Vulnerabilities > CVE-2015-6815 - Infinite Loop vulnerability in multiple products
Attack vector
ADJACENT_NETWORK Attack complexity
LOW Privileges required
LOW Confidentiality impact
NONE Integrity impact
NONE Availability impact
LOW Summary
The process_tx_desc function in hw/net/e1000.c in QEMU before 2.4.0.1 does not properly process transmit descriptor data when sending a network packet, which allows attackers to cause a denial of service (infinite loop and guest crash) via unspecified vectors.
Vulnerable Configurations
Common Weakness Enumeration (CWE)
Nessus
NASL family SuSE Local Security Checks NASL id OPENSUSE-2015-750.NASL description xen was updated to fix 12 security issues. These security issues were fixed : - CVE-2015-7972: Populate-on-demand balloon size inaccuracy can crash guests (bsc#951845). - CVE-2015-7969: Leak of main per-domain vcpu pointer array (DoS) (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling-related vcpu pointer array (DoS) (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). - CVE-2015-4037: Insecure temporary file use in /net/slirp.c (bsc#932267). - CVE-2014-0222: Validate L2 table size to avoid integer overflows (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl fails to honour readonly flag on disks with qemu-xen (bsc#947165). - CVE-2015-5165: QEMU leak of uninitialized heap memory in rtl8139 device model (bsc#939712). - CVE-2015-5166: Use after free in QEMU/Xen block unplug protocol (bsc#939709). - CVE-2015-5154: Host code execution via IDE subsystem CD-ROM (bsc#938344). - CVE-2015-3259: xl command line config handling stack overflow (bsc#935634). These non-security issues were fixed : - bsc#907514: Bus fatal error and sles12 sudden reboot has been observed - bsc#910258: SLES12 Xen host crashes with FATAL NMI after shutdown of guest with VT-d NIC - bsc#918984: Bus fatal error and sles11-SP4 sudden reboot has been observed - bsc#923967: Partner-L3: Bus fatal error and sles11-SP3 sudden reboot has been observed - bsc#901488: Intel ixgbe driver assigns rx/tx queues per core resulting in irq problems on servers with a large amount of CPU cores - bsc#945167: Running command xl pci-assignable-add 03:10.1 secondly show errors - bsc#949138: Setting vcpu affinity under Xen causes libvirtd abort - bsc#944463: VUL-0: CVE-2015-5239: qemu-kvm: Integer overflow in vnc_client_read() and protocol_client_msg() - bsc#944697: VUL-1: CVE-2015-6815: qemu: net: e1000: infinite loop issue - bsc#925466: Kdump does not work in a XEN environment last seen 2020-06-05 modified 2015-11-18 plugin id 86909 published 2015-11-18 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86909 title openSUSE Security Update : xen (openSUSE-2015-750) code #%NASL_MIN_LEVEL 80502 # # (C) Tenable Network Security, Inc. # # The descriptive text and package checks in this plugin were # extracted from openSUSE Security Update openSUSE-2015-750. # # The text description of this plugin is (C) SUSE LLC. # include("compat.inc"); if (description) { script_id(86909); script_version("2.3"); script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04"); script_cve_id("CVE-2014-0222", "CVE-2015-3259", "CVE-2015-4037", "CVE-2015-5154", "CVE-2015-5165", "CVE-2015-5166", "CVE-2015-5239", "CVE-2015-6815", "CVE-2015-7311", "CVE-2015-7835", "CVE-2015-7969", "CVE-2015-7971", "CVE-2015-7972"); script_name(english:"openSUSE Security Update : xen (openSUSE-2015-750)"); script_summary(english:"Check for the openSUSE-2015-750 patch"); script_set_attribute( attribute:"synopsis", value:"The remote openSUSE host is missing a security update." ); script_set_attribute( attribute:"description", value: "xen was updated to fix 12 security issues. These security issues were fixed : - CVE-2015-7972: Populate-on-demand balloon size inaccuracy can crash guests (bsc#951845). - CVE-2015-7969: Leak of main per-domain vcpu pointer array (DoS) (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling-related vcpu pointer array (DoS) (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). - CVE-2015-4037: Insecure temporary file use in /net/slirp.c (bsc#932267). - CVE-2014-0222: Validate L2 table size to avoid integer overflows (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl fails to honour readonly flag on disks with qemu-xen (bsc#947165). - CVE-2015-5165: QEMU leak of uninitialized heap memory in rtl8139 device model (bsc#939712). - CVE-2015-5166: Use after free in QEMU/Xen block unplug protocol (bsc#939709). - CVE-2015-5154: Host code execution via IDE subsystem CD-ROM (bsc#938344). - CVE-2015-3259: xl command line config handling stack overflow (bsc#935634). These non-security issues were fixed : - bsc#907514: Bus fatal error and sles12 sudden reboot has been observed - bsc#910258: SLES12 Xen host crashes with FATAL NMI after shutdown of guest with VT-d NIC - bsc#918984: Bus fatal error and sles11-SP4 sudden reboot has been observed - bsc#923967: Partner-L3: Bus fatal error and sles11-SP3 sudden reboot has been observed - bsc#901488: Intel ixgbe driver assigns rx/tx queues per core resulting in irq problems on servers with a large amount of CPU cores - bsc#945167: Running command xl pci-assignable-add 03:10.1 secondly show errors - bsc#949138: Setting vcpu affinity under Xen causes libvirtd abort - bsc#944463: VUL-0: CVE-2015-5239: qemu-kvm: Integer overflow in vnc_client_read() and protocol_client_msg() - bsc#944697: VUL-1: CVE-2015-6815: qemu: net: e1000: infinite loop issue - bsc#925466: Kdump does not work in a XEN environment" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=877642" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=901488" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=907514" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=910258" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=918984" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=923967" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=925466" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=932267" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=935634" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=938344" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=939709" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=939712" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=944463" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=944697" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=945167" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=947165" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=949138" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950367" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950703" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950705" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=950706" ); script_set_attribute( attribute:"see_also", value:"https://bugzilla.opensuse.org/show_bug.cgi?id=951845" ); script_set_attribute(attribute:"solution", value:"Update the affected xen packages."); script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P"); script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"); script_set_attribute(attribute:"plugin_type", value:"local"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-debugsource"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-devel"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-doc-html"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-default"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-default-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-desktop"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-kmp-desktop-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs-32bit"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-libs-debuginfo-32bit"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools-debuginfo"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools-domU"); script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:xen-tools-domU-debuginfo"); script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:13.2"); script_set_attribute(attribute:"vuln_publication_date", value:"2014/11/04"); script_set_attribute(attribute:"patch_publication_date", value:"2015/10/30"); script_set_attribute(attribute:"plugin_publication_date", value:"2015/11/18"); script_set_attribute(attribute:"generated_plugin", value:"current"); script_end_attributes(); script_category(ACT_GATHER_INFO); script_copyright(english:"This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof."); script_family(english:"SuSE Local Security Checks"); script_dependencies("ssh_get_info.nasl"); script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu"); exit(0); } include("audit.inc"); include("global_settings.inc"); include("rpm.inc"); if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED); release = get_kb_item("Host/SuSE/release"); if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE"); if (release !~ "^(SUSE13\.2)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "13.2", release); if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING); ourarch = get_kb_item("Host/cpu"); if (!ourarch) audit(AUDIT_UNKNOWN_ARCH); if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch); flag = 0; if ( rpm_check(release:"SUSE13.2", reference:"xen-debugsource-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", reference:"xen-devel-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", reference:"xen-libs-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", reference:"xen-libs-debuginfo-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", reference:"xen-tools-domU-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", reference:"xen-tools-domU-debuginfo-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-doc-html-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-default-4.4.3_02_k3.16.7_29-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-default-debuginfo-4.4.3_02_k3.16.7_29-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-desktop-4.4.3_02_k3.16.7_29-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-kmp-desktop-debuginfo-4.4.3_02_k3.16.7_29-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-libs-32bit-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-libs-debuginfo-32bit-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-tools-4.4.3_02-30.1") ) flag++; if ( rpm_check(release:"SUSE13.2", cpu:"x86_64", reference:"xen-tools-debuginfo-4.4.3_02-30.1") ) flag++; if (flag) { if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get()); else security_hole(0); exit(0); } else { tested = pkg_tests_get(); if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested); else audit(AUDIT_PACKAGE_NOT_INSTALLED, "xen-debugsource / xen-devel / xen-libs-32bit / xen-libs / etc"); }
NASL family Fedora Local Security Checks NASL id FEDORA_2015-015AEC3BF2.NASL description ui/vnc: limit client_cut_text msg payload size [CVE-2015-5239] (#1259504), e1000: Avoid infinite loop in processing transmit descriptor [CVE-2015-6815] (#1260224), net: add checks to validate ring buffer pointers [CVE-2015-5279] (#1263278), net: avoid infinite loop when receiving packets [CVE-2015-5278] (#1263281), qemu buffer overflow in virtio-serial [CVE-2015-5745] (#1251354) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2016-03-04 plugin id 89126 published 2016-03-04 reporter This script is Copyright (C) 2016-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/89126 title Fedora 21 : xen-4.4.3-4.fc21 (2015-015aec3bf2) NASL family Fedora Local Security Checks NASL id FEDORA_2015-16369.NASL description - Fix typo causing qemu-img to link against entire world (bz #1260996) * CVE-2015-6815: net: e1000: infinite loop issue (bz #1260225) * CVE-2015-6855: ide: divide by zero issue (bz #1261793) * CVE-2015-5278: Infinite loop in ne2000_receive() (bz #1263284) * CVE-2015-5279: Heap overflow vulnerability in ne2000_receive() (bz #1263287) * Make block copy more stable (bz #1264416) * Fix hang at start of live merge for large images (bz #1262901) ---- Fix emulation of various instructions, required by libm in F22 ppc64 guests. Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2015-10-12 plugin id 86333 published 2015-10-12 reporter This script is Copyright (C) 2015-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/86333 title Fedora 22 : qemu-2.3.1-5.fc22 (2015-16369) NASL family SuSE Local Security Checks NASL id OPENSUSE-2016-439.NASL description xen was updated to version 4.4.4 to fix 33 security issues. These security issues were fixed : - CVE-2016-2392: NULL pointer dereference in remote NDIS control message handling (bsc#967012). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2016-2270: Xen allowed local guest administrators to cause a denial of service (host reboot) via vectors related to multiple mappings of MMIO pages with different cachability settings (boo#965315). - CVE-2016-2538: Integer overflow in remote NDIS control message handling (bsc#967969). - CVE-2015-7512: Buffer overflow in the pcnet_receive function in hw/net/pcnet.c, when a guest NIC has a larger MTU, allowed remote attackers to cause a denial of service (guest OS crash) or execute arbitrary code via a large packet (boo#962360). - CVE-2014-3689: The vmware-vga driver (hw/display/vmware_vga.c) allowed local guest users to write to qemu memory locations and gain privileges via unspecified parameters related to rectangle handling (boo#962611). - CVE-2015-5278: Infinite loop in ne2000_receive() function (bsc#945989). - CVE-2016-1568: AHCI use-after-free vulnerability in aio port commands (bsc#961332). - CVE-2016-1981: e1000 infinite loop in start_xmit and e1000_receive_iov routines (bsc#963782). - CVE-2016-2198: EHCI NULL pointer dereference in ehci_caps_write (bsc#964413). - CVE-2015-6815: e1000: infinite loop issue (bsc#944697). - CVE-2014-0222: Integer overflow in the qcow_open function in block/qcow.c allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (boo#964925). - CVE-2015-6855: hw/ide/core.c did not properly restrict the commands accepted by an ATAPI device, which allowed guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash (boo#965156). - CVE-2016-2271: VMX in using an Intel or Cyrix CPU, allowed local HVM guest users to cause a denial of service (guest crash) via vectors related to a non-canonical RIP (boo#965317). - CVE-2013-4534: Buffer overflow in hw/intc/openpic.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via vectors related to IRQDest elements (boo#964452). - CVE-2013-4537: The ssi_sd_transfer function in hw/sd/ssi-sd.c allowed remote attackers to execute arbitrary code via a crafted arglen value in a savevm image (boo#962642). - CVE-2015-1779: The VNC websocket frame decoder allowed remote attackers to cause a denial of service (memory and CPU consumption) via a large (1) websocket payload or (2) HTTP headers section (boo#962632). - CVE-2013-4530: Buffer overflow in hw/ssi/pl022.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via crafted tx_fifo_head and rx_fifo_head values in a savevm image (boo#964950). - CVE-2013-4533: Buffer overflow in the pxa2xx_ssp_load function in hw/arm/pxa2xx.c allowed remote attackers to cause a denial of service or possibly execute arbitrary code via a crafted s->rx_level value in a savevm image (boo#964644). - CVE-2013-4539: Multiple buffer overflows in the tsc210x_load function in hw/input/tsc210x.c allowed remote attackers to execute arbitrary code via a crafted (1) precision, (2) nextprecision, (3) function, or (4) nextfunction value in a savevm image (boo#962758). - CVE-2013-4538: Multiple buffer overflows in the ssd0323_load function in hw/display/ssd0323.c allowed remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via crafted (1) cmd_len, (2) row, or (3) col values; (4) row_start and row_end values; or (5) col_star and col_end values in a savevm image (boo#962335). - CVE-2015-8345: eepro100: infinite loop in processing command block list (bsc#956829). - CVE-2015-8613: scsi: stack based buffer overflow in megasas_ctrl_get_info (bsc#961358). - CVE-2015-8619: Stack based OOB write in hmp_sendkey routine (bsc#960334). - CVE-2016-1571: The paging_invlpg function in include/asm-x86/paging.h, when using shadow mode paging or nested virtualization is enabled, allowed local HVM guest users to cause a denial of service (host crash) via a non-canonical guest address in an INVVPID instruction, which triggers a hypervisor bug check (boo#960862). - CVE-2016-1570: The PV superpage functionality in arch/x86/mm.c allowed local PV guests to obtain sensitive information, cause a denial of service, gain privileges, or have unspecified other impact via a crafted page identifier (MFN) to the (1) MMUEXT_MARK_SUPER or (2) MMUEXT_UNMARK_SUPER sub-op in the HYPERVISOR_mmuext_op hypercall or (3) unknown vectors related to page table updates (boo#960861). - CVE-2014-9718: The (1) BMDMA and (2) AHCI HBA interfaces in the IDE functionality had multiple interpretations of a function last seen 2020-06-05 modified 2016-04-13 plugin id 90478 published 2016-04-13 reporter This script is Copyright (C) 2016-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/90478 title openSUSE Security Update : xen (openSUSE-2016-439) NASL family Huawei Local Security Checks NASL id EULEROS_SA-2020-1430.NASL description According to the versions of the qemu-kvm packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities : - In libslirp 4.1.0, as used in QEMU 4.2.0, tcp_subr.c misuses snprintf return values, leading to a buffer overflow in later code.(CVE-2020-8608) - This vulnerability has been modified since it was last analyzed by the NVD. It is awaiting reanalysis which may result in further changes to the information provided.(CVE-2019-11135) - tcp_emu in tcp_subr.c in libslirp 4.1.0, as used in QEMU 4.2.0, mismanages memory, as demonstrated by IRC DCC commands in EMU_IRC. This can cause a heap-based buffer overflow or other out-of-bounds access which can lead to a DoS or potential execute arbitrary code.(CVE-2020-7039) - ip_reass in ip_input.c in libslirp 4.0.0 has a heap-based buffer overflow via a large packet because it mishandles a case involving the first fragment.(CVE-2019-14378) - Integer overflow in the VNC display driver in QEMU before 2.1.0 allows attachers to cause a denial of service (process crash) via a CLIENT_CUT_TEXT message, which triggers an infinite loop.(CVE-2015-5239) - Buffer overflow in the send_control_msg function in hw/char/virtio-serial-bus.c in QEMU before 2.4.0 allows guest users to cause a denial of service (QEMU process crash) via a crafted virtio control message.(CVE-2015-5745) - The ne2000_receive function in hw/net/ne2000.c in QEMU before 2.4.0.1 allows attackers to cause a denial of service (infinite loop and instance crash) or possibly execute arbitrary code via vectors related to receiving packets.(CVE-2015-5278) - The process_tx_desc function in hw/net/e1000.c in QEMU before 2.4.0.1 does not properly process transmit descriptor data when sending a network packet, which allows attackers to cause a denial of service (infinite loop and guest crash) via unspecified vectors.(CVE-2015-6815) - Heap-based buffer overflow in the ne2000_receive function in hw/net/ne2000.c in QEMU before 2.4.0.1 allows guest OS users to cause a denial of service (instance crash) or possibly execute arbitrary code via vectors related to receiving packets.(CVE-2015-5279) - Heap-based buffer overflow in the .receive callback of xlnx.xps-ethernetlite in QEMU (aka Quick Emulator) allows attackers to execute arbitrary code on the QEMU host via a large ethlite packet.(CVE-2016-7161) - hw/net/vmxnet3.c in QEMU 2.0.0-rc0, 1.7.1, and earlier allows local guest users to cause a denial of service or possibly execute arbitrary code via vectors related to (1) RX or (2) TX queue numbers or (3) interrupt indices. NOTE: some of these details are obtained from third party information.(CVE-2013-4544) - The slirp_smb function in net/slirp.c in QEMU 2.3.0 and earlier creates temporary files with predictable names, which allows local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program.(CVE-2015-4037) - hw/ide/core.c in QEMU does not properly restrict the commands accepted by an ATAPI device, which allows guest users to cause a denial of service or possibly have unspecified other impact via certain IDE commands, as demonstrated by a WIN_READ_NATIVE_MAX command to an empty drive, which triggers a divide-by-zero error and instance crash.(CVE-2015-6855) - hw/virtio/virtio.c in the Virtual Network Device (virtio-net) support in QEMU, when big or mergeable receive buffers are not supported, allows remote attackers to cause a denial of service (guest network consumption) via a flood of jumbo frames on the (1) tuntap or (2) macvtap interface.(CVE-2015-7295) - The MSI-X MMIO support in hw/pci/msix.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) by leveraging failure to define the .write method.(CVE-2015-7549) - The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list.(CVE-2015-8345) - Qemu, when built with VNC display driver support, allows remote attackers to cause a denial of service (arithmetic exception and application crash) via crafted SetPixelFormat messages from a client.(CVE-2015-8504) - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD) list.(CVE-2015-8558) - Memory leak in net/vmxnet3.c in QEMU allows remote attackers to cause a denial of service (memory consumption).(CVE-2015-8567) - Memory leak in QEMU, when built with a VMWARE VMXNET3 paravirtual NIC emulator support, allows local guest users to cause a denial of service (host memory consumption) by trying to activate the vmxnet3 device repeatedly.(CVE-2015-8568) - Stack-based buffer overflow in the megasas_ctrl_get_info function in QEMU, when built with SCSI MegaRAID SAS HBA emulation support, allows local guest users to cause a denial of service (QEMU instance crash) via a crafted SCSI controller CTRL_GET_INFO command.(CVE-2015-8613) - Use-after-free vulnerability in hw/ide/ahci.c in QEMU, when built with IDE AHCI Emulation support, allows guest OS users to cause a denial of service (instance crash) or possibly execute arbitrary code via an invalid AHCI Native Command Queuing (NCQ) AIO command.(CVE-2016-1568) - QEMU (aka Quick Emulator) built with the USB EHCI emulation support is vulnerable to a null pointer dereference flaw. It could occur when an application attempts to write to EHCI capabilities registers. A privileged user inside quest could use this flaw to crash the QEMU process instance resulting in DoS.(CVE-2016-2198) - The ohci_bus_start function in the USB OHCI emulation support (hw/usb/hcd-ohci.c) in QEMU allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors related to multiple eof_timers.(CVE-2016-2391) - The is_rndis function in the USB Net device emulator (hw/usb/dev-network.c) in QEMU before 2.5.1 does not properly validate USB configuration descriptor objects, which allows local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving a remote NDIS control message packet.(CVE-2016-2392) - Multiple integer overflows in the USB Net device emulator (hw/usb/dev-network.c) in QEMU before 2.5.1 allow local guest OS administrators to cause a denial of service (QEMU process crash) or obtain sensitive host memory information via a remote NDIS control message packet that is mishandled in the (1) rndis_query_response, (2) rndis_set_response, or (3) usb_net_handle_dataout function.(CVE-2016-2538) - The ne2000_receive function in the NE2000 NIC emulation support (hw/net/ne2000.c) in QEMU before 2.5.1 allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via crafted values for the PSTART and PSTOP registers, involving ring buffer control.(CVE-2016-2841) - QEMU, when built with the Pseudo Random Number Generator (PRNG) back-end support, allows local guest OS users to cause a denial of service (process crash) via an entropy request, which triggers arbitrary stack based allocation and memory corruption.(CVE-2016-2858) - Buffer overflow in the stellaris_enet_receive function in hw/net/stellaris_enet.c in QEMU, when the Stellaris ethernet controller is configured to accept large packets, allows remote attackers to cause a denial of service (QEMU crash) via a large packet.(CVE-2016-4001) - Buffer overflow in the mipsnet_receive function in hw/net/mipsnet.c in QEMU, when the guest NIC is configured to accept large packets, allows remote attackers to cause a denial of service (memory corruption and QEMU crash) or possibly execute arbitrary code via a packet larger than 1514 bytes.(CVE-2016-4002) - The ehci_advance_state function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via a circular split isochronous transfer descriptor (siTD) list, a related issue to CVE-2015-8558.(CVE-2016-4037) - The vmsvga_fifo_run function in hw/display/vmware_vga.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a VGA command.(CVE-2016-4453) - The vmsvga_fifo_read_raw function in hw/display/vmware_vga.c in QEMU allows local guest OS administrators to obtain sensitive host memory information or cause a denial of service (QEMU process crash) by changing FIFO registers and issuing a VGA command, which triggers an out-of-bounds read.(CVE-2016-4454) - The net_tx_pkt_do_sw_fragmentation function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a zero length for the current fragment length.(CVE-2016-6834) - The vmxnet_tx_pkt_parse_headers function in hw/net/vmxnet_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (buffer over-read) by leveraging failure to check IP header length.(CVE-2016-6835) - The vmxnet3_complete_packet function in hw/net/vmxnet3.c in QEMU (aka Quick Emulator) allows local guest OS administrators to obtain sensitive host memory information by leveraging failure to initialize the txcq_descr object.(CVE-2016-6836) - Integer overflow in the net_tx_pkt_init function in hw/net/net_tx_pkt.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (QEMU process crash) via the maximum fragmentation count, which triggers an unchecked multiplication and NULL pointer dereference.(CVE-2016-6888) - Directory traversal vulnerability in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to access host files outside the export path via a .. (dot dot) in an unspecified string.(CVE-2016-7116) - The pvscsi_ring_pop_req_descr function in hw/scsi/vmw_pvscsi.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by leveraging failure to limit process IO loop to the ring size.(CVE-2016-7421) - The mcf_fec_do_tx function in hw/net/mcf_fec.c in QEMU (aka Quick Emulator) does not properly limit the buffer descriptor count when transmitting packets, which allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via vectors involving a buffer descriptor with a length of 0 and crafted values in bd.flags.(CVE-2016-7908) - The pcnet_rdra_addr function in hw/net/pcnet.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by setting the (1) receive or (2) transmit descriptor ring length to 0.(CVE-2016-7909) - The xhci_ring_fetch function in hw/usb/hcd-xhci.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by leveraging failure to limit the number of link Transfer Request Blocks (TRB) to process.(CVE-2016-8576) - The serial_update_parameters function in hw/char/serial.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (divide-by-zero error and QEMU process crash) via vectors involving a value of divider greater than baud base.(CVE-2016-8669) - The intel_hda_xfer function in hw/audio/intel-hda.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via an entry with the same value for buffer length and pointer position.(CVE-2016-8909) - The rtl8139_cplus_transmit function in hw/net/rtl8139.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) by leveraging failure to limit the ring descriptor count.(CVE-2016-8910) - Memory leak in the v9fs_xattrcreate function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) via a large number of Txattrcreate messages with the same fid number.(CVE-2016-9102) - The v9fs_xattrcreate function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to obtain sensitive host heap memory information by reading xattribute values before writing to them.(CVE-2016-9103) - Multiple integer overflows in the (1) v9fs_xattr_read and (2) v9fs_xattr_write functions in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local guest OS administrators to cause a denial of service (QEMU process crash) via a crafted offset, which triggers an out-of-bounds access.(CVE-2016-9104) - Memory leak in the v9fs_link function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption) via vectors involving a reference to the source fid object.(CVE-2016-9105) - Memory leak in the v9fs_write function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (memory consumption) by leveraging failure to free an IO vector.(CVE-2016-9106) - Race condition in QEMU in Xen allows local x86 HVM guest OS administrators to gain privileges by changing certain data on shared rings, aka a last seen 2020-05-06 modified 2020-04-15 plugin id 135559 published 2020-04-15 reporter This script is Copyright (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/135559 title EulerOS 2.0 SP3 : qemu-kvm (EulerOS-SA-2020-1430) NASL family SuSE Local Security Checks NASL id SUSE_SU-2015-1894-1.NASL description xen was updated to version 4.4.3 to fix nine security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl in Xen did not properly handle the readonly flag on disks when using the qemu-xen device model, which allowed local guest users to write to a read-only disk image (bsc#947165). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 86753 published 2015-11-05 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86753 title SUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:1894-1) NASL family SuSE Local Security Checks NASL id SUSE_SU-2015-1952-1.NASL description xen was updated to fix eight security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 86865 published 2015-11-13 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86865 title SUSE SLES11 Security Update : xen (SUSE-SU-2015:1952-1) NASL family SuSE Local Security Checks NASL id SUSE_SU-2015-2324-1.NASL description This update fixes the following security issues : - bsc#956832 - CVE-2015-8345: xen: qemu: net: eepro100: infinite loop in processing command block list - Revert x86/IO-APIC: don last seen 2020-06-01 modified 2020-06-02 plugin id 87588 published 2015-12-22 reporter This script is Copyright (C) 2015-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/87588 title SUSE SLED12 / SLES12 Security Update : xen (SUSE-SU-2015:2324-1) NASL family Ubuntu Local Security Checks NASL id UBUNTU_USN-2745-1.NASL description Lian Yihan discovered that QEMU incorrectly handled certain payload messages in the VNC display driver. A malicious guest could use this issue to cause the QEMU process to hang, resulting in a denial of service. This issue only affected Ubuntu 12.04 LTS and Ubuntu 14.04 LTS. (CVE-2015-5239) Qinghao Tang discovered that QEMU incorrectly handled receiving certain packets in the NE2000 network driver. A malicious guest could use this issue to cause the QEMU process to hang, resulting in a denial of service. (CVE-2015-5278) Qinghao Tang discovered that QEMU incorrectly handled receiving certain packets in the NE2000 network driver. A malicious guest could use this issue to cause a denial of service, or possibly execute arbitrary code on the host as the user running the QEMU process. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. (CVE-2015-5279) Qinghao Tang discovered that QEMU incorrectly handled transmit descriptor data when sending network packets. A malicious guest could use this issue to cause the QEMU process to hang, resulting in a denial of service. (CVE-2015-6815) Qinghao Tang discovered that QEMU incorrectly handled ATAPI command permissions. A malicious guest could use this issue to cause the QEMU process to crash, resulting in a denial of service. (CVE-2015-6855). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 86146 published 2015-09-25 reporter Ubuntu Security Notice (C) 2015-2020 Canonical, Inc. / NASL script (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86146 title Ubuntu 12.04 LTS / 14.04 LTS / 15.04 : qemu, qemu-kvm vulnerabilities (USN-2745-1) NASL family SuSE Local Security Checks NASL id OPENSUSE-2015-892.NASL description This update fixes the following security issues : - bsc#947165 - CVE-2015-7311: xen: libxl fails to honour readonly flag on disks with qemu-xen (xsa-142) - bsc#954405 - CVE-2015-8104: Xen: guest to host DoS by triggering an infinite loop in microcode via #DB exception - bsc#954018 - CVE-2015-5307: xen: x86: CPU lockup during fault delivery (XSA-156) - bsc#950704 - CVE-2015-7970 xen: x86: Long latency populate-on-demand operation is not preemptible (XSA-150) 563212c9-x86-PoD-Eager-sweep-for-zeroed-pages.patch last seen 2020-06-05 modified 2015-12-16 plugin id 87393 published 2015-12-16 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/87393 title openSUSE Security Update : xen (openSUSE-2015-892) NASL family Fedora Local Security Checks NASL id FEDORA_2015-28CFCE6702.NASL description ui/vnc: limit client_cut_text msg payload size [CVE-2015-5239] (#1259504), e1000: Avoid infinite loop in processing transmit descriptor [CVE-2015-6815] (#1260224), net: add checks to validate ring buffer pointers [CVE-2015-5279] (#1263278), net: avoid infinite loop when receiving packets [CVE-2015-5278] (#1263281), qemu buffer overflow in virtio-serial [CVE-2015-5745] (#1251354) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2016-03-04 plugin id 89186 published 2016-03-04 reporter This script is Copyright (C) 2016-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/89186 title Fedora 23 : xen-4.5.1-9.fc23 (2015-28cfce6702) NASL family SuSE Local Security Checks NASL id SUSE_SU-2015-1853-1.NASL description xen was updated to fix nine security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl in Xen did not properly handle the readonly flag on disks when using the qemu-xen device model, which allowed local guest users to write to a read-only disk image (bsc#947165). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 86704 published 2015-11-03 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86704 title SUSE SLED11 / SLES11 Security Update : xen (SUSE-SU-2015:1853-1) NASL family Fedora Local Security Checks NASL id FEDORA_2015-16370.NASL description - CVE-2015-6815: net: e1000: infinite loop issue (bz #1260225) * CVE-2015-6855: ide: divide by zero issue (bz #1261793) * CVE-2015-5278: Infinite loop in ne2000_receive() (bz #1263284) * CVE-2015-5279: Heap overflow vulnerability in ne2000_receive() (bz #1263287) ---- Fix emulation of various instructions, required by libm in F22 ppc64 guests. Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2015-09-24 plugin id 86112 published 2015-09-24 reporter This script is Copyright (C) 2015-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/86112 title Fedora 23 : qemu-2.4.0-4.fc23 (2015-16370) NASL family Gentoo Local Security Checks NASL id GENTOO_GLSA-201602-01.NASL description The remote host is affected by the vulnerability described in GLSA-201602-01 (QEMU: Multiple vulnerabilities) Multiple vulnerabilities have been discovered in QEMU. Please review the CVE identifiers referenced below for details. Impact : A remote attacker might cause a Denial of Service or gain escalated privileges from a guest VM. Workaround : There is no known workaround at this time. last seen 2020-06-01 modified 2020-06-02 plugin id 88587 published 2016-02-05 reporter This script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/88587 title GLSA-201602-01 : QEMU: Multiple vulnerabilities (Venom) NASL family FreeBSD Local Security Checks NASL id FREEBSD_PKG_10BF8EEDB14D11E59728002590263BF5.NASL description Prasad J Pandit, Red Hat Product Security Team, reports : Qemu emulator built with the e1000 NIC emulation support is vulnerable to an infinite loop issue. It could occur while processing transmit descriptor data when sending a network packet. A privileged user inside guest could use this flaw to crash the Qemu instance resulting in DoS. last seen 2020-06-01 modified 2020-06-02 plugin id 87685 published 2016-01-04 reporter This script is Copyright (C) 2016-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/87685 title FreeBSD : qemu -- denial of service vulnerability in e1000 NIC support (10bf8eed-b14d-11e5-9728-002590263bf5) NASL family Fedora Local Security Checks NASL id FEDORA_2015-16368.NASL description - CVE-2015-6815: net: e1000: infinite loop issue (bz #1260225) * CVE-2015-6855: ide: divide by zero issue (bz #1261793) * CVE-2015-5278: Infinite loop in ne2000_receive() (bz #1263284) * CVE-2015-5279: Heap overflow vulnerability in ne2000_receive() (bz #1263287) * Make block copy more stable (bz #1264416) * Fix hang at start of live merge for large images (bz #1262901) ---- * CVE-2015-5225: heap memory corruption in vnc_refresh_server_surface (bz #1255899) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2015-10-12 plugin id 86332 published 2015-10-12 reporter This script is Copyright (C) 2015-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/86332 title Fedora 21 : qemu-2.1.3-11.fc21 (2015-16368) NASL family SuSE Local Security Checks NASL id SUSE_SU-2015-1908-1.NASL description xen was updated to version 4.4.3 to fix nine security issues. These security issues were fixed : - CVE-2015-4037: The slirp_smb function in net/slirp.c created temporary files with predictable names, which allowed local users to cause a denial of service (instantiation failure) by creating /tmp/qemu-smb.*-* files before the program (bsc#932267). - CVE-2014-0222: Integer overflow in the qcow_open function allowed remote attackers to cause a denial of service (crash) via a large L2 table in a QCOW version 1 image (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl in Xen did not properly handle the readonly flag on disks when using the qemu-xen device model, which allowed local guest users to write to a read-only disk image (bsc#947165). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: With e1000 NIC emulation support it was possible to enter an infinite loop (bsc#944697). - CVE-2015-7969: Leak of main per-domain vcpu pointer array leading to denial of service (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling- related vcpu pointer array leading to denial of service (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 86756 published 2015-11-05 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86756 title SUSE SLED12 / SLES12 Security Update : xen (SUSE-SU-2015:1908-1) NASL family SuSE Local Security Checks NASL id SUSE_SU-2016-2781-1.NASL description qemu was updated to fix 21 security issues. These security issues were fixed : - CVE-2014-5388: Off-by-one error in the pci_read function in the ACPI PCI hotplug interface (hw/acpi/pcihp.c) in QEMU allowed local guest users to obtain sensitive information and have other unspecified impact related to a crafted PCI device that triggers memory corruption (bsc#893323). - CVE-2015-6815: e1000 NIC emulation support was vulnerable to an infinite loop issue. A privileged user inside guest could have used this flaw to crash the Qemu instance resulting in DoS. (bsc#944697). - CVE-2016-2391: The ohci_bus_start function in the USB OHCI emulation support (hw/usb/hcd-ohci.c) in QEMU allowed local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors related to multiple eof_timers (bsc#967013). - CVE-2016-2392: The is_rndis function in the USB Net device emulator (hw/usb/dev-network.c) in QEMU did not properly validate USB configuration descriptor objects, which allowed local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving a remote NDIS control message packet (bsc#967012). - CVE-2016-4453: The vmsvga_fifo_run function in hw/display/vmware_vga.c in QEMU allowed local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a VGA command (bsc#982223). - CVE-2016-4454: The vmsvga_fifo_read_raw function in hw/display/vmware_vga.c in QEMU allowed local guest OS administrators to obtain sensitive host memory information or cause a denial of service (QEMU process crash) by changing FIFO registers and issuing a VGA command, which triggers an out-of-bounds read (bsc#982222). - CVE-2016-5105: The megasas_dcmd_cfg_read function in hw/scsi/megasas.c in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, used an uninitialized variable, which allowed local guest administrators to read host memory via vectors involving a MegaRAID Firmware Interface (MFI) command (bsc#982017). - CVE-2016-5106: The megasas_dcmd_set_properties function in hw/scsi/megasas.c in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allowed local guest administrators to cause a denial of service (out-of-bounds write access) via vectors involving a MegaRAID Firmware Interface (MFI) command (bsc#982018). - CVE-2016-5107: The megasas_lookup_frame function in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allowed local guest OS administrators to cause a denial of service (out-of-bounds read and crash) via unspecified vectors (bsc#982019). - CVE-2016-5126: Heap-based buffer overflow in the iscsi_aio_ioctl function in block/iscsi.c in QEMU allowed local guest OS users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code via a crafted iSCSI asynchronous I/O ioctl call (bsc#982285). - CVE-2016-5238: The get_cmd function in hw/scsi/esp.c in QEMU allowed local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) via vectors related to reading from the information transfer buffer in non-DMA mode (bsc#982959). - CVE-2016-5337: The megasas_ctrl_get_info function in hw/scsi/megasas.c in QEMU allowed local guest OS administrators to obtain sensitive host memory information via vectors related to reading device control information (bsc#983961). - CVE-2016-5338: The (1) esp_reg_read and (2) esp_reg_write functions in hw/scsi/esp.c in QEMU allowed local guest OS administrators to cause a denial of service (QEMU process crash) or execute arbitrary code on the QEMU host via vectors related to the information transfer buffer (bsc#983982). - CVE-2016-5403: The virtqueue_pop function in hw/virtio/virtio.c in QEMU allowed local guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) by submitting requests without waiting for completion (bsc#991080). - CVE-2016-6490: Infinite loop in the virtio framework. A privileged user inside the guest could have used this flaw to crash the Qemu instance on the host resulting in DoS (bsc#991466). - CVE-2016-6833: Use-after-free issue in the VMWARE VMXNET3 NIC device support. A privileged user inside guest could have used this issue to crash the Qemu instance resulting in DoS (bsc#994774). - CVE-2016-6836: VMWARE VMXNET3 NIC device support was leaging information leakage. A privileged user inside guest could have used this to leak host memory bytes to a guest (bsc#994760). - CVE-2016-6888: Integer overflow in packet initialisation in VMXNET3 device driver. A privileged user inside guest could have used this flaw to crash the Qemu instance resulting in DoS (bsc#994771). - CVE-2016-7116: Host directory sharing via Plan 9 File System(9pfs) was vulnerable to a directory/path traversal issue. A privileged user inside guest could have used this flaw to access undue files on the host (bsc#996441). - CVE-2016-7155: In the VMWARE PVSCSI paravirtual SCSI bus a OOB access and/or infinite loop issue could have allowed a privileged user inside guest to crash the Qemu process resulting in DoS (bsc#997858). - CVE-2016-7156: In the VMWARE PVSCSI paravirtual SCSI bus a infinite loop issue could have allowed a privileged user inside guest to crash the Qemu process resulting in DoS (bsc#997859). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 94758 published 2016-11-14 reporter This script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/94758 title SUSE SLES12 Security Update : qemu (SUSE-SU-2016:2781-1) NASL family Debian Local Security Checks NASL id DEBIAN_DSA-3361.NASL description Several vulnerabilities were discovered in qemu, a fast processor emulator. - CVE-2015-5278 Qinghao Tang of QIHU 360 Inc. discovered an infinite loop issue in the NE2000 NIC emulation. A privileged guest user could use this flaw to mount a denial of service (QEMU process crash). - CVE-2015-5279 Qinghao Tang of QIHU 360 Inc. discovered a heap buffer overflow flaw in the NE2000 NIC emulation. A privileged guest user could use this flaw to mount a denial of service (QEMU process crash), or potentially to execute arbitrary code on the host with the privileges of the hosting QEMU process. - CVE-2015-6815 Qinghao Tang of QIHU 360 Inc. discovered an infinite loop issue in the e1000 NIC emulation. A privileged guest user could use this flaw to mount a denial of service (QEMU process crash). - CVE-2015-6855 Qinghao Tang of QIHU 360 Inc. discovered a flaw in the IDE subsystem in QEMU occurring while executing IDE last seen 2020-06-01 modified 2020-06-02 plugin id 86023 published 2015-09-21 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86023 title Debian DSA-3361-1 : qemu - security update NASL family SuSE Local Security Checks NASL id OPENSUSE-2015-729.NASL description xen was updated to fix 13 security issues. These security issues were fixed : - CVE-2015-7972: Populate-on-demand balloon size inaccuracy can crash guests (bsc#951845). - CVE-2015-7969: Leak of main per-domain vcpu pointer array (DoS) (bsc#950703). - CVE-2015-7969: Leak of per-domain profiling-related vcpu pointer array (DoS) (bsc#950705). - CVE-2015-7971: Some pmu and profiling hypercalls log without rate limiting (bsc#950706). - CVE-2015-4037: Insecure temporary file use in /net/slirp.c (bsc#932267). - CVE-2014-0222: Validate L2 table size to avoid integer overflows (bsc#877642). - CVE-2015-7835: Uncontrolled creation of large page mappings by PV guests (bsc#950367). - CVE-2015-7311: libxl fails to honour readonly flag on disks with qemu-xen (bsc#947165). - CVE-2015-5165: QEMU leak of uninitialized heap memory in rtl8139 device model (bsc#939712). - CVE-2015-5166: Use after free in QEMU/Xen block unplug protocol (bsc#939709). - CVE-2015-5239: Integer overflow in vnc_client_read() and protocol_client_msg() (bsc#944463). - CVE-2015-6815: e1000: infinite loop issue (bsc#944697). - CVE-2015-5154: Host code execution via IDE subsystem CD-ROM (bsc#938344). This non-security issues was fixed : - bsc#941074: VmError: Device 51728 (vbd) could not be connected. Hotplug scripts not working. last seen 2020-06-05 modified 2015-11-13 plugin id 86863 published 2015-11-13 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86863 title openSUSE Security Update : xen (openSUSE-2015-729) NASL family Fedora Local Security Checks NASL id FEDORA_2015-EFC1D7BA5E.NASL description ui/vnc: limit client_cut_text msg payload size [CVE-2015-5239] (#1259504), e1000: Avoid infinite loop in processing transmit descriptor [CVE-2015-6815] (#1260224), net: add checks to validate ring buffer pointers [CVE-2015-5279] (#1263278), net: avoid infinite loop when receiving packets [CVE-2015-5278] (#1263281), qemu buffer overflow in virtio-serial [CVE-2015-5745] (#1251354) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-05 modified 2016-03-04 plugin id 89456 published 2016-03-04 reporter This script is Copyright (C) 2016-2020 Tenable Network Security, Inc. source https://www.tenable.com/plugins/nessus/89456 title Fedora 22 : xen-4.5.1-9.fc22 (2015-efc1d7ba5e) NASL family SuSE Local Security Checks NASL id SUSE_SU-2016-2628-1.NASL description kvm was updated to fix 16 security issues. These security issues were fixed : - CVE-2015-6815: e1000 NIC emulation support was vulnerable to an infinite loop issue. A privileged user inside guest could have used this flaw to crash the Qemu instance resulting in DoS. (bsc#944697). - CVE-2016-2391: The ohci_bus_start function in the USB OHCI emulation support (hw/usb/hcd-ohci.c) in QEMU allowed local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors related to multiple eof_timers (bsc#967013). - CVE-2016-2392: The is_rndis function in the USB Net device emulator (hw/usb/dev-network.c) in QEMU did not properly validate USB configuration descriptor objects, which allowed local guest OS administrators to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving a remote NDIS control message packet (bsc#967012). - CVE-2016-4453: The vmsvga_fifo_run function in hw/display/vmware_vga.c in QEMU allowed local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) via a VGA command (bsc#982223). - CVE-2016-4454: The vmsvga_fifo_read_raw function in hw/display/vmware_vga.c in QEMU allowed local guest OS administrators to obtain sensitive host memory information or cause a denial of service (QEMU process crash) by changing FIFO registers and issuing a VGA command, which triggers an out-of-bounds read (bsc#982222). - CVE-2016-5105: The megasas_dcmd_cfg_read function in hw/scsi/megasas.c in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, used an uninitialized variable, which allowed local guest administrators to read host memory via vectors involving a MegaRAID Firmware Interface (MFI) command (bsc#982017). - CVE-2016-5106: The megasas_dcmd_set_properties function in hw/scsi/megasas.c in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allowed local guest administrators to cause a denial of service (out-of-bounds write access) via vectors involving a MegaRAID Firmware Interface (MFI) command (bsc#982018). - CVE-2016-5107: The megasas_lookup_frame function in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allowed local guest OS administrators to cause a denial of service (out-of-bounds read and crash) via unspecified vectors (bsc#982019). - CVE-2016-5126: Heap-based buffer overflow in the iscsi_aio_ioctl function in block/iscsi.c in QEMU allowed local guest OS users to cause a denial of service (QEMU process crash) or possibly execute arbitrary code via a crafted iSCSI asynchronous I/O ioctl call (bsc#982285). - CVE-2016-5238: The get_cmd function in hw/scsi/esp.c in QEMU allowed local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) via vectors related to reading from the information transfer buffer in non-DMA mode (bsc#982959). - CVE-2016-5337: The megasas_ctrl_get_info function in hw/scsi/megasas.c in QEMU allowed local guest OS administrators to obtain sensitive host memory information via vectors related to reading device control information (bsc#983961). - CVE-2016-5338: The (1) esp_reg_read and (2) esp_reg_write functions in hw/scsi/esp.c in QEMU allowed local guest OS administrators to cause a denial of service (QEMU process crash) or execute arbitrary code on the QEMU host via vectors related to the information transfer buffer (bsc#983982). - CVE-2016-5403: The virtqueue_pop function in hw/virtio/virtio.c in QEMU allowed local guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) by submitting requests without waiting for completion (bsc#991080). - CVE-2016-6490: Infinite loop in the virtio framework. A privileged user inside the guest could have used this flaw to crash the Qemu instance on the host resulting in DoS (bsc#991466). - CVE-2016-7116: Host directory sharing via Plan 9 File System(9pfs) was vulnerable to a directory/path traversal issue. A privileged user inside guest could have used this flaw to access undue files on the host (bsc#996441). - CVE-2014-7815: The set_pixel_format function in ui/vnc.c in QEMU allowed remote attackers to cause a denial of service (crash) via a small bytes_per_pixel value (bsc#902737). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues. last seen 2020-06-01 modified 2020-06-02 plugin id 94283 published 2016-10-26 reporter This script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/94283 title SUSE SLES11 Security Update : kvm (SUSE-SU-2016:2628-1) NASL family Debian Local Security Checks NASL id DEBIAN_DSA-3362.NASL description Several vulnerabilities were discovered in qemu-kvm, a full virtualization solution on x86 hardware. - CVE-2015-5278 Qinghao Tang of QIHU 360 Inc. discovered an infinite loop issue in the NE2000 NIC emulation. A privileged guest user could use this flaw to mount a denial of service (QEMU process crash). - CVE-2015-5279 Qinghao Tang of QIHU 360 Inc. discovered a heap buffer overflow flaw in the NE2000 NIC emulation. A privileged guest user could use this flaw to mount a denial of service (QEMU process crash), or potentially to execute arbitrary code on the host with the privileges of the hosting QEMU process. - CVE-2015-6815 Qinghao Tang of QIHU 360 Inc. discovered an infinite loop issue in the e1000 NIC emulation. A privileged guest user could use this flaw to mount a denial of service (QEMU process crash). - CVE-2015-6855 Qinghao Tang of QIHU 360 Inc. discovered a flaw in the IDE subsystem in QEMU occurring while executing IDE last seen 2020-06-01 modified 2020-06-02 plugin id 86024 published 2015-09-21 reporter This script is Copyright (C) 2015-2020 and is owned by Tenable, Inc. or an Affiliate thereof. source https://www.tenable.com/plugins/nessus/86024 title Debian DSA-3362-1 : qemu-kvm - security update
References
- http://lists.fedoraproject.org/pipermail/package-announce/2015-October/168077.html
- http://lists.fedoraproject.org/pipermail/package-announce/2015-October/168077.html
- http://lists.fedoraproject.org/pipermail/package-announce/2015-October/168646.html
- http://lists.fedoraproject.org/pipermail/package-announce/2015-October/168646.html
- http://lists.fedoraproject.org/pipermail/package-announce/2015-October/168671.html
- http://lists.fedoraproject.org/pipermail/package-announce/2015-October/168671.html
- http://lists.opensuse.org/opensuse-security-announce/2015-10/msg00026.html
- http://lists.opensuse.org/opensuse-security-announce/2015-10/msg00026.html
- http://lists.opensuse.org/opensuse-security-announce/2015-11/msg00005.html
- http://lists.opensuse.org/opensuse-security-announce/2015-11/msg00005.html
- http://lists.opensuse.org/opensuse-security-announce/2015-11/msg00011.html
- http://lists.opensuse.org/opensuse-security-announce/2015-11/msg00011.html
- http://www.openwall.com/lists/oss-security/2015/09/04/4
- http://www.openwall.com/lists/oss-security/2015/09/04/4
- http://www.openwall.com/lists/oss-security/2015/09/05/5
- http://www.openwall.com/lists/oss-security/2015/09/05/5
- http://www.ubuntu.com/usn/USN-2745-1
- http://www.ubuntu.com/usn/USN-2745-1
- https://bugzilla.redhat.com/show_bug.cgi?id=1260076
- https://bugzilla.redhat.com/show_bug.cgi?id=1260076
- https://lists.gnu.org/archive/html/qemu-devel/2015-09/msg01199.html
- https://lists.gnu.org/archive/html/qemu-devel/2015-09/msg01199.html
- https://lists.gnu.org/archive/html/qemu-devel/2015-09/msg05832.html
- https://lists.gnu.org/archive/html/qemu-devel/2015-09/msg05832.html
- https://www.arista.com/en/support/advisories-notices/security-advisories/1188-security-advisory-14
- https://www.arista.com/en/support/advisories-notices/security-advisories/1188-security-advisory-14