Vulnerabilities > CVE-2017-7975 - Integer Overflow or Wraparound vulnerability in Artifex Jbig2Dec 0.13
Attack vector
LOCAL Attack complexity
LOW Privileges required
NONE Confidentiality impact
HIGH Integrity impact
HIGH Availability impact
HIGH Summary
Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.
Vulnerable Configurations
Part | Description | Count |
---|---|---|
Application | 1 |
Common Weakness Enumeration (CWE)
Common Attack Pattern Enumeration and Classification (CAPEC)
- Forced Integer Overflow This attack forces an integer variable to go out of range. The integer variable is often used as an offset such as size of memory allocation or similarly. The attacker would typically control the value of such variable and try to get it out of range. For instance the integer in question is incremented past the maximum possible value, it may wrap to become a very small, or negative number, therefore providing a very incorrect value which can lead to unexpected behavior. At worst the attacker can execute arbitrary code.
Nessus
NASL family Huawei Local Security Checks NASL id EULEROS_SA-2020-1499.NASL description According to the versions of the ghostscript package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities : - The PS Interpreter in Ghostscript 9.18 and 9.20 allows remote attackers to execute arbitrary code via crafted userparams.(CVE-2016-7976) - psi/zfile.c in Artifex Ghostscript before 9.21rc1 permits the status command even if -dSAFER is used, which might allow remote attackers to determine the existence and size of arbitrary files, a similar issue to CVE-2016-7977.(CVE-2018-11645) - A flaw was found in the .pdfexectoken and other procedures where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14817) - A flaw was found in the setsystemparams procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14813) - A flaw was found in the .setuserparams2 procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14812) - A flaw was found in the .pdf_hook_DSC_Creator procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14811) - libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file.(CVE-2017-9216) - Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.(CVE-2017-7975) - Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file.(CVE-2017-7885) - Artifex jbig2dec 0.13 allows out-of-bounds writes and reads because of an integer overflow in the jbig2_image_compose function in jbig2_image.c during operations on a crafted .jb2 file, leading to a denial of service (application crash) or disclosure of sensitive information from process memory.(CVE-2017-7976) - ghostscript before version 9.21 is vulnerable to a heap based buffer overflow that was found in the ghostscript jbig2_decode_gray_scale_image function which is used to decode halftone segments in a JBIG2 image. A document (PostScript or PDF) with an embedded, specially crafted, jbig2 image could trigger a segmentation fault in ghostscript.(CVE-2016-9601) - In Artifex Ghostscript before 9.26, a carefully crafted PDF file can trigger an extremely long running computation when parsing the file.(CVE-2018-19478) - It was found that the .buildfont1 procedure did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. An attacker could abuse this flaw by creating a specially crafted PostScript file that could escalate privileges and access files outside of restricted areas.(CVE-2019-10216) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-04-30 modified 2020-04-16 plugin id 135661 published 2020-04-16 reporter This script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/135661 title EulerOS Virtualization 3.0.2.2 : ghostscript (EulerOS-SA-2020-1499) code # # (C) Tenable Network Security, Inc. # include("compat.inc"); if (description) { script_id(135661); script_version("1.2"); script_set_attribute(attribute:"plugin_modification_date", value:"2020/04/24"); script_cve_id( "CVE-2016-7976", "CVE-2016-9601", "CVE-2017-7885", "CVE-2017-7975", "CVE-2017-7976", "CVE-2017-9216", "CVE-2018-11645", "CVE-2018-19478", "CVE-2019-10216", "CVE-2019-14811", "CVE-2019-14812", "CVE-2019-14813", "CVE-2019-14817" ); script_name(english:"EulerOS Virtualization 3.0.2.2 : ghostscript (EulerOS-SA-2020-1499)"); script_summary(english:"Checks the rpm output for the updated packages."); script_set_attribute(attribute:"synopsis", value: "The remote EulerOS Virtualization host is missing multiple security updates."); script_set_attribute(attribute:"description", value: "According to the versions of the ghostscript package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities : - The PS Interpreter in Ghostscript 9.18 and 9.20 allows remote attackers to execute arbitrary code via crafted userparams.(CVE-2016-7976) - psi/zfile.c in Artifex Ghostscript before 9.21rc1 permits the status command even if -dSAFER is used, which might allow remote attackers to determine the existence and size of arbitrary files, a similar issue to CVE-2016-7977.(CVE-2018-11645) - A flaw was found in the .pdfexectoken and other procedures where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14817) - A flaw was found in the setsystemparams procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14813) - A flaw was found in the .setuserparams2 procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14812) - A flaw was found in the .pdf_hook_DSC_Creator procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14811) - libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file.(CVE-2017-9216) - Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.(CVE-2017-7975) - Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file.(CVE-2017-7885) - Artifex jbig2dec 0.13 allows out-of-bounds writes and reads because of an integer overflow in the jbig2_image_compose function in jbig2_image.c during operations on a crafted .jb2 file, leading to a denial of service (application crash) or disclosure of sensitive information from process memory.(CVE-2017-7976) - ghostscript before version 9.21 is vulnerable to a heap based buffer overflow that was found in the ghostscript jbig2_decode_gray_scale_image function which is used to decode halftone segments in a JBIG2 image. A document (PostScript or PDF) with an embedded, specially crafted, jbig2 image could trigger a segmentation fault in ghostscript.(CVE-2016-9601) - In Artifex Ghostscript before 9.26, a carefully crafted PDF file can trigger an extremely long running computation when parsing the file.(CVE-2018-19478) - It was found that the .buildfont1 procedure did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. An attacker could abuse this flaw by creating a specially crafted PostScript file that could escalate privileges and access files outside of restricted areas.(CVE-2019-10216) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues."); # https://developer.huaweicloud.com/ict/en/site-euleros/euleros/security-advisories/EulerOS-SA-2020-1499 script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?ce7df4f5"); script_set_attribute(attribute:"solution", value: "Update the affected ghostscript packages."); script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C"); script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"); script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C"); script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available"); script_set_attribute(attribute:"patch_publication_date", value:"2020/04/16"); script_set_attribute(attribute:"plugin_publication_date", value:"2020/04/16"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:huawei:euleros:ghostscript"); script_set_attribute(attribute:"cpe", value:"cpe:/o:huawei:euleros:uvp:3.0.2.2"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_family(english:"Huawei Local Security Checks"); script_copyright(english:"This script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/EulerOS/release", "Host/EulerOS/rpm-list", "Host/EulerOS/uvp_version"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/EulerOS/release"); if (isnull(release) || release !~ "^EulerOS") audit(AUDIT_OS_NOT, "EulerOS"); uvp = get_kb_item("Host/EulerOS/uvp_version"); if (uvp != "3.0.2.2") audit(AUDIT_OS_NOT, "EulerOS Virtualization 3.0.2.2"); if (!get_kb_item("Host/EulerOS/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); cpu = get_kb_item("Host/cpu"); if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "aarch64" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "EulerOS", cpu); if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_ARCH_NOT, "i686 / x86_64", cpu); flag = 0; pkgs = ["ghostscript-9.07-31.6.h13.eulerosv2r7"]; foreach (pkg in pkgs) if (rpm_check(release:"EulerOS-2.0", reference:pkg)) flag++; if (flag) { security_report_v4( port : 0, severity : SECURITY_HOLE, extra : rpm_report_get() ); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "ghostscript"); }
NASL family Fedora Local Security Checks NASL id FEDORA_2017-FAE1506F94.NASL description Security fixes release for these CVEs : - [CVE-2016-10217](https://access.redhat.com/security/cve/ CVE-2016-10217) *(use-after-free and application crash)* - [CVE-2016-10218](https://access.redhat.com/security/cve/ CVE-2016-10218) *(NULL pointer dereference and application crash)* - [CVE-2016-10219](https://access.redhat.com/security/cve/ CVE-2016-10219) *(divide-by-zero error and application crash)* - [CVE-2016-10220](https://access.redhat.com/security/cve/ CVE-2016-10220) *(NULL pointer dereference and application crash)* - [CVE-2017-5951](https://access.redhat.com/security/cve/C VE-2017-5951) *(NULL pointer dereference and application crash)* - [CVE-2017-7975](https://access.redhat.com/security/cve/C VE-2017-7975) *(application crash or possible execution of arbitrary code)* - [CVE-2017-8291](https://access.redhat.com/security/cve/C VE-2017-8291) *( -dSAFER bypass and remote command execution)* Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-05-16 plugin id 100201 published 2017-05-16 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100201 title Fedora 24 : ghostscript (2017-fae1506f94) NASL family Huawei Local Security Checks NASL id EULEROS_SA-2019-2370.NASL description According to the versions of the ghostscript packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - In Artifex Ghostscript before 9.26, a carefully crafted PDF file can trigger an extremely long running computation when parsing the file.(CVE-2018-19478) - The gs_makewordimagedevice function in base/gsdevmem.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted file that is mishandled in the PDF Transparency module.(CVE-2016-10220) - Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file.(CVE-2017-7885) - Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.(CVE-2017-7975) - psi/ztoken.c in Artifex Ghostscript 9.21 mishandles references to the scanner state structure, which allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted PostScript document, related to an out-of-bounds read in the igc_reloc_struct_ptr function in psi/igc.c.(CVE-2017-11714) - The gs_alloc_ref_array function in psi/ialloc.c in Artifex Ghostscript 9.21 allows remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted PostScript document. This is related to a lack of an integer overflow check in base/gsalloc.c.(CVE-2017-9835) - The pdf14_pop_transparency_group function in base/gdevp14.c in the PDF Transparency module in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted file.(CVE-2016-10218) - The fill_threshhold_buffer function in base/gxht_thresh.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted PostScript document.(CVE-2016-10317) - The pdf14_open function in base/gdevp14.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (use-after-free and application crash) via a crafted file that is mishandled in the color management module.(CVE-2016-10217) - The intersect function in base/gxfill.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (divide-by-zero error and application crash) via a crafted file.(CVE-2016-10219) - The mem_get_bits_rectangle function in base/gdevmem.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted file.(CVE-2017-5951) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-05-08 modified 2019-12-10 plugin id 131862 published 2019-12-10 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/131862 title EulerOS 2.0 SP2 : ghostscript (EulerOS-SA-2019-2370) NASL family Debian Local Security Checks NASL id DEBIAN_DSA-3855.NASL description Multiple security issues have been found in the JBIG2 decoder library, which may lead to denial of service, disclosure of sensitive information from process memory or the execution of arbitrary code if a malformed image file (usually embedded in a PDF document) is opened. last seen 2020-06-01 modified 2020-06-02 plugin id 100277 published 2017-05-19 reporter This script is Copyright (C) 2017-2018 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100277 title Debian DSA-3855-1 : jbig2dec - security update NASL family Ubuntu Local Security Checks NASL id UBUNTU_USN-3297-1.NASL description Bingchang Liu discovered that jbig2dec incorrectly handled memory when decoding malformed image files. If a user or automated system were tricked into processing a specially crafted JBIG2 image file, a remote attacker could cause jbig2dec to crash, resulting in a denial of service, or possibly execute arbitrary code. This issue only applied to Ubuntu 14.04 LTS, Ubuntu 16.04 LTS and Ubuntu 16.10. (CVE-2016-9601) It was discovered that jbig2dec incorrectly handled memory when decoding malformed image files. If a user or automated system were tricked into processing a specially crafted JBIG2 image file, a remote attacker could cause jbig2dec to crash, resulting in a denial of service, or possibly disclose sensitive information. (CVE-2017-7885) Jiaqi Peng discovered that jbig2dec incorrectly handled memory when decoding malformed image files. If a user or automated system were tricked into processing a specially crafted JBIG2 image file, a remote attacker could cause jbig2dec to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2017-7975) Dai Ge discovered that jbig2dec incorrectly handled memory when decoding malformed image files. If a user or automated system were tricked into processing a specially crafted JBIG2 image file, a remote attacker could cause jbig2dec to crash, resulting in a denial of service, or possibly disclose sensitive information. (CVE-2017-7976). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 100413 published 2017-05-25 reporter Ubuntu Security Notice (C) 2017-2019 Canonical, Inc. / NASL script (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100413 title Ubuntu 14.04 LTS / 16.04 LTS / 16.10 / 17.04 : jbig2dec vulnerabilities (USN-3297-1) NASL family Huawei Local Security Checks NASL id EULEROS_SA-2019-2528.NASL description According to the versions of the ghostscript packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - ghostscript before version 9.21 is vulnerable to a heap based buffer overflow that was found in the ghostscript jbig2_decode_gray_scale_image function which is used to decode halftone segments in a JBIG2 image. A document (PostScript or PDF) with an embedded, specially crafted, jbig2 image could trigger a segmentation fault in ghostscript.(CVE-2016-9601) - Artifex jbig2dec 0.13 allows out-of-bounds writes and reads because of an integer overflow in the jbig2_image_compose function in jbig2_image.c during operations on a crafted .jb2 file, leading to a denial of service (application crash) or disclosure of sensitive information from process memory.(CVE-2017-7976) - Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.(CVE-2017-7975) - Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file.(CVE-2017-7885) - libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file.(CVE-2017-9216) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-05-08 modified 2019-12-09 plugin id 131802 published 2019-12-09 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/131802 title EulerOS 2.0 SP5 : ghostscript (EulerOS-SA-2019-2528) NASL family Huawei Local Security Checks NASL id EULEROS_SA-2020-1240.NASL description According to the versions of the ghostscript package installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities : - The PS Interpreter in Ghostscript 9.18 and 9.20 allows remote attackers to execute arbitrary code via crafted userparams.(CVE-2016-7976) - psi/zfile.c in Artifex Ghostscript before 9.21rc1 permits the status command even if -dSAFER is used, which might allow remote attackers to determine the existence and size of arbitrary files, a similar issue to CVE-2016-7977.(CVE-2018-11645) - A flaw was found in, ghostscript versions prior to 9.50, in the .pdfexectoken and other procedures where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14817) - A flaw was found in ghostscript, versions 9.x before 9.50, in the setsystemparams procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14813) - A flaw was found in all ghostscript versions 9.x before 9.50, in the .setuserparams2 procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14812) - A flaw was found in, ghostscript versions prior to 9.50, in the .pdf_hook_DSC_Creator procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.(CVE-2019-14811) - libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file.(CVE-2017-9216) - Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.(CVE-2017-7975) - Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file.(CVE-2017-7885) - Artifex jbig2dec 0.13 allows out-of-bounds writes and reads because of an integer overflow in the jbig2_image_compose function in jbig2_image.c during operations on a crafted .jb2 file, leading to a denial of service (application crash) or disclosure of sensitive information from process memory.(CVE-2017-7976) - A heap based buffer overflow was found in the ghostscript jbig2_decode_gray_scale_image() function used to decode halftone segments in a JBIG2 image. A document (PostScript or PDF) with an embedded, specially crafted, jbig2 image could trigger a segmentation fault in ghostscript.(CVE-2016-9601) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-03-19 modified 2020-03-13 plugin id 134529 published 2020-03-13 reporter This script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/134529 title EulerOS Virtualization for ARM 64 3.0.2.0 : ghostscript (EulerOS-SA-2020-1240) NASL family Huawei Local Security Checks NASL id EULEROS_SA-2019-2586.NASL description According to the versions of the ghostscript packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file.(CVE-2017-7885) - Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code.(CVE-2017-7975) - ghostscript before version 9.21 is vulnerable to a heap based buffer overflow that was found in the ghostscript jbig2_decode_gray_scale_image function which is used to decode halftone segments in a JBIG2 image. A document (PostScript or PDF) with an embedded, specially crafted, jbig2 image could trigger a segmentation fault in ghostscript.(CVE-2016-9601) - libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file.(CVE-2017-9216) - psi/ztoken.c in Artifex Ghostscript 9.21 mishandles references to the scanner state structure, which allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted PostScript document, related to an out-of-bounds read in the igc_reloc_struct_ptr function in psi/igc.c.(CVE-2017-11714) - The fill_threshhold_buffer function in base/gxht_thresh.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted PostScript document.(CVE-2016-10317) - The gs_alloc_ref_array function in psi/ialloc.c in Artifex Ghostscript 9.21 allows remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted PostScript document. This is related to a lack of an integer overflow check in base/gsalloc.c.(CVE-2017-9835) - The gs_makewordimagedevice function in base/gsdevmem.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted file that is mishandled in the PDF Transparency module.(CVE-2016-10220) - The intersect function in base/gxfill.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (divide-by-zero error and application crash) via a crafted file.(CVE-2016-10219) - The mem_get_bits_rectangle function in base/gdevmem.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted file.(CVE-2017-5951) - The pdf14_open function in base/gdevp14.c in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (use-after-free and application crash) via a crafted file that is mishandled in the color management module.(CVE-2016-10217) - The pdf14_pop_transparency_group function in base/gdevp14.c in the PDF Transparency module in Artifex Software, Inc. Ghostscript 9.20 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted file.(CVE-2016-10218) Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-05-08 modified 2019-12-18 plugin id 132121 published 2019-12-18 reporter This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/132121 title EulerOS 2.0 SP3 : ghostscript (EulerOS-SA-2019-2586) NASL family Debian Local Security Checks NASL id DEBIAN_DLA-942.NASL description CVE-2017-7885 Artifex jbig2dec 0.13 has a heap-based buffer over-read leading to denial of service (application crash) or disclosure of sensitive information from process memory, because of an integer overflow in the jbig2_decode_symbol_dict function in jbig2_symbol_dict.c in libjbig2dec.a during operation on a crafted .jb2 file. CVE-2017-7975 Artifex jbig2dec 0.13, as used in Ghostscript, allows out-of-bounds writes because of an integer overflow in the jbig2_build_huffman_table function in jbig2_huffman.c during operations on a crafted JBIG2 file, leading to a denial of service (application crash) or possibly execution of arbitrary code. CVE-2017-7976 Artifex jbig2dec 0.13 allows out-of-bounds writes and reads because of an integer overflow in the jbig2_image_compose function in jbig2_image.c during operations on a crafted .jb2 file, leading to a denial of service (application crash) or disclosure of sensitive information from process memory. For Debian 7 last seen 2020-03-17 modified 2017-05-16 plugin id 100177 published 2017-05-16 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100177 title Debian DLA-942-1 : jbig2dec security update NASL family Fedora Local Security Checks NASL id FEDORA_2017-C85C0E5637.NASL description Security fixes release for these CVEs : - [CVE-2016-10217](https://access.redhat.com/security/cve/ CVE-2016-10217) *(use-after-free and application crash)* - [CVE-2016-10218](https://access.redhat.com/security/cve/ CVE-2016-10218) *(NULL pointer dereference and application crash)* - [CVE-2016-10219](https://access.redhat.com/security/cve/ CVE-2016-10219) *(divide-by-zero error and application crash)* - [CVE-2016-10220](https://access.redhat.com/security/cve/ CVE-2016-10220) *(NULL pointer dereference and application crash)* - [CVE-2017-5951](https://access.redhat.com/security/cve/C VE-2017-5951) *(NULL pointer dereference and application crash)* - [CVE-2017-7975](https://access.redhat.com/security/cve/C VE-2017-7975) *(application crash or possible execution of arbitrary code)* - [CVE-2017-8291](https://access.redhat.com/security/cve/C VE-2017-8291) *( -dSAFER bypass and remote command execution)* Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-05-08 plugin id 100013 published 2017-05-08 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100013 title Fedora 25 : ghostscript (2017-c85c0e5637) NASL family Gentoo Local Security Checks NASL id GENTOO_GLSA-201708-10.NASL description The remote host is affected by the vulnerability described in GLSA-201708-10 (jbig2dec: User-assisted execution of arbitrary code) Integer overflow errors have been discovered in the jbig2_decode_symbol_dict, jbig2_build_huffman_table, and jbig2_image_compose functions of jbig2dec. Impact : A remote attacker, by enticing a user to open a specially crafted JBIG2 file using an application linked against jbig2dec, could possibly execute arbitrary code with the privileges of the process or cause a Denial of Service condition. Workaround : There is no known workaround at this time. last seen 2020-06-01 modified 2020-06-02 plugin id 102799 published 2017-08-28 reporter This script is Copyright (C) 2017-2018 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/102799 title GLSA-201708-10 : jbig2dec: User-assisted execution of arbitrary code NASL family Fedora Local Security Checks NASL id FEDORA_2017-A606D224A5.NASL description Security fixes release for these CVEs : - [CVE-2016-10217](https://access.redhat.com/security/cve/ CVE-2016-10217) *(use-after-free and application crash)* - [CVE-2016-10218](https://access.redhat.com/security/cve/ CVE-2016-10218) *(NULL pointer dereference and application crash)* - [CVE-2016-10219](https://access.redhat.com/security/cve/ CVE-2016-10219) *(divide-by-zero error and application crash)* - [CVE-2016-10220](https://access.redhat.com/security/cve/ CVE-2016-10220) *(NULL pointer dereference and application crash)* - [CVE-2017-5951](https://access.redhat.com/security/cve/C VE-2017-5951) *(NULL pointer dereference and application crash)* - [CVE-2017-7975](https://access.redhat.com/security/cve/C VE-2017-7975) *(application crash or possible execution of arbitrary code)* - [CVE-2017-8291](https://access.redhat.com/security/cve/C VE-2017-8291) *( -dSAFER bypass and remote command execution)* Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-07-17 plugin id 101695 published 2017-07-17 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/101695 title Fedora 26 : ghostscript (2017-a606d224a5) NASL family Fedora Local Security Checks NASL id FEDORA_2017-58170ECB09.NASL description Security fix for CVE-2017-7885 CVE-2017-7975 Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2017-05-22 plugin id 100310 published 2017-05-22 reporter This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/100310 title Fedora 25 : jbig2dec (2017-58170ecb09)