-18954", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-12155", "CVE-2019-3812", "CVE-2019-6778", "CVE-2019-9824"); script_xref(name:"DSA", value:"4454"); script_name(english:"Debian DSA-4454-1 : qemu - security update"); script_summary(english:"Checks dpkg output for the updated package"); script_set_attribute( attribute:"synopsis", value:"The remote Debian host is missing a security-related update." ); script_set_attribute( attribute:"description", value: "Multiple security issues were discovered in QEMU, a fast processor emulator, which could result in denial of service, the execution of arbitrary code or information disclosure. In addition this update backports support to passthrough the new md-clear CPU flag added in the intel-microcode update shipped in DSA 4447 to x86-based guests." ); script_set_attribute( attribute:"see_also", value:"https://security-tracker.debian.org/tracker/source-package/qemu" ); script_set_attribute( attribute:"see_also", value:"https://packages.debian.org/source/stretch/qemu" ); script_set_attribute( attribute:"see_also", value:"https://www.debian.org/security/2019/dsa-4454" ); script_set_attribute( attribute:"solution", value: "Upgrade the qemu packages. For the stable distribution (stretch), these problems have been fixed in version 1:2.8+dfsg-6+deb9u6." ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:C/I:C/A:C"); script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available"); script_set_attribute(attribute:"exploit_available", value:"true"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu"); script_set_attribute(attribute:"cpe", value:"cpe:/o:debian:debian_linux:9.0"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/06/13"); script_set_attribute(attribute:"patch_publication_date", value:"2019/05/30"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/05/31"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Debian Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/Debian/release", "Host/Debian/dpkg-l"); exit(0); } include("audit.inc"); include("debian_package.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); if (!get_kb_item("Host/Debian/release")) audit(AUDIT_OS_NOT, "Debian"); if (!get_kb_item("Host/Debian/dpkg-l")) audit(AUDIT_PACKAGE_LIST_MISSING); flag = 0; if (deb_check(release:"9.0", prefix:"qemu", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-block-extra", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-guest-agent", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-kvm", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-arm", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-common", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-mips", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-misc", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-ppc", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-sparc", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-system-x86", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-user", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-user-binfmt", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-user-static", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (deb_check(release:"9.0", prefix:"qemu-utils", reference:"1:2.8+dfsg-6+deb9u6")) flag++; if (flag) { if (report_verbosity > 0) security_hole(port:0, extra:deb_report_get()); else security_hole(0); exit(0); } else audit(AUDIT_HOST_NOT, "affected");
NASL family SuSE Local Security Checks NASL id SUSE_SU-2019-0582-1.NASL description This update for qemu fixes the following issues : Security vulnerabilities addressed : CVE-2019-6778: Fixed an out-of-bounds access in slirp (bsc#1123156) CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493) CVE-2018-19489: Fixed a Denial-of-Service in virtfs (bsc#1117275) CVE-2018-19364: Fixed an use-after-free vulnerability if virtfs interface is deliberately abused (bsc#1116717) CVE-2018-18954: Fixed an out-of-bounds access performing PowerNV memory operations (bsc#1114957) CVE-2017-13673: Fixed a reachable assert failure during during display update (bsc#1056386) CVE-2017-13672: Fixed an out-of-bounds read access during display update (bsc#1056334) CVE-2018-7858: Fixed an out-of-bounds access in cirrus when updating vga display allowing for Denial-of-Service (bsc#1084604) Other bug fixes and changes: Fix pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600) Fix bad guest time after migration (bsc#1113231) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 122776 published 2019-03-12 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122776 title SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2019:0582-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from SUSE update advisory SUSE-SU-2019:0582-1. # The text itself is copyright (C) SUSE. # include("compat.inc"); if (description) { script_id(122776); script_version("1.4"); script_cvs_date("Date: 2020/02/05"); script_cve_id("CVE-2017-13672", "CVE-2017-13673", "CVE-2018-16872", "CVE-2018-18954", "CVE-2018-19364", "CVE-2018-19489", "CVE-2018-7858", "CVE-2019-6778"); script_name(english:"SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2019:0582-1)"); script_summary(english:"Checks rpm output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote SUSE host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security vulnerabilities addressed : CVE-2019-6778: Fixed an out-of-bounds access in slirp (bsc#1123156) CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493) CVE-2018-19489: Fixed a Denial-of-Service in virtfs (bsc#1117275) CVE-2018-19364: Fixed an use-after-free vulnerability if virtfs interface is deliberately abused (bsc#1116717) CVE-2018-18954: Fixed an out-of-bounds access performing PowerNV memory operations (bsc#1114957) CVE-2017-13673: Fixed a reachable assert failure during during display update (bsc#1056386) CVE-2017-13672: Fixed an out-of-bounds read access during display update (bsc#1056334) CVE-2018-7858: Fixed an out-of-bounds access in cirrus when updating vga display allowing for Denial-of-Service (bsc#1084604) Other bug fixes and changes: Fix pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600) Fix bad guest time after migration (bsc#1113231) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1056334" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1056386" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1084604" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1113231" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1114957" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1121600" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123156" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-13672/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-13673/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-16872/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-18954/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19364/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19489/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-7858/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-6778/" ); # https://www.suse.com/support/update/announcement/2019/suse-su-20190582-1/ script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?f6d1a06d" ); script_set_attribute( attribute:"solution", value: "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or 'zypper patch'. Alternatively you can run the command listed for your product : SUSE Linux Enterprise Server 12-SP3:zypper in -t patch SUSE-SLE-SERVER-12-SP3-2019-582=1 SUSE Linux Enterprise Desktop 12-SP3:zypper in -t patch SUSE-SLE-DESKTOP-12-SP3-2019-582=1 SUSE CaaS Platform ALL : To install this update, use the SUSE CaaS Platform Velum dashboard. It will inform you if it detects new updates and let you then trigger updating of the complete cluster in a controlled way. SUSE CaaS Platform 3.0 : To install this update, use the SUSE CaaS Platform Velum dashboard. It will inform you if it detects new updates and let you then trigger updating of the complete cluster in a controlled way." ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86-debuginfo"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12"); script_set_attribute(attribute:"vuln_publication_date", value:"2017/08/29"); script_set_attribute(attribute:"patch_publication_date", value:"2019/03/11"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/12"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE"); os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE"); os_ver = os_ver[1]; if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu); sp = get_kb_item("Host/SuSE/patchlevel"); if (isnull(sp)) sp = "0"; if (os_ver == "SLES12" && (! preg(pattern:"^(3)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP3", os_ver + " SP" + sp); if (os_ver == "SLED12" && (! preg(pattern:"^(3)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP3", os_ver + " SP" + sp); flag = 0; if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-block-rbd-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-x86-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", cpu:"s390x", reference:"qemu-s390-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", cpu:"s390x", reference:"qemu-s390-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-curl-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-curl-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-iscsi-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-iscsi-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-ssh-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-block-ssh-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-debugsource-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-guest-agent-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-guest-agent-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-lang-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-tools-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-tools-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLES12", sp:"3", reference:"qemu-kvm-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-block-curl-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-block-curl-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-debugsource-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-kvm-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-tools-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-tools-debuginfo-2.9.1-6.28.1")) flag++; if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"qemu-x86-2.9.1-6.28.1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu"); }
NASL family Fedora Local Security Checks NASL id FEDORA_2019-0664C7724D.NASL description - fix crash with virgl enabled (bz #1692323) - linux-user: make pwrite64/pread64(fd, NULL, 0, offset) return 0 (bz #1174267) - Fix build with latest gluster (bz #1684298) - CVE-2018-20123: pvrdma: memory leakage in device hotplug (bz #1658964) - CVE-2018-16872: usb-mtp: path traversal issue (bz #1659150) - CVE-2018-20191: pvrdma: uar_read leads to NULL deref (bz #1660315) - CVE-2019-6501: scsi-generic: possible OOB access (bz #1669005) - CVE-2019-6778: slirp: heap buffer overflow (bz #1669072) - CVE-2019-3812: Out-of-bounds read in hw/i2c/i2c-ddc.c allows for memory disclosure (bz #1678081) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 124467 published 2019-05-02 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/124467 title Fedora 30 : 2:qemu (2019-0664c7724d) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Fedora Security Advisory FEDORA-2019-0664c7724d. # include("compat.inc"); if (description) { script_id(124467); script_version("1.3"); script_cvs_date("Date: 2020/01/21"); script_cve_id("CVE-2018-16872", "CVE-2018-20123", "CVE-2018-20191", "CVE-2019-3812", "CVE-2019-6501", "CVE-2019-6778"); script_xref(name:"FEDORA", value:"2019-0664c7724d"); script_name(english:"Fedora 30 : 2:qemu (2019-0664c7724d)"); script_summary(english:"Checks rpm output for the updated package."); script_set_attribute( attribute:"synopsis", value:"The remote Fedora host is missing a security update." ); script_set_attribute( attribute:"description", value: " - fix crash with virgl enabled (bz #1692323) - linux-user: make pwrite64/pread64(fd, NULL, 0, offset) return 0 (bz #1174267) - Fix build with latest gluster (bz #1684298) - CVE-2018-20123: pvrdma: memory leakage in device hotplug (bz #1658964) - CVE-2018-16872: usb-mtp: path traversal issue (bz #1659150) - CVE-2018-20191: pvrdma: uar_read leads to NULL deref (bz #1660315) - CVE-2019-6501: scsi-generic: possible OOB access (bz #1669005) - CVE-2019-6778: slirp: heap buffer overflow (bz #1669072) - CVE-2019-3812: Out-of-bounds read in hw/i2c/i2c-ddc.c allows for memory disclosure (bz #1678081) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bodhi.fedoraproject.org/updates/FEDORA-2019-0664c7724d" ); script_set_attribute( attribute:"solution", value:"Update the affected 2:qemu package." ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-6778"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:fedoraproject:fedora:2:qemu"); script_set_attribute(attribute:"cpe", value:"cpe:/o:fedoraproject:fedora:30"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/12/13"); script_set_attribute(attribute:"patch_publication_date", value:"2019/03/28"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/05/02"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Fedora Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/RedHat/release"); if (isnull(release) || "Fedora" >!< release) audit(AUDIT_OS_NOT, "Fedora"); os_ver = pregmatch(pattern: "Fedora.*release ([0-9]+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Fedora"); os_ver = os_ver[1]; if (! preg(pattern:"^30([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Fedora 30", "Fedora " + os_ver); if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Fedora", cpu); flag = 0; if (rpm_check(release:"FC30", reference:"qemu-3.1.0-6.fc30", epoch:"2")) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "2:qemu"); }
NASL family SuSE Local Security Checks NASL id SUSE_SU-2019-0471-1.NASL description This update for qemu fixes the following issues : Security issue fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 122419 published 2019-02-25 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122419 title SUSE SLES12 Security Update : qemu (SUSE-SU-2019:0471-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from SUSE update advisory SUSE-SU-2019:0471-1. # The text itself is copyright (C) SUSE. # include("compat.inc"); if (description) { script_id(122419); script_version("1.4"); script_cvs_date("Date: 2020/02/07"); script_cve_id("CVE-2018-16872", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-6778"); script_name(english:"SUSE SLES12 Security Update : qemu (SUSE-SU-2019:0471-1)"); script_summary(english:"Checks rpm output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote SUSE host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security issue fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123156" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-16872/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19364/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19489/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-6778/" ); # https://www.suse.com/support/update/announcement/2019/suse-su-20190471-1/ script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?3e4ba233" ); script_set_attribute( attribute:"solution", value: "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or 'zypper patch'. Alternatively you can run the command listed for your product : SUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch SUSE-SLE-SERVER-12-SP1-2019-471=1" ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/12/13"); script_set_attribute(attribute:"patch_publication_date", value:"2019/02/22"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/02/25"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE"); os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE"); os_ver = os_ver[1]; if (! preg(pattern:"^(SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES12", "SUSE " + os_ver); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu); sp = get_kb_item("Host/SuSE/patchlevel"); if (isnull(sp)) sp = "0"; if (os_ver == "SLES12" && (! preg(pattern:"^(1)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP1", os_ver + " SP" + sp); flag = 0; if (rpm_check(release:"SLES12", sp:"1", cpu:"x86_64", reference:"qemu-block-rbd-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", cpu:"x86_64", reference:"qemu-x86-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", cpu:"s390x", reference:"qemu-s390-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", cpu:"s390x", reference:"qemu-s390-debuginfo-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-block-curl-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-block-curl-debuginfo-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-debugsource-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-guest-agent-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-guest-agent-debuginfo-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-lang-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-tools-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-tools-debuginfo-2.3.1-33.20.1")) flag++; if (rpm_check(release:"SLES12", sp:"1", reference:"qemu-kvm-2.3.1-33.20.1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu"); }
NASL family Debian Local Security Checks NASL id DEBIAN_DLA-1694.NASL description Several vulnerabilities were found in QEMU, a fast processor emulator : CVE-2018-12617 The qmp_guest_file_read function (qga/commands-posix.c) is affected by an integer overflow and subsequent memory allocation failure. This weakness might be leveraged by remote attackers to cause denial of service (application crash). CVE-2018-16872 The usb_mtp_get_object, usb_mtp_get_partial_object and usb_mtp_object_readdir functions (hw/usb/dev-mtp.c) are affected by a symlink attack. Remote attackers might leverage this vulnerability to perform information disclosure. CVE-2019-6778 The tcp_emu function (slirp/tcp_subr.c) is affected by a heap buffer overflow caused by insufficient validation of available space in the sc_rcv->sb_data buffer. Remote attackers might leverage this flaw to cause denial of service, or any other unspecified impact. For Debian 8 last seen 2020-06-01 modified 2020-06-02 plugin id 122511 published 2019-03-01 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122511 title Debian DLA-1694-1 : qemu security update code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Debian Security Advisory DLA-1694-1. The text # itself is copyright (C) Software in the Public Interest, Inc. # include("compat.inc"); if (description) { script_id(122511); script_version("1.4"); script_cvs_date("Date: 2020/02/07"); script_cve_id("CVE-2018-12617", "CVE-2018-16872", "CVE-2019-6778"); script_name(english:"Debian DLA-1694-1 : qemu security update"); script_summary(english:"Checks dpkg output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote Debian host is missing a security update." ); script_set_attribute( attribute:"description", value: "Several vulnerabilities were found in QEMU, a fast processor emulator : CVE-2018-12617 The qmp_guest_file_read function (qga/commands-posix.c) is affected by an integer overflow and subsequent memory allocation failure. This weakness might be leveraged by remote attackers to cause denial of service (application crash). CVE-2018-16872 The usb_mtp_get_object, usb_mtp_get_partial_object and usb_mtp_object_readdir functions (hw/usb/dev-mtp.c) are affected by a symlink attack. Remote attackers might leverage this vulnerability to perform information disclosure. CVE-2019-6778 The tcp_emu function (slirp/tcp_subr.c) is affected by a heap buffer overflow caused by insufficient validation of available space in the sc_rcv->sb_data buffer. Remote attackers might leverage this flaw to cause denial of service, or any other unspecified impact. For Debian 8 'Jessie', these problems have been fixed in version 1:2.1+dfsg-12+deb8u10. We recommend that you upgrade your qemu packages. NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://lists.debian.org/debian-lts-announce/2019/02/msg00041.html" ); script_set_attribute( attribute:"see_also", value:"https://packages.debian.org/source/jessie/qemu" ); script_set_attribute(attribute:"solution", value:"Upgrade the affected packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C"); script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-6778"); script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available"); script_set_attribute(attribute:"exploit_available", value:"true"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-arm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-common"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-mips"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-misc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-ppc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-sparc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-system-x86"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-user"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-user-binfmt"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-user-static"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:debian:debian_linux:qemu-utils"); script_set_attribute(attribute:"cpe", value:"cpe:/o:debian:debian_linux:8.0"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/06/21"); script_set_attribute(attribute:"patch_publication_date", value:"2019/02/28"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/01"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Debian Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/Debian/release", "Host/Debian/dpkg-l"); exit(0); } include("audit.inc"); include("debian_package.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); if (!get_kb_item("Host/Debian/release")) audit(AUDIT_OS_NOT, "Debian"); if (!get_kb_item("Host/Debian/dpkg-l")) audit(AUDIT_PACKAGE_LIST_MISSING); flag = 0; if (deb_check(release:"8.0", prefix:"qemu", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-guest-agent", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-kvm", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-arm", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-common", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-mips", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-misc", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-ppc", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-sparc", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-system-x86", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-user", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-user-binfmt", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-user-static", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (deb_check(release:"8.0", prefix:"qemu-utils", reference:"1:2.1+dfsg-12+deb8u10")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:deb_report_get()); else security_warning(0); exit(0); } else audit(AUDIT_HOST_NOT, "affected");
NASL family SuSE Local Security Checks NASL id SUSE_SU-2019-0423-1.NASL description This update for qemu fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). CVE-2018-18954: Fixed a denial of service vulnerability related to PowerPC PowerNV memory operations (bsc#1114957). Non-security issues fixed: Improved disk performance for qemu on xen (bsc#1100408). Fixed xen offline migration (bsc#1079730, bsc#1101982, bsc#1063993). Fixed pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600). Use /bin/bash to echo value into sys fs for ksm control (bsc#1112646). Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 122309 published 2019-02-19 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122309 title SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2019:0423-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from SUSE update advisory SUSE-SU-2019:0423-1. # The text itself is copyright (C) SUSE. # include("compat.inc"); if (description) { script_id(122309); script_version("1.4"); script_cvs_date("Date: 2020/02/10"); script_cve_id("CVE-2018-16872", "CVE-2018-18954", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-6778"); script_name(english:"SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2019:0423-1)"); script_summary(english:"Checks rpm output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote SUSE host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). CVE-2018-18954: Fixed a denial of service vulnerability related to PowerPC PowerNV memory operations (bsc#1114957). Non-security issues fixed: Improved disk performance for qemu on xen (bsc#1100408). Fixed xen offline migration (bsc#1079730, bsc#1101982, bsc#1063993). Fixed pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600). Use /bin/bash to echo value into sys fs for ksm control (bsc#1112646). Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1063993" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1079730" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1100408" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1101982" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1112646" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1114957" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1121600" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123156" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123179" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-16872/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-18954/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19364/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19489/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-6778/" ); # https://www.suse.com/support/update/announcement/2019/suse-su-20190423-1/ script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?a05b506d" ); script_set_attribute( attribute:"solution", value: "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or 'zypper patch'. Alternatively you can run the command listed for your product : SUSE Linux Enterprise Module for Server Applications 15:zypper in -t patch SUSE-SLE-Module-Server-Applications-15-2019-423=1 SUSE Linux Enterprise Module for Open Buildservice Development Tools 15:zypper in -t patch SUSE-SLE-Module-Development-Tools-OBS-15-2019-423=1 SUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch SUSE-SLE-Module-Basesystem-15-2019-423=1" ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-dmg"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-dmg-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-extra"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-extra-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86-debuginfo"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:15"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/11/15"); script_set_attribute(attribute:"patch_publication_date", value:"2019/02/18"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/02/19"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE"); os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE"); os_ver = os_ver[1]; if (! preg(pattern:"^(SLED15|SLES15)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED15 / SLES15", "SUSE " + os_ver); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu); sp = get_kb_item("Host/SuSE/patchlevel"); if (isnull(sp)) sp = "0"; if (os_ver == "SLES15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLES15 SP0", os_ver + " SP" + sp); if (os_ver == "SLED15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLED15 SP0", os_ver + " SP" + sp); flag = 0; if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"qemu-x86-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", cpu:"s390x", reference:"qemu-s390-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", cpu:"s390x", reference:"qemu-s390-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-curl-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-curl-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-iscsi-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-iscsi-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-rbd-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-rbd-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-ssh-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-ssh-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-guest-agent-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-guest-agent-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-lang-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-kvm-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-dmg-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-dmg-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-extra-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-extra-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-tools-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-tools-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-block-dmg-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-block-dmg-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-extra-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-extra-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debugsource-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-tools-2.11.2-9.20.1")) flag++; if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-tools-debuginfo-2.11.2-9.20.1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu"); }
NASL family Huawei Local Security Checks NASL id EULEROS_SA-2020-1266.NASL description According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities : - In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.(CVE-2019-6778) - A flaw was found in QEMU last seen 2020-03-19 modified 2020-03-13 plugin id 134555 published 2020-03-13 reporter This script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/134555 title EulerOS Virtualization for ARM 64 3.0.2.0 : qemu-kvm (EulerOS-SA-2020-1266) code # # (C) Tenable Network Security, Inc. # include("compat.inc"); if (description) { script_id(134555); script_version("1.2"); script_set_attribute(attribute:"plugin_modification_date", value:"2020/03/19"); script_cve_id( "CVE-2017-5525", "CVE-2017-5526", "CVE-2017-5898", "CVE-2017-5973", "CVE-2017-5987", "CVE-2018-16872", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-3812", "CVE-2019-6778" ); script_name(english:"EulerOS Virtualization for ARM 64 3.0.2.0 : qemu-kvm (EulerOS-SA-2020-1266)"); script_summary(english:"Checks the rpm output for the updated packages."); script_set_attribute(attribute:"synopsis", value: "The remote EulerOS Virtualization for ARM 64 host is missing multiple security updates."); script_set_attribute(attribute:"description", value: "According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities : - In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.(CVE-2019-6778) - A flaw was found in QEMU's Media Transfer Protocol (MTP). The code opening files in usb_mtp_get_object and usb_mtp_get_partial_object and directories in usb_mtp_object_readdir doesn't consider that the underlying filesystem may have changed since the time lstat(2) was called in usb_mtp_object_alloc, a classical TOCTTOU problem. An attacker with write access to the host filesystem, shared with a guest, can use this property to navigate the host filesystem in the context of the QEMU process and read any file the QEMU process has access to. Access to the filesystem may be local or via a network share protocol such as CIFS.(CVE-2018-16872) - hw/9pfs/cofile.c and hw/9pfs/9p.c in QEMU can modify an fid path while it is being accessed by a second thread, leading to (for example) a use-after-free outcome.(CVE-2018-19364) - v9fs_wstat in hw/9pfs/9p.c in QEMU allows guest OS users to cause a denial of service (crash) because of a race condition during file renaming.(CVE-2018-19489) - QEMU, through version 2.10 and through version 3.1.0, is vulnerable to an out-of-bounds read of up to 128 bytes in the hw/i2c/i2c-ddc.c:i2c_ddc() function. A local attacker with permission to execute i2c commands could exploit this to read stack memory of the qemu process on the host.(CVE-2019-3812) - Memory leak in hw/audio/ac97.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (host memory consumption and QEMU process crash) via a large number of device unplug operations.(CVE-2017-5525) - Memory leak in hw/audio/es1370.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (host memory consumption and QEMU process crash) via a large number of device unplug operations.(CVE-2017-5526) - The sdhci_sdma_transfer_multi_blocks function in hw/sd/sdhci.c in QEMU (aka Quick Emulator) allows local OS guest privileged users to cause a denial of service (infinite loop and QEMU process crash) via vectors involving the transfer mode register during multi block transfer.(CVE-2017-5987) - An integer overflow flaw was found in Quick Emulator (QEMU) in the CCID Card device support. The flaw could occur while passing messages via command/response packets to and from the host. A privileged user inside a guest could use this flaw to crash the QEMU process.(CVE-2017-5898) - The xhci_kick_epctx function in hw/usb/hcd-xhci.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (infinite loop and QEMU process crash) via vectors related to control transfer descriptor sequence.(CVE-2017-5973) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues."); # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2020-1266 script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?70651d73"); script_set_attribute(attribute:"solution", value: "Update the affected qemu-kvm packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-6778"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"patch_publication_date", value:"2020/03/13"); script_set_attribute(attribute:"plugin_publication_date", value:"2020/03/13"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-img"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm-common"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm-tools"); script_set_attribute(attribute:"cpe", value:"cpe:/o:huawei:euleros:uvp:3.0.2.0"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_family(english:"Huawei Local Security Checks"); script_copyright(english:"This script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/EulerOS/release", "Host/EulerOS/rpm-list", "Host/EulerOS/uvp_version"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/EulerOS/release"); if (isnull(release) || release !~ "^EulerOS") audit(AUDIT_OS_NOT, "EulerOS"); uvp = get_kb_item("Host/EulerOS/uvp_version"); if (uvp != "3.0.2.0") audit(AUDIT_OS_NOT, "EulerOS Virtualization 3.0.2.0"); if (!get_kb_item("Host/EulerOS/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "aarch64" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "EulerOS", cpu); if ("aarch64" >!< cpu) audit(AUDIT_ARCH_NOT, "aarch64", cpu); flag = 0; pkgs = ["qemu-img-2.8.1-30.100", "qemu-kvm-2.8.1-30.100", "qemu-kvm-common-2.8.1-30.100", "qemu-kvm-tools-2.8.1-30.100"]; foreach (pkg in pkgs) if (rpm_check(release:"EulerOS-2.0", reference:pkg)) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-kvm"); }
NASL family Ubuntu Local Security Checks NASL id UBUNTU_USN-3923-1.NASL description Michael Hanselmann discovered that QEMU incorrectly handled the Media Transfer Protocol (MTP). An attacker inside the guest could use this issue to read or write arbitrary files and cause a denial of service, or possibly execute arbitrary code. This issue only affected Ubuntu 18.10. (CVE-2018-16867) Michael Hanselmann discovered that QEMU incorrectly handled the Media Transfer Protocol (MTP). An attacker inside the guest could use this issue to read arbitrary files, contrary to expectations. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-16872) Zhibin Hu discovered that QEMU incorrectly handled the Plan 9 File System support. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-19489) Li Quang and Saar Amar discovered multiple issues in the QEMU PVRDMA device. An attacker inside the guest could use these issues to cause a denial of service, or possibly execute arbitrary code. This issue only affected Ubuntu 18.10. These issues were resolved by disabling PVRDMA support in Ubuntu 18.10. (CVE-2018-20123, CVE-2018-20124, CVE-2018-20125, CVE-2018-20126, CVE-2018-20191, CVE-2018-20216) Michael Hanselmann discovered that QEMU incorrectly handled certain i2c commands. A local attacker could possibly use this issue to read QEMU process memory. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2019-3812) It was discovered that QEMU incorrectly handled the Slirp networking back-end. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. (CVE-2019-6778). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 123457 published 2019-03-28 reporter Ubuntu Security Notice (C) 2019-2020 Canonical, Inc. / NASL script (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/123457 title Ubuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 18.10 : qemu vulnerabilities (USN-3923-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Ubuntu Security Notice USN-3923-1. The text # itself is copyright (C) Canonical, Inc. See # <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered # trademark of Canonical, Inc. # include("compat.inc"); if (description) { script_id(123457); script_version("1.3"); script_cvs_date("Date: 2020/01/27"); script_cve_id("CVE-2018-16867", "CVE-2018-16872", "CVE-2018-19489", "CVE-2018-20123", "CVE-2018-20124", "CVE-2018-20125", "CVE-2018-20126", "CVE-2018-20191", "CVE-2018-20216", "CVE-2019-3812", "CVE-2019-6778"); script_xref(name:"USN", value:"3923-1"); script_name(english:"Ubuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 18.10 : qemu vulnerabilities (USN-3923-1)"); script_summary(english:"Checks dpkg output for updated packages."); script_set_attribute( attribute:"synopsis", value: "The remote Ubuntu host is missing one or more security-related patches." ); script_set_attribute( attribute:"description", value: "Michael Hanselmann discovered that QEMU incorrectly handled the Media Transfer Protocol (MTP). An attacker inside the guest could use this issue to read or write arbitrary files and cause a denial of service, or possibly execute arbitrary code. This issue only affected Ubuntu 18.10. (CVE-2018-16867) Michael Hanselmann discovered that QEMU incorrectly handled the Media Transfer Protocol (MTP). An attacker inside the guest could use this issue to read arbitrary files, contrary to expectations. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-16872) Zhibin Hu discovered that QEMU incorrectly handled the Plan 9 File System support. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-19489) Li Quang and Saar Amar discovered multiple issues in the QEMU PVRDMA device. An attacker inside the guest could use these issues to cause a denial of service, or possibly execute arbitrary code. This issue only affected Ubuntu 18.10. These issues were resolved by disabling PVRDMA support in Ubuntu 18.10. (CVE-2018-20123, CVE-2018-20124, CVE-2018-20125, CVE-2018-20126, CVE-2018-20191, CVE-2018-20216) Michael Hanselmann discovered that QEMU incorrectly handled certain i2c commands. A local attacker could possibly use this issue to read QEMU process memory. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2019-3812) It was discovered that QEMU incorrectly handled the Slirp networking back-end. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. (CVE-2019-6778). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://usn.ubuntu.com/3923-1/" ); script_set_attribute(attribute:"solution", value:"Update the affected packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-6778"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-aarch64"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-arm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-data"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-gui"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-mips"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-misc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-ppc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-s390x"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-sparc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-x86"); script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:14.04"); script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:16.04"); script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:18.04:-:lts"); script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:18.10"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/12/12"); script_set_attribute(attribute:"patch_publication_date", value:"2019/03/27"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/28"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"Ubuntu Security Notice (C) 2019-2020 Canonical, Inc. / NASL script (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Ubuntu Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/cpu", "Host/Ubuntu", "Host/Ubuntu/release", "Host/Debian/dpkg-l"); exit(0); } include("audit.inc"); include("ubuntu.inc"); include("misc_func.inc"); if ( ! get_kb_item("Host/local_checks_enabled") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/Ubuntu/release"); if ( isnull(release) ) audit(AUDIT_OS_NOT, "Ubuntu"); release = chomp(release); if (! preg(pattern:"^(14\.04|16\.04|18\.04|18\.10)$", string:release)) audit(AUDIT_OS_NOT, "Ubuntu 14.04 / 16.04 / 18.04 / 18.10", "Ubuntu " + release); if ( ! get_kb_item("Host/Debian/dpkg-l") ) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Ubuntu", cpu); flag = 0; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-aarch64", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-arm", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-mips", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-misc", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-ppc", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-sparc", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-x86", pkgver:"2.0.0+dfsg-2ubuntu1.45")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-aarch64", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-arm", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-mips", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-misc", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-ppc", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-s390x", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-sparc", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-x86", pkgver:"1:2.5+dfsg-5ubuntu10.36")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-arm", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-mips", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-misc", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-ppc", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-s390x", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-sparc", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-x86", pkgver:"1:2.11+dfsg-1ubuntu7.12")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-arm", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-data", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-gui", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-mips", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-misc", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-ppc", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-s390x", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-sparc", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-x86", pkgver:"1:2.12+dfsg-3ubuntu8.6")) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : ubuntu_report_get() ); exit(0); } else { tested = ubuntu_pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-system / qemu-system-aarch64 / qemu-system-arm / etc"); }
NASL family SuSE Local Security Checks NASL id OPENSUSE-2019-1074.NASL description This update for qemu fixes the following issues : Security vulnerabilities addressed : - CVE-2019-6778: Fixed an out-of-bounds access in slirp (bsc#1123156) - CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493) - CVE-2018-19489: Fixed a Denial-of-Service in virtfs (bsc#1117275) - CVE-2018-19364: Fixed an use-after-free vulnerability if virtfs interface is deliberately abused (bsc#1116717) - CVE-2018-18954: Fixed an out-of-bounds access performing PowerNV memory operations (bsc#1114957) - CVE-2017-13673: Fixed a reachable assert failure during during display update (bsc#1056386) - CVE-2017-13672: Fixed an out-of-bounds read access during display update (bsc#1056334) - CVE-2018-7858: Fixed an out-of-bounds access in cirrus when updating vga display allowing for Denial-of-Service (bsc#1084604) Other bug fixes and changes : - Fix pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600) - Fix bad guest time after migration (bsc#1113231) This update was imported from the SUSE:SLE-12-SP3:Update update project. last seen 2020-06-01 modified 2020-06-02 plugin id 123493 published 2019-03-29 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/123493 title openSUSE Security Update : qemu (openSUSE-2019-1074) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from openSUSE Security Update openSUSE-2019-1074. # # The text description of this plugin is (C) SUSE LLC. # include("compat.inc"); if (description) { script_id(123493); script_version("1.2"); script_cvs_date("Date: 2020/01/27"); script_cve_id("CVE-2017-13672", "CVE-2017-13673", "CVE-2018-16872", "CVE-2018-18954", "CVE-2018-19364", "CVE-2018-19489", "CVE-2018-7858", "CVE-2019-6778"); script_name(english:"openSUSE Security Update : qemu (openSUSE-2019-1074)"); script_summary(english:"Check for the openSUSE-2019-1074 patch"); script_set_attribute( attribute:"synopsis", value:"The remote openSUSE host is missing a security update." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security vulnerabilities addressed : - CVE-2019-6778: Fixed an out-of-bounds access in slirp (bsc#1123156) - CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493) - CVE-2018-19489: Fixed a Denial-of-Service in virtfs (bsc#1117275) - CVE-2018-19364: Fixed an use-after-free vulnerability if virtfs interface is deliberately abused (bsc#1116717) - CVE-2018-18954: Fixed an out-of-bounds access performing PowerNV memory operations (bsc#1114957) - CVE-2017-13673: Fixed a reachable assert failure during during display update (bsc#1056386) - CVE-2017-13672: Fixed an out-of-bounds read access during display update (bsc#1056334) - CVE-2018-7858: Fixed an out-of-bounds access in cirrus when updating vga display allowing for Denial-of-Service (bsc#1084604) Other bug fixes and changes : - Fix pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600) - Fix bad guest time after migration (bsc#1113231) This update was imported from the SUSE:SLE-12-SP3:Update update project." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1056334" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1056386" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1084604" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113231" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114957" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121600" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1123156" ); script_set_attribute(attribute:"solution", value:"Update the affected qemu packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ipxe"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ksm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-seabios"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-sgabios"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-testsuite"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-vgabios"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:42.3"); script_set_attribute(attribute:"vuln_publication_date", value:"2017/08/29"); script_set_attribute(attribute:"patch_publication_date", value:"2019/03/28"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/29"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE"); if (release !~ "^(SUSE42\.3)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "42.3", release); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); ourarch = get_kb_item("Host/cpu"); if (!ourarch) audit(AUDIT_UNKNOWN_ARCH); if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch); flag = 0; if ( rpm_check(release:"SUSE42.3", reference:"qemu-ipxe-1.0.0+-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", reference:"qemu-linux-user-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", reference:"qemu-linux-user-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", reference:"qemu-linux-user-debugsource-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", reference:"qemu-seabios-1.10.2-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", reference:"qemu-sgabios-8-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", reference:"qemu-vgabios-1.10.2-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-arm-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-arm-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-curl-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-curl-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-dmg-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-dmg-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-iscsi-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-iscsi-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-rbd-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-ssh-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-block-ssh-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-debugsource-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-extra-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-extra-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-guest-agent-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-guest-agent-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-ksm-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-kvm-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-lang-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-ppc-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-ppc-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-s390-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-s390-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-testsuite-2.9.1-56.2") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-tools-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-tools-debuginfo-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-x86-2.9.1-56.1") ) flag++; if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.9.1-56.1") ) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-linux-user / qemu-linux-user-debuginfo / etc"); }
NASL family SuSE Local Security Checks NASL id OPENSUSE-2019-254.NASL description This update for qemu fixes the following issues : Security issues fixed : - CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). - CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). - CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). - CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). - CVE-2018-18954: Fixed a denial of service vulnerability related to PowerPC PowerNV memory operations (bsc#1114957). Non-security issues fixed : - Improved disk performance for qemu on xen (bsc#1100408). - Fixed xen offline migration (bsc#1079730, bsc#1101982, bsc#1063993). - Fixed pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600). - Use /bin/bash to echo value into sys fs for ksm control (bsc#1112646). - Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179). This update was imported from the SUSE:SLE-15:Update update project. last seen 2020-06-01 modified 2020-06-02 plugin id 122495 published 2019-02-28 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122495 title openSUSE Security Update : qemu (openSUSE-2019-254) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from openSUSE Security Update openSUSE-2019-254. # # The text description of this plugin is (C) SUSE LLC. # include("compat.inc"); if (description) { script_id(122495); script_version("1.3"); script_cvs_date("Date: 2020/02/07"); script_cve_id("CVE-2018-16872", "CVE-2018-18954", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-6778"); script_name(english:"openSUSE Security Update : qemu (openSUSE-2019-254)"); script_summary(english:"Check for the openSUSE-2019-254 patch"); script_set_attribute( attribute:"synopsis", value:"The remote openSUSE host is missing a security update." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security issues fixed : - CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). - CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). - CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). - CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). - CVE-2018-18954: Fixed a denial of service vulnerability related to PowerPC PowerNV memory operations (bsc#1114957). Non-security issues fixed : - Improved disk performance for qemu on xen (bsc#1100408). - Fixed xen offline migration (bsc#1079730, bsc#1101982, bsc#1063993). - Fixed pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600). - Use /bin/bash to echo value into sys fs for ksm control (bsc#1112646). - Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179). This update was imported from the SUSE:SLE-15:Update update project." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1063993" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1079730" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1100408" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1101982" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112646" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114957" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121600" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1123156" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1123179" ); script_set_attribute(attribute:"solution", value:"Update the affected qemu packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ipxe"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ksm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-seabios"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-sgabios"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-testsuite"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-vgabios"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.0"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/11/15"); script_set_attribute(attribute:"patch_publication_date", value:"2019/03/23"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/02/28"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE"); if (release !~ "^(SUSE15\.0)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.0", release); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); ourarch = get_kb_item("Host/cpu"); if (!ourarch) audit(AUDIT_UNKNOWN_ARCH); if (ourarch !~ "^(x86_64)$") audit(AUDIT_ARCH_NOT, "x86_64", ourarch); flag = 0; if ( rpm_check(release:"SUSE15.0", reference:"qemu-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-debugsource-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-ipxe-1.0.0+-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-ksm-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-kvm-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-lang-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debugsource-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-seabios-1.11.0-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-sgabios-8-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-testsuite-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-vgabios-1.11.0-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-2.11.2-lp150.7.18.1") ) flag++; if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-debuginfo-2.11.2-lp150.7.18.1") ) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-linux-user / qemu-linux-user-debuginfo / etc"); }
NASL family Fedora Local Security Checks NASL id FEDORA_2019-88A98CE795.NASL description - CVE-2018-19364: 9pfs: use-after-free (bz #1651359) - CVE-2018-19489: 9pfs: use-after-free renaming files (bz #1653157) - CVE-2018-16867: usb-mtp: path traversal issue (bz #1656746) - CVE-2018-16872: usb-mtp: path traversal issue (bz #1659150) - CVE-2018-20191: pvrdma: uar_read leads to NULL deref (bz #1660315) - CVE-2019-6778: slirp: heap buffer overflow (bz #1669072) - CVE-2019-3812: Out-of-bounds read in hw/i2c/i2c-ddc.c allows for memory disclosure (bz #1678081) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 123101 published 2019-03-26 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/123101 title Fedora 29 : 2:qemu (2019-88a98ce795) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from Fedora Security Advisory FEDORA-2019-88a98ce795. # include("compat.inc"); if (description) { script_id(123101); script_version("1.3"); script_cvs_date("Date: 2020/02/03"); script_cve_id("CVE-2018-16867", "CVE-2018-16872", "CVE-2018-19364", "CVE-2018-19489", "CVE-2018-20191", "CVE-2019-3812", "CVE-2019-6778"); script_xref(name:"FEDORA", value:"2019-88a98ce795"); script_name(english:"Fedora 29 : 2:qemu (2019-88a98ce795)"); script_summary(english:"Checks rpm output for the updated package."); script_set_attribute( attribute:"synopsis", value:"The remote Fedora host is missing a security update." ); script_set_attribute( attribute:"description", value: " - CVE-2018-19364: 9pfs: use-after-free (bz #1651359) - CVE-2018-19489: 9pfs: use-after-free renaming files (bz #1653157) - CVE-2018-16867: usb-mtp: path traversal issue (bz #1656746) - CVE-2018-16872: usb-mtp: path traversal issue (bz #1659150) - CVE-2018-20191: pvrdma: uar_read leads to NULL deref (bz #1660315) - CVE-2019-6778: slirp: heap buffer overflow (bz #1669072) - CVE-2019-3812: Out-of-bounds read in hw/i2c/i2c-ddc.c allows for memory disclosure (bz #1678081) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bodhi.fedoraproject.org/updates/FEDORA-2019-88a98ce795" ); script_set_attribute( attribute:"solution", value:"Update the affected 2:qemu package." ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-6778"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:fedoraproject:fedora:2:qemu"); script_set_attribute(attribute:"cpe", value:"cpe:/o:fedoraproject:fedora:29"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/12/12"); script_set_attribute(attribute:"patch_publication_date", value:"2019/03/25"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/26"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"Fedora Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/RedHat/release"); if (isnull(release) || "Fedora" >!< release) audit(AUDIT_OS_NOT, "Fedora"); os_ver = pregmatch(pattern: "Fedora.*release ([0-9]+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Fedora"); os_ver = os_ver[1]; if (! preg(pattern:"^29([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Fedora 29", "Fedora " + os_ver); if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Fedora", cpu); flag = 0; if (rpm_check(release:"FC29", reference:"qemu-3.0.0-4.fc29", epoch:"2")) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "2:qemu"); }
NASL family SuSE Local Security Checks NASL id SUSE_SU-2019-0489-1.NASL description This update for qemu fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). CVE-2018-7858: Fixed a denial of service which could occur while updating the VGA display, after guest has adjusted the display dimensions (bsc#1084604). CVE-2017-13673: Fixed a denial of service in the cpu_physical_memory_snapshot_get_dirty function. CVE-2017-13672: Fixed a denial of service via vectors involving display update. Non-security issues fixed: Fixed bad guest time after migration (bsc#1113231). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 122471 published 2019-02-27 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122471 title SUSE SLES12 Security Update : qemu (SUSE-SU-2019:0489-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from SUSE update advisory SUSE-SU-2019:0489-1. # The text itself is copyright (C) SUSE. # include("compat.inc"); if (description) { script_id(122471); script_version("1.4"); script_cvs_date("Date: 2020/02/07"); script_cve_id("CVE-2017-13672", "CVE-2017-13673", "CVE-2018-16872", "CVE-2018-19364", "CVE-2018-19489", "CVE-2018-7858", "CVE-2019-6778"); script_name(english:"SUSE SLES12 Security Update : qemu (SUSE-SU-2019:0489-1)"); script_summary(english:"Checks rpm output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote SUSE host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). CVE-2018-7858: Fixed a denial of service which could occur while updating the VGA display, after guest has adjusted the display dimensions (bsc#1084604). CVE-2017-13673: Fixed a denial of service in the cpu_physical_memory_snapshot_get_dirty function. CVE-2017-13672: Fixed a denial of service via vectors involving display update. Non-security issues fixed: Fixed bad guest time after migration (bsc#1113231). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1084604" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1113231" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123156" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-13672/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2017-13673/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-16872/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19364/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19489/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-7858/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-6778/" ); # https://www.suse.com/support/update/announcement/2019/suse-su-20190489-1/ script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?2d7d5bad" ); script_set_attribute( attribute:"solution", value: "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or 'zypper patch'. Alternatively you can run the command listed for your product : SUSE OpenStack Cloud 7:zypper in -t patch SUSE-OpenStack-Cloud-7-2019-489=1 SUSE Linux Enterprise Server for SAP 12-SP2:zypper in -t patch SUSE-SLE-SAP-12-SP2-2019-489=1 SUSE Linux Enterprise Server 12-SP2-LTSS:zypper in -t patch SUSE-SLE-SERVER-12-SP2-2019-489=1 SUSE Linux Enterprise Server 12-SP2-BCL:zypper in -t patch SUSE-SLE-SERVER-12-SP2-BCL-2019-489=1 SUSE Enterprise Storage 4:zypper in -t patch SUSE-Storage-4-2019-489=1" ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86-debuginfo"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12"); script_set_attribute(attribute:"vuln_publication_date", value:"2017/08/29"); script_set_attribute(attribute:"patch_publication_date", value:"2019/02/26"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/02/27"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE"); os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE"); os_ver = os_ver[1]; if (! preg(pattern:"^(SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES12", "SUSE " + os_ver); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu); sp = get_kb_item("Host/SuSE/patchlevel"); if (isnull(sp)) sp = "0"; if (os_ver == "SLES12" && (! preg(pattern:"^(2)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP2", os_ver + " SP" + sp); flag = 0; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-rbd-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-x86-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-curl-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-curl-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-rbd-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-ssh-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-block-ssh-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-debugsource-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-guest-agent-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-guest-agent-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-kvm-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-lang-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-tools-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-tools-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-x86-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"s390x", reference:"qemu-s390-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", cpu:"s390x", reference:"qemu-s390-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-block-curl-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-block-curl-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-block-ssh-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-block-ssh-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-debugsource-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-guest-agent-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-guest-agent-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-lang-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-tools-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-tools-debuginfo-2.6.2-41.49.1")) flag++; if (rpm_check(release:"SLES12", sp:"2", reference:"qemu-kvm-2.6.2-41.49.1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu"); }
NASL family SuSE Local Security Checks NASL id SUSE_SU-2019-0435-1.NASL description This update for qemu fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). CVE-2018-18954: Fixed a denial of service vulnerability related to PowerPC PowerNV memory operations (bsc#1114957). Non-security issues fixed: Improved disk performance for qemu on xen (bsc#1100408). Fixed xen offline migration (bsc#1079730, bsc#1101982, bsc#1063993). Fixed pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600). Use /bin/bash to echo value into sys fs for ksm control (bsc#1112646). Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 122341 published 2019-02-20 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/122341 title SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2019:0435-1) code # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from SUSE update advisory SUSE-SU-2019:0435-1. # The text itself is copyright (C) SUSE. # include("compat.inc"); if (description) { script_id(122341); script_version("1.4"); script_cvs_date("Date: 2020/02/10"); script_cve_id("CVE-2018-16872", "CVE-2018-18954", "CVE-2018-19364", "CVE-2018-19489", "CVE-2019-6778"); script_name(english:"SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2019:0435-1)"); script_summary(english:"Checks rpm output for the updated packages."); script_set_attribute( attribute:"synopsis", value:"The remote SUSE host is missing one or more security updates." ); script_set_attribute( attribute:"description", value: "This update for qemu fixes the following issues : Security issues fixed : CVE-2019-6778: Fixed a heap buffer overflow issue in the SLiRP networking implementation (bsc#1123156). CVE-2018-16872: Fixed a host security vulnerability related to handling symlinks in usb-mtp (bsc#1119493). CVE-2018-19489: Fixed a denial of service vulnerability in virtfs (bsc#1117275). CVE-2018-19364: Fixed a use-after-free if the virtfs interface resulting in a denial of service (bsc#1116717). CVE-2018-18954: Fixed a denial of service vulnerability related to PowerPC PowerNV memory operations (bsc#1114957). Non-security issues fixed: Improved disk performance for qemu on xen (bsc#1100408). Fixed xen offline migration (bsc#1079730, bsc#1101982, bsc#1063993). Fixed pwrite64/pread64/write to return 0 over -1 for a zero length NULL buffer in qemu (bsc#1121600). Use /bin/bash to echo value into sys fs for ksm control (bsc#1112646). Return specification exception for unimplemented diag 308 subcodes rather than a hardware error (bsc#1123179). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues." ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1063993" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1079730" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1100408" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1101982" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1112646" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1114957" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1116717" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1117275" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1119493" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1121600" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123156" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123179" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-16872/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-18954/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19364/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-19489/" ); script_set_attribute( attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-6778/" ); # https://www.suse.com/support/update/announcement/2019/suse-su-20190435-1/ script_set_attribute( attribute:"see_also", value:"http://www.nessus.org/u?7ba303e8" ); script_set_attribute( attribute:"solution", value: "To install this SUSE Security Update use the SUSE recommended installation methods like YaST online_update or 'zypper patch'. Alternatively you can run the command listed for your product : SUSE Linux Enterprise Server 12-SP4:zypper in -t patch SUSE-SLE-SERVER-12-SP4-2019-435=1 SUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch SUSE-SLE-DESKTOP-12-SP4-2019-435=1" ); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12"); script_set_attribute(attribute:"vuln_publication_date", value:"2018/11/15"); script_set_attribute(attribute:"patch_publication_date", value:"2019/02/19"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/02/20"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE"); os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release); if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE"); os_ver = os_ver[1]; if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu); sp = get_kb_item("Host/SuSE/patchlevel"); if (isnull(sp)) sp = "0"; if (os_ver == "SLES12" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP4", os_ver + " SP" + sp); if (os_ver == "SLED12" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP4", os_ver + " SP" + sp); flag = 0; if (rpm_check(release:"SLES12", sp:"4", cpu:"x86_64", reference:"qemu-block-rbd-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", cpu:"x86_64", reference:"qemu-x86-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", cpu:"s390x", reference:"qemu-s390-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", cpu:"s390x", reference:"qemu-s390-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-curl-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-curl-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-iscsi-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-iscsi-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-ssh-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-ssh-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-debugsource-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-guest-agent-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-guest-agent-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-lang-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-tools-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-tools-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-kvm-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-block-curl-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-block-curl-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-debugsource-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-kvm-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-tools-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-tools-debuginfo-2.11.2-5.8.1")) flag++; if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-x86-2.11.2-5.8.1")) flag++; if (flag) { if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get()); else security_warning(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu"); }
NASL family Huawei Local Security Checks NASL id EULEROS_SA-2019-1815.NASL description According to the versions of the qemu-kvm packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - A flaw was found in QEMU last seen 2020-05-03 modified 2019-08-27 plugin id 128184 published 2019-08-27 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/128184 title EulerOS 2.0 SP8 : qemu-kvm (EulerOS-SA-2019-1815) code # # (C) Tenable Network Security, Inc. # include("compat.inc"); if (description) { script_id(128184); script_version("1.3"); script_set_attribute(attribute:"plugin_modification_date", value:"2020/05/01"); script_cve_id( "CVE-2018-16867", "CVE-2018-16872", "CVE-2018-19364", "CVE-2018-19489", "CVE-2018-20191", "CVE-2019-3812", "CVE-2019-6778" ); script_name(english:"EulerOS 2.0 SP8 : qemu-kvm (EulerOS-SA-2019-1815)"); script_summary(english:"Checks the rpm output for the updated packages."); script_set_attribute(attribute:"synopsis", value: "The remote EulerOS host is missing multiple security updates."); script_set_attribute(attribute:"description", value: "According to the versions of the qemu-kvm packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - A flaw was found in QEMU's Media Transfer Protocol (MTP) where a path traversal in the in usb_mtp_write_data function in hw/usb/dev-mtp.c due to an improper file name sanitization. Reading and writing of arbitrary files is allowed when a guest device is mounted which may lead to a denial of service scenario or possibly lead to code execution on the host.(CVE-2018-16867) - A flaw was found in QEMU's Media Transfer Protocol (MTP). The code opening files in usb_mtp_get_object and usb_mtp_get_partial_object and directories in usb_mtp_object_readdir doesn't consider that the underlying filesystem may have changed since the time lstat(2) was called in usb_mtp_object_alloc, a classical TOCTTOU problem. An attacker with write access to the host filesystem, shared with a guest, can use this property to navigate the host filesystem in the context of the QEMU process and read any file the QEMU process has access to. Access to the filesystem may be local or via a network share protocol such as CIFS.(CVE-2018-16872) - hw/9pfs/cofile.c and hw/9pfs/9p.c in QEMU can modify an fid path while it is being accessed by a second thread, leading to (for example) a use-after-free outcome.(CVE-2018-19364) - v9fs_wstat in hw/9pfs/9p.c in QEMU allows guest OS users to cause a denial of service (crash) because of a race condition during file renaming.(CVE-2018-19489) - hw/rdma/vmw/pvrdma_main.c in QEMU does not implement a read operation (such as uar_read by analogy to uar_write), which allows attackers to cause a denial of service (NULL pointer dereference).(CVE-2018-20191) - QEMU, through version 2.10 and through version 3.1.0, is vulnerable to an out-of-bounds read of up to 128 bytes in the hw/i2c/i2c-ddc.c:i2c_ddc() function. A local attacker with permission to execute i2c commands could exploit this to read stack memory of the qemu process on the host.(CVE-2019-3812) - In QEMU 3.0.0, tcp_emu in slirp/tcp_subr.c has a heap-based buffer overflow.(CVE-2019-6778) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues."); # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2019-1815 script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?9661b617"); script_set_attribute(attribute:"solution", value: "Update the affected qemu-kvm packages."); script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-6778"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"patch_publication_date", value:"2019/08/28"); script_set_attribute(attribute:"plugin_publication_date", value:"2019/08/27"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-audio-alsa"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-audio-oss"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-audio-pa"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-audio-sdl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-curl"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-dmg"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-gluster"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-iscsi"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-nfs"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-rbd"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-block-ssh"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-common"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-img"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-kvm"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-system-aarch64"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-system-aarch64-core"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-ui-curses"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-ui-gtk"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:qemu-ui-sdl"); script_set_attribute(attribute:"cpe", value:"cpe:/o:huawei:euleros:2.0"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_family(english:"Huawei Local Security Checks"); script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/EulerOS/release", "Host/EulerOS/rpm-list", "Host/EulerOS/sp"); script_exclude_keys("Host/EulerOS/uvp_version"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/EulerOS/release"); if (isnull(release) || release !~ "^EulerOS") audit(AUDIT_OS_NOT, "EulerOS"); if (release !~ "^EulerOS release 2\.0(\D|$)") audit(AUDIT_OS_NOT, "EulerOS 2.0"); sp = get_kb_item("Host/EulerOS/sp"); if (isnull(sp) || sp !~ "^(8)$") audit(AUDIT_OS_NOT, "EulerOS 2.0 SP8"); uvp = get_kb_item("Host/EulerOS/uvp_version"); if (!empty_or_null(uvp)) audit(AUDIT_OS_NOT, "EulerOS 2.0 SP8", "EulerOS UVP " + uvp); if (!get_kb_item("Host/EulerOS/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "aarch64" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "EulerOS", cpu); if ("aarch64" >!< cpu) audit(AUDIT_ARCH_NOT, "aarch64", cpu); flag = 0; pkgs = ["qemu-audio-alsa-3.0.0-4.h1.eulerosv2r8", "qemu-audio-oss-3.0.0-4.h1.eulerosv2r8", "qemu-audio-pa-3.0.0-4.h1.eulerosv2r8", "qemu-audio-sdl-3.0.0-4.h1.eulerosv2r8", "qemu-block-curl-3.0.0-4.h1.eulerosv2r8", "qemu-block-dmg-3.0.0-4.h1.eulerosv2r8", "qemu-block-gluster-3.0.0-4.h1.eulerosv2r8", "qemu-block-iscsi-3.0.0-4.h1.eulerosv2r8", "qemu-block-nfs-3.0.0-4.h1.eulerosv2r8", "qemu-block-rbd-3.0.0-4.h1.eulerosv2r8", "qemu-block-ssh-3.0.0-4.h1.eulerosv2r8", "qemu-common-3.0.0-4.h1.eulerosv2r8", "qemu-img-3.0.0-4.h1.eulerosv2r8", "qemu-kvm-3.0.0-4.h1.eulerosv2r8", "qemu-system-aarch64-3.0.0-4.h1.eulerosv2r8", "qemu-system-aarch64-core-3.0.0-4.h1.eulerosv2r8", "qemu-ui-curses-3.0.0-4.h1.eulerosv2r8", "qemu-ui-gtk-3.0.0-4.h1.eulerosv2r8", "qemu-ui-sdl-3.0.0-4.h1.eulerosv2r8"]; foreach (pkg in pkgs) if (rpm_check(release:"EulerOS-2.0", sp:"8", reference:pkg)) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_WARNING, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-kvm"); }
References
- https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2018-16872
- http://www.securityfocus.com/bid/106212
- https://lists.debian.org/debian-lts-announce/2019/02/msg00041.html
- https://usn.ubuntu.com/3923-1/
- http://lists.opensuse.org/opensuse-security-announce/2019-03/msg00042.html
- https://www.debian.org/security/2019/dsa-4454
- https://seclists.org/bugtraq/2019/May/76
- https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/KJMTVGDLA654HNCDGLCUEIP36SNJEKK7/
- https://lists.fedoraproject.org/archives/list/package-announce%40lists.fedoraproject.org/message/CGCFIFSIWUREEQQOZDZFBYKWZHXCWBZN/