Vulnerabilities > CVE-2017-9350 - Allocation of Resources Without Limits or Throttling vulnerability in Wireshark

047910
CVSS 7.5 - HIGH
Attack vector
NETWORK
Attack complexity
LOW
Privileges required
NONE
Confidentiality impact
NONE
Integrity impact
NONE
Availability impact
HIGH
network
low complexity
wireshark
CWE-770
nessus
NVD
Published: 2017-06-02
Updated: 2024-11-21

Summary

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the openSAFETY dissector could crash or exhaust system memory. This was addressed in epan/dissectors/packet-opensafety.c by checking for a negative length.

Vulnerable Configurations

Part Description Count
Application
Wireshark
20

Common Weakness Enumeration (CWE)

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Locate and Exploit Test APIs
    An attacker exploits a sample, demonstration, or test API that is insecure by default and should not be resident on production systems. Some applications include APIs that are intended to allow an administrator to test and refine their domain. These APIs should usually be disabled once a system enters a production environment. Testing APIs may expose a great deal of diagnostic information intended to aid an administrator, but which can also be used by an attacker to further refine their attack. Moreover, testing APIs may not have adequate security controls or may not have undergone rigorous testing since they were not intended for use in production environments. As such, they may have many flaws and vulnerabilities that would allow an attacker to severely disrupt a target.
  • Flooding
    An attacker consumes the resources of a target by rapidly engaging in a large number of interactions with the target. This type of attack generally exposes a weakness in rate limiting or flow control in management of interactions. Since each request consumes some of the target's resources, if a sufficiently large number of requests must be processed at the same time then the target's resources can be exhausted. The degree to which the attack is successful depends upon the volume of requests in relation to the amount of the resource the target has access to, and other mitigating circumstances such as the target's ability to shift load or acquired additional resources to deal with the depletion. The more protected the resource and the greater the quantity of it that must be consumed, the more resources the attacker may need to have at their disposal. A typical TCP/IP flooding attack is a Distributed Denial-of-Service attack where many machines simultaneously make a large number of requests to a target. Against a target with strong defenses and a large pool of resources, many tens of thousands of attacking machines may be required. When successful this attack prevents legitimate users from accessing the service and can cause the target to crash. This attack differs from resource depletion through leaks or allocations in that the latter attacks do not rely on the volume of requests made to the target but instead focus on manipulation of the target's operations. The key factor in a flooding attack is the number of requests the attacker can make in a given period of time. The greater this number, the more likely an attack is to succeed against a given target.
  • Excessive Allocation
    An attacker causes the target to allocate excessive resources to servicing the attackers' request, thereby reducing the resources available for legitimate services and degrading or denying services. Usually, this attack focuses on memory allocation, but any finite resource on the target could be the attacked, including bandwidth, processing cycles, or other resources. This attack does not attempt to force this allocation through a large number of requests (that would be Resource Depletion through Flooding) but instead uses one or a small number of requests that are carefully formatted to force the target to allocate excessive resources to service this request(s). Often this attack takes advantage of a bug in the target to cause the target to allocate resources vastly beyond what would be needed for a normal request. For example, using an Integer Attack, the attacker could cause a variable that controls allocation for a request to hold an excessively large value. Excessive allocation of resources can render a service degraded or unavailable to legitimate users and can even lead to crashing of the target.
  • XML Ping of the Death
    An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.
  • XML Entity Expansion
    An attacker submits an XML document to a target application where the XML document uses nested entity expansion to produce an excessively large output XML. XML allows the definition of macro-like structures that can be used to simplify the creation of complex structures. However, this capability can be abused to create excessive demands on a processor's CPU and memory. A small number of nested expansions can result in an exponential growth in demands on memory.

Nessus

  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2017-1663-1.NASL
    descriptionThe network debugging tool wireshark was updated to version 2.2.7 to fix the following issues : - CVE-2017-9352: Bazaar dissector infinite loop (wnpa-sec-2017-22) (bsc#1042304) - CVE-2017-9348: DOF dissector read overflow (wnpa-sec-2017-23) (bsc#1042303) - CVE-2017-9351: DHCP dissector read overflow (wnpa-sec-2017-24) (bsc#1042302) - CVE-2017-9346: SoulSeek dissector infinite loop (wnpa-sec-2017-25) (bsc#1042301) - CVE-2017-9345: DNS dissector infinite loop (wnpa-sec-2017-26) (bsc#1042300) - CVE-2017-9349: DICOM dissector infinite loop (wnpa-sec-2017-27) (bsc#1042305) - CVE-2017-9350: openSAFETY dissector memory exh.. (wnpa-sec-2017-28) (bsc#1042299) - CVE-2017-9344: BT L2CAP dissector divide by zero (wnpa-sec-2017-29) (bsc#1042298) - CVE-2017-9343: MSNIP dissector crash (wnpa-sec-2017-30) (bsc#1042309) - CVE-2017-9347: ROS dissector crash (wnpa-sec-2017-31) (bsc#1042308) - CVE-2017-9354: RGMP dissector crash (wnpa-sec-2017-32) (bsc#1042307) - CVE-2017-9353: wireshark: IPv6 dissector crash (wnpa-sec-2017-33) (bsc#1042306) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id101042
    published2017-06-26
    reporterThis script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/101042
    titleSUSE SLED12 / SLES12 Security Update : wireshark (SUSE-SU-2017:1663-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from SUSE update advisory SUSE-SU-2017:1663-1.
# The text itself is copyright (C) SUSE.
#

include("compat.inc");

if (description)
{
  script_id(101042);
  script_version("3.9");
  script_cvs_date("Date: 2019/09/11 11:22:15");

  script_cve_id("CVE-2017-9343", "CVE-2017-9344", "CVE-2017-9345", "CVE-2017-9346", "CVE-2017-9347", "CVE-2017-9348", "CVE-2017-9349", "CVE-2017-9350", "CVE-2017-9351", "CVE-2017-9352", "CVE-2017-9353", "CVE-2017-9354");

  script_name(english:"SUSE SLED12 / SLES12 Security Update : wireshark (SUSE-SU-2017:1663-1)");
  script_summary(english:"Checks rpm output for the updated packages.");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote SUSE host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"The network debugging tool wireshark was updated to version 2.2.7 to
fix the following issues :

  - CVE-2017-9352: Bazaar dissector infinite loop
    (wnpa-sec-2017-22) (bsc#1042304)

  - CVE-2017-9348: DOF dissector read overflow
    (wnpa-sec-2017-23) (bsc#1042303)

  - CVE-2017-9351: DHCP dissector read overflow
    (wnpa-sec-2017-24) (bsc#1042302)

  - CVE-2017-9346: SoulSeek dissector infinite loop
    (wnpa-sec-2017-25) (bsc#1042301)

  - CVE-2017-9345: DNS dissector infinite loop
    (wnpa-sec-2017-26) (bsc#1042300)

  - CVE-2017-9349: DICOM dissector infinite loop
    (wnpa-sec-2017-27) (bsc#1042305)

  - CVE-2017-9350: openSAFETY dissector memory exh..
    (wnpa-sec-2017-28) (bsc#1042299)

  - CVE-2017-9344: BT L2CAP dissector divide by zero
    (wnpa-sec-2017-29) (bsc#1042298)

  - CVE-2017-9343: MSNIP dissector crash (wnpa-sec-2017-30)
    (bsc#1042309)

  - CVE-2017-9347: ROS dissector crash (wnpa-sec-2017-31)
    (bsc#1042308)

  - CVE-2017-9354: RGMP dissector crash (wnpa-sec-2017-32)
    (bsc#1042307)

  - CVE-2017-9353: wireshark: IPv6 dissector crash
    (wnpa-sec-2017-33) (bsc#1042306)

Note that Tenable Network Security has extracted the preceding
description block directly from the SUSE security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042298"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042299"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042300"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042301"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042302"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042303"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042304"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042305"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042306"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042307"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042308"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1042309"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9343/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9344/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9345/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9346/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9347/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9348/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9349/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9350/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9351/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9352/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9353/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2017-9354/"
  );
  # https://www.suse.com/support/update/announcement/2017/suse-su-20171663-1/
  script_set_attribute(
    attribute:"see_also",
    value:"http://www.nessus.org/u?ec52156b"
  );
  script_set_attribute(
    attribute:"solution", 
    value:
"To install this SUSE Security Update use YaST online_update.
Alternatively you can run the command listed for your product :

SUSE Linux Enterprise Software Development Kit 12-SP2:zypper in -t
patch SUSE-SLE-SDK-12-SP2-2017-1031=1

SUSE Linux Enterprise Server for Raspberry Pi 12-SP2:zypper in -t
patch SUSE-SLE-RPI-12-SP2-2017-1031=1

SUSE Linux Enterprise Server 12-SP2:zypper in -t patch
SUSE-SLE-SERVER-12-SP2-2017-1031=1

SUSE Linux Enterprise Desktop 12-SP2:zypper in -t patch
SUSE-SLE-DESKTOP-12-SP2-2017-1031=1

To bring your system up-to-date, use 'zypper patch'."
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:N/I:N/A:C");
  script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"true");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwireshark8");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwireshark8-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwiretap6");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwiretap6-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwscodecs1");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwscodecs1-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwsutil7");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libwsutil7-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:wireshark");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:wireshark-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:wireshark-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:wireshark-gtk");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:wireshark-gtk-debuginfo");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");

  script_set_attribute(attribute:"vuln_publication_date", value:"2017/06/02");
  script_set_attribute(attribute:"patch_publication_date", value:"2017/06/23");
  script_set_attribute(attribute:"plugin_publication_date", value:"2017/06/26");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
os_ver = os_ver[1];
if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver);

if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
if (cpu >!< "x86_64") audit(AUDIT_ARCH_NOT, "x86_64", cpu);


sp = get_kb_item("Host/SuSE/patchlevel");
if (isnull(sp)) sp = "0";
if (os_ver == "SLES12" && (! preg(pattern:"^(2)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP2", os_ver + " SP" + sp);
if (os_ver == "SLED12" && (! preg(pattern:"^(2)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP2", os_ver + " SP" + sp);


flag = 0;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwireshark8-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwireshark8-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwiretap6-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwiretap6-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwscodecs1-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwscodecs1-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwsutil7-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"libwsutil7-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"wireshark-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"wireshark-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"wireshark-debugsource-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"wireshark-gtk-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"wireshark-gtk-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwireshark8-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwireshark8-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwiretap6-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwiretap6-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwscodecs1-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwscodecs1-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwsutil7-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"libwsutil7-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"wireshark-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"wireshark-debuginfo-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"wireshark-debugsource-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"wireshark-gtk-2.2.7-47.1")) flag++;
if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"wireshark-gtk-debuginfo-2.2.7-47.1")) flag++;


if (flag)
{
  if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
  else security_hole(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "wireshark");
}
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2017-1664-1.NASL
    descriptionThe network analysis tool wireshark was updated to version 2.0.13 to fix the following issues : - CVE-2017-9352: Bazaar dissector infinite loop (wnpa-sec-2017-22) (bsc#1042304) - CVE-2017-9348: DOF dissector read overflow (wnpa-sec-2017-23) (bsc#1042303) - CVE-2017-9351: DHCP dissector read overflow (wnpa-sec-2017-24) (bsc#1042302) - CVE-2017-9346: SoulSeek dissector infinite loop (wnpa-sec-2017-25) (bsc#1042301) - CVE-2017-9345: DNS dissector infinite loop (wnpa-sec-2017-26) (bsc#1042300) - CVE-2017-9349: DICOM dissector infinite loop (wnpa-sec-2017-27) (bsc#1042305) - CVE-2017-9350: openSAFETY dissector memory exh.. (wnpa-sec-2017-28) (bsc#1042299) - CVE-2017-9344: BT L2CAP dissector divide by zero (wnpa-sec-2017-29) (bsc#1042298) - CVE-2017-9343: MSNIP dissector crash (wnpa-sec-2017-30) (bsc#1042309) - CVE-2017-9347: ROS dissector crash (wnpa-sec-2017-31) (bsc#1042308) - CVE-2017-9354: RGMP dissector crash (wnpa-sec-2017-32) (bsc#1042307) - CVE-2017-9353: wireshark: IPv6 dissector crash (wnpa-sec-2017-33) (bsc#1042306) Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id101043
    published2017-06-26
    reporterThis script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/101043
    titleSUSE SLES11 Security Update : wireshark (SUSE-SU-2017:1664-1)
  • NASL familyMacOS X Local Security Checks
    NASL idMACOSX_WIRESHARK_2_2_7.NASL
    descriptionThe version of Wireshark installed on the remote macOS or Mac OS X host is 2.0.x prior to 2.0.13 or 2.2.x prior to 2.2.7. It is, therefore, affected by multiple denial of service vulnerabilities : - A NULL pointer dereference flaw exists in the dissect_msnip() function within file epan/dissectors/packet-msnip.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9343) - A divide-by-zero error exists in the dissect_connparamrequest() function within file epan/dissectors/packet-btl2cap.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9344) - An infinite loop condition exists in the expand_dns_name() function within file epan/dissectors/packet-dns.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9345) - An infinite loop condition exists in the dissect_slsk_pdu() function within file epan/dissectors/packet-slsk.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9346) - A NULL pointer dereference flaw exists in the ros_try_string() function within file epan/dissectors/asn1/ros/packet-ros-template.c due to improper validation of user-supplied input passed as an OID string. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. This issue only affects version 2.2.x. (CVE-2017-9347) - An out-of-bounds read error exists in the OALMarshal_UncompressValue() function within file epan/dissectors/packet-dof.c when handling Distributed Object Framework (DOF) packets. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. This issue only affects version 2.2.x. (CVE-2017-9348) - An infinite loop condition exists in the dissect_dcm_pdu_data() function within file epan/dissectors/packet-dcm.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9349) - A memory allocation issue exists in the dissect_opensafety_ssdo_message() function within file epan/dissectors/packet-opensafety.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9350) - An out-of-bounds read error exists in the bootp_option() function within file epan/dissectors/packet-bootp.c when handling vendor class identifier strings in bootp packets due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9351) - An infinite loop condition exists in the get_bzr_pdu_len() function within file epan/dissectors/packet-bzr.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9352) - A NULL pointer dereference flaw exists in the dissect_routing6_rpl() function within file epan/dissectors/packet-ipv6.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. This issue only affects version 2.2.x. (CVE-2017-9353) - A NULL pointer dereference flaw exists in the dissect_rgmp() function within file epan/dissectors/packet-rgmp.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9354) Note that Nessus has not tested for these issues but has instead relied only on the application
    last seen2020-06-01
    modified2020-06-02
    plugin id100670
    published2017-06-07
    reporterThis script is Copyright (C) 2017-2018 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/100670
    titleWireshark 2.0.x < 2.0.13 / 2.2.x < 2.2.7 Multiple DoS (macOS)
  • NASL familyWindows
    NASL idWIRESHARK_2_2_7.NASL
    descriptionThe version of Wireshark installed on the remote Windows host is 2.0.x prior to 2.0.13 or 2.2.x prior to 2.2.7. It is, therefore, affected by multiple denial of service vulnerabilities : - A NULL pointer dereference flaw exists in the dissect_msnip() function within file epan/dissectors/packet-msnip.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9343) - A divide-by-zero error exists in the dissect_connparamrequest() function within file epan/dissectors/packet-btl2cap.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9344) - An infinite loop condition exists in the expand_dns_name() function within file epan/dissectors/packet-dns.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9345) - An infinite loop condition exists in the dissect_slsk_pdu() function within file epan/dissectors/packet-slsk.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9346) - A NULL pointer dereference flaw exists in the ros_try_string() function within file epan/dissectors/asn1/ros/packet-ros-template.c due to improper validation of user-supplied input passed as an OID string. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. This issue only affects version 2.2.x. (CVE-2017-9347) - An out-of-bounds read error exists in the OALMarshal_UncompressValue() function within file epan/dissectors/packet-dof.c when handling Distributed Object Framework (DOF) packets. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. This issue only affects version 2.2.x. (CVE-2017-9348) - An infinite loop condition exists in the dissect_dcm_pdu_data() function within file epan/dissectors/packet-dcm.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9349) - A memory allocation issue exists in the dissect_opensafety_ssdo_message() function within file epan/dissectors/packet-opensafety.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9350) - An out-of-bounds read error exists in the bootp_option() function within file epan/dissectors/packet-bootp.c when handling vendor class identifier strings in bootp packets due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9351) - An infinite loop condition exists in the get_bzr_pdu_len() function within file epan/dissectors/packet-bzr.c when handling packets or packet trace files. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to consume excessive CPU resources, resulting in a denial of service condition. (CVE-2017-9352) - A NULL pointer dereference flaw exists in the dissect_routing6_rpl() function within file epan/dissectors/packet-ipv6.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. This issue only affects version 2.2.x. (CVE-2017-9353) - A NULL pointer dereference flaw exists in the dissect_rgmp() function within file epan/dissectors/packet-rgmp.c due to improper validation of user-supplied input. An unauthenticated, remote attacker can exploit this, via a specially crafted packet or packet trace file, to cause a denial of service condition. (CVE-2017-9354) Note that Nessus has not tested for these issues but has instead relied only on the application
    last seen2020-06-01
    modified2020-06-02
    plugin id100671
    published2017-06-07
    reporterThis script is Copyright (C) 2017-2018 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/100671
    titleWireshark 2.0.x < 2.0.13 / 2.2.x < 2.2.7 Multiple DoS
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2017-674.NASL
    descriptionThis update for wireshark fixes minor vulnerabilities that could be used to trigger dissector crashes, infinite loops, or cause excessive use of CPU resources by making Wireshark read specially crafted packages from the network or a capture file : - CVE-2017-9352: Bazaar dissector infinite loop (boo#1042304) - CVE-2017-9348: DOF dissector read overflow (boo#1042303) - CVE-2017-9351: DHCP dissector read overflow (boo#1042302) - CVE-2017-9346: SoulSeek dissector infinite loop (boo#1042301) - CVE-2017-9345: DNS dissector infinite loop (boo#1042300) - CVE-2017-9349: DICOM dissector infinite loop (boo#1042305) - CVE-2017-9350: openSAFETY dissector memory exhaustion (boo#1042299) - CVE-2017-9344: BT L2CAP dissector divide by zero (boo#1042298) - CVE-2017-9343: MSNIP dissector crash (boo#1042309) - CVE-2017-9347: ROS dissector crash (boo#1042308) - CVE-2017-9354: RGMP dissector crash (boo#1042307) - CVE-2017-9353: IPv6 dissector crash (boo#1042306)
    last seen2020-06-05
    modified2017-06-13
    plugin id100752
    published2017-06-13
    reporterThis script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/100752
    titleopenSUSE Security Update : wireshark (openSUSE-2017-674)
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2017-840.NASL
    descriptionThis update to Wireshark 2.2.8 fixes some minor vulnerabilities could be used to trigger dissector crashes, infinite loops, or cause excessive use of memory resources by making Wireshark read specially crafted packages from the network or a capture file : - CVE-2017-7702,CVE-2017-11410: WBMXL dissector infinite loop (wnpa-sec-2017-13) - CVE-2017-9350,CVE-2017-11411: openSAFETY dissector memory exhaustion (wnpa-sec-2017-28) - CVE-2017-11408: AMQP dissector crash (wnpa-sec-2017-34) - CVE-2017-11407: MQ dissector crash (wnpa-sec-2017-35) - CVE-2017-11406: DOCSIS infinite loop (wnpa-sec-2017-36)
    last seen2020-06-05
    modified2017-07-26
    plugin id101970
    published2017-07-26
    reporterThis script is Copyright (C) 2017-2020 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/101970
    titleopenSUSE Security Update : Wireshark (openSUSE-2017-840)

References