Vulnerabilities > CVE-2010-4021 - Configuration vulnerability in MIT Kerberos 5 1.7

047910
CVSS 0.0 - NONE
Attack vector
UNKNOWN
Attack complexity
UNKNOWN
Privileges required
UNKNOWN
Confidentiality impact
UNKNOWN
Integrity impact
UNKNOWN
Availability impact
UNKNOWN
mit
CWE-16
nessus
NVD
Published: 2010-12-02
Updated: 2020-01-21

Summary

The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) 1.7 does not properly restrict the use of TGT credentials for armoring TGS requests, which might allow remote authenticated users to impersonate a client by rewriting an inner request, aka a "KrbFastReq forgery issue."

Vulnerable Configurations

Part Description Count
Application
Mit
1

Common Weakness Enumeration (CWE)

Nessus

  • NASL familyRed Hat Local Security Checks
    NASL idREDHAT-RHSA-2010-0925.NASL
    descriptionUpdated krb5 packages that fix multiple security issues and one bug are now available for Red Hat Enterprise Linux 6. The Red Hat Security Response Team has rated this update as having important security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section. Kerberos is a network authentication system which allows clients and servers to authenticate to each other using symmetric encryption and a trusted third party, the Key Distribution Center (KDC). Multiple checksum validation flaws were discovered in the MIT Kerberos implementation. A remote attacker could use these flaws to tamper with certain Kerberos protocol packets and, possibly, bypass authentication or authorization mechanisms and escalate their privileges. (CVE-2010-1323, CVE-2010-1324, CVE-2010-4020) Red Hat would like to thank the MIT Kerberos Team for reporting these issues. This update also fixes the following bug : * When attempting to perform PKINIT pre-authentication, if the client had more than one possible candidate certificate the client could fail to select the certificate and key to use. This usually occurred if certificate selection was configured to use the value of the keyUsage extension, or if any of the candidate certificates did not contain a subjectAltName extension. Consequently, the client attempted to perform pre-authentication using a different (usually password-based) mechanism. (BZ#644825) All krb5 users should upgrade to these updated packages, which contain backported patches to correct these issues. After installing the updated packages, the krb5kdc daemon will be restarted automatically.
    last seen2020-06-01
    modified2020-06-02
    plugin id50852
    published2010-12-01
    reporterThis script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/50852
    titleRHEL 6 : krb5 (RHSA-2010:0925)
    code
    #%NASL_MIN_LEVEL 80502
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were  
# extracted from Red Hat Security Advisory RHSA-2010:0925. The text 
# itself is copyright (C) Red Hat, Inc.
#

include("compat.inc");

if (description)
{
  script_id(50852);
  script_version ("1.26");
  script_cvs_date("Date: 2019/10/25 13:36:15");

  script_cve_id("CVE-2010-1323", "CVE-2010-1324", "CVE-2010-4020", "CVE-2010-4021");
  script_bugtraq_id(45116, 45117, 45118);
  script_xref(name:"RHSA", value:"2010:0925");

  script_name(english:"RHEL 6 : krb5 (RHSA-2010:0925)");
  script_summary(english:"Checks the rpm output for the updated packages");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote Red Hat host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"Updated krb5 packages that fix multiple security issues and one bug
are now available for Red Hat Enterprise Linux 6.

The Red Hat Security Response Team has rated this update as having
important security impact. Common Vulnerability Scoring System (CVSS)
base scores, which give detailed severity ratings, are available for
each vulnerability from the CVE links in the References section.

Kerberos is a network authentication system which allows clients and
servers to authenticate to each other using symmetric encryption and a
trusted third party, the Key Distribution Center (KDC).

Multiple checksum validation flaws were discovered in the MIT Kerberos
implementation. A remote attacker could use these flaws to tamper with
certain Kerberos protocol packets and, possibly, bypass authentication
or authorization mechanisms and escalate their privileges.
(CVE-2010-1323, CVE-2010-1324, CVE-2010-4020)

Red Hat would like to thank the MIT Kerberos Team for reporting these
issues.

This update also fixes the following bug :

* When attempting to perform PKINIT pre-authentication, if the client
had more than one possible candidate certificate the client could fail
to select the certificate and key to use. This usually occurred if
certificate selection was configured to use the value of the keyUsage
extension, or if any of the candidate certificates did not contain a
subjectAltName extension. Consequently, the client attempted to
perform pre-authentication using a different (usually password-based)
mechanism. (BZ#644825)

All krb5 users should upgrade to these updated packages, which contain
backported patches to correct these issues. After installing the
updated packages, the krb5kdc daemon will be restarted automatically."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://access.redhat.com/security/cve/cve-2010-1323"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://access.redhat.com/security/cve/cve-2010-1324"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://access.redhat.com/security/cve/cve-2010-4020"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"http://web.mit.edu/Kerberos/advisories/MITKRB5-SA-2010-007.txt"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://access.redhat.com/errata/RHSA-2010:0925"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:N");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-libs");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-pkinit-openssl");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-server");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-server-ldap");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-workstation");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:redhat:enterprise_linux:6");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:redhat:enterprise_linux:6.0");

  script_set_attribute(attribute:"vuln_publication_date", value:"2010/12/02");
  script_set_attribute(attribute:"patch_publication_date", value:"2010/11/30");
  script_set_attribute(attribute:"plugin_publication_date", value:"2010/12/01");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Red Hat Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list", "Host/cpu");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("misc_func.inc");
include("rpm.inc");

if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/RedHat/release");
if (isnull(release) || "Red Hat" >!< release) audit(AUDIT_OS_NOT, "Red Hat");
os_ver = pregmatch(pattern: "Red Hat Enterprise Linux.*release ([0-9]+(\.[0-9]+)?)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Red Hat");
os_ver = os_ver[1];
if (! preg(pattern:"^6([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Red Hat 6.x", "Red Hat " + os_ver);

if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "s390" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Red Hat", cpu);

yum_updateinfo = get_kb_item("Host/RedHat/yum-updateinfo");
if (!empty_or_null(yum_updateinfo)) 
{
  rhsa = "RHSA-2010:0925";
  yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);
  if (!empty_or_null(yum_report))
  {
    security_report_v4(
      port       : 0,
      severity   : SECURITY_WARNING,
      extra      : yum_report 
    );
    exit(0);
  }
  else
  {
    audit_message = "affected by Red Hat security advisory " + rhsa;
    audit(AUDIT_OS_NOT, audit_message);
  }
}
else
{
  flag = 0;
  if (rpm_check(release:"RHEL6", reference:"krb5-debuginfo-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", reference:"krb5-devel-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", reference:"krb5-libs-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"i686", reference:"krb5-pkinit-openssl-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"krb5-pkinit-openssl-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"krb5-pkinit-openssl-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"i686", reference:"krb5-server-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"krb5-server-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"krb5-server-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", reference:"krb5-server-ldap-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"i686", reference:"krb5-workstation-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"s390x", reference:"krb5-workstation-1.8.2-3.el6_0.3")) flag++;

  if (rpm_check(release:"RHEL6", cpu:"x86_64", reference:"krb5-workstation-1.8.2-3.el6_0.3")) flag++;


  if (flag)
  {
    security_report_v4(
      port       : 0,
      severity   : SECURITY_WARNING,
      extra      : rpm_report_get() + redhat_report_package_caveat()
    );
    exit(0);
  }
  else
  {
    tested = pkg_tests_get();
    if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
    else audit(AUDIT_PACKAGE_NOT_INSTALLED, "krb5-debuginfo / krb5-devel / krb5-libs / krb5-pkinit-openssl / etc");
  }
}
  • NASL familyUbuntu Local Security Checks
    NASL idUBUNTU_USN-1030-1.NASL
    descriptionIt was discovered that Kerberos did not properly determine the acceptability of certain checksums. A remote attacker could use certain checksums to alter the prompt message, modify a response to a Key Distribution Center (KDC) or forge a KRB-SAFE message. (CVE-2010-1323) It was discovered that Kerberos did not properly determine the acceptability of certain checksums. A remote attacker could use certain checksums to forge GSS tokens or gain privileges. This issue only affected Ubuntu 9.10, 10.04 LTS and 10.10. (CVE-2010-1324) It was discovered that Kerberos did not reject RC4 key-derivation checksums. An authenticated remote user could use this issue to forge AD-SIGNEDPATH or AD-KDC-ISSUED signatures and possibly gain privileges. This issue only affected Ubuntu 10.04 LTS and 10.10. (CVE-2010-4020) It was discovered that Kerberos did not properly restrict the use of TGT credentials for armoring TGS requests. A remote authenticated user could use this flaw to impersonate a client. This issue only affected Ubuntu 9.10. (CVE-2010-4021). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id51116
    published2010-12-10
    reporterUbuntu Security Notice (C) 2010-2019 Canonical, Inc. / NASL script (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/51116
    titleUbuntu 6.06 LTS / 8.04 LTS / 9.10 / 10.04 LTS / 10.10 : krb5 vulnerabilities (USN-1030-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from Ubuntu Security Notice USN-1030-1. The text 
# itself is copyright (C) Canonical, Inc. See 
# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered 
# trademark of Canonical, Inc.
#

include("compat.inc");

if (description)
{
  script_id(51116);
  script_version("1.16");
  script_cvs_date("Date: 2019/09/19 12:54:26");

  script_cve_id("CVE-2010-1323", "CVE-2010-1324", "CVE-2010-4020", "CVE-2010-4021");
  script_bugtraq_id(45116, 45117, 45118, 45122);
  script_xref(name:"USN", value:"1030-1");

  script_name(english:"Ubuntu 6.06 LTS / 8.04 LTS / 9.10 / 10.04 LTS / 10.10 : krb5 vulnerabilities (USN-1030-1)");
  script_summary(english:"Checks dpkg output for updated packages.");

  script_set_attribute(
    attribute:"synopsis", 
    value:
"The remote Ubuntu host is missing one or more security-related
patches."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"It was discovered that Kerberos did not properly determine the
acceptability of certain checksums. A remote attacker could use
certain checksums to alter the prompt message, modify a response to a
Key Distribution Center (KDC) or forge a KRB-SAFE message.
(CVE-2010-1323)

It was discovered that Kerberos did not properly determine the
acceptability of certain checksums. A remote attacker could use
certain checksums to forge GSS tokens or gain privileges. This issue
only affected Ubuntu 9.10, 10.04 LTS and 10.10. (CVE-2010-1324)

It was discovered that Kerberos did not reject RC4 key-derivation
checksums. An authenticated remote user could use this issue to forge
AD-SIGNEDPATH or AD-KDC-ISSUED signatures and possibly gain
privileges. This issue only affected Ubuntu 10.04 LTS and 10.10.
(CVE-2010-4020)

It was discovered that Kerberos did not properly restrict the use of
TGT credentials for armoring TGS requests. A remote authenticated user
could use this flaw to impersonate a client. This issue only affected
Ubuntu 9.10. (CVE-2010-4021).

Note that Tenable Network Security has extracted the preceding
description block directly from the Ubuntu security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://usn.ubuntu.com/1030-1/"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:N");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-admin-server");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-clients");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-doc");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-ftpd");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-kdc");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-kdc-ldap");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-multidev");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-pkinit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-rsh-server");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-telnetd");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:krb5-user");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libgssapi-krb5-2");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libgssrpc4");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libk5crypto3");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkadm55");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkadm5clnt-mit7");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkadm5clnt6");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkadm5srv-mit7");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkadm5srv6");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkdb5-4");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkrb5-3");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkrb5-dbg");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkrb5-dev");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkrb53");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libkrb5support0");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:10.04:-:lts");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:10.10");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:6.06:-:lts");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:8.04:-:lts");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:9.10");

  script_set_attribute(attribute:"vuln_publication_date", value:"2010/12/02");
  script_set_attribute(attribute:"patch_publication_date", value:"2010/12/09");
  script_set_attribute(attribute:"plugin_publication_date", value:"2010/12/10");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"Ubuntu Security Notice (C) 2010-2019 Canonical, Inc. / NASL script (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Ubuntu Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/cpu", "Host/Ubuntu", "Host/Ubuntu/release", "Host/Debian/dpkg-l");

  exit(0);
}


include("audit.inc");
include("ubuntu.inc");
include("misc_func.inc");

if ( ! get_kb_item("Host/local_checks_enabled") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/Ubuntu/release");
if ( isnull(release) ) audit(AUDIT_OS_NOT, "Ubuntu");
release = chomp(release);
if (! preg(pattern:"^(6\.06|8\.04|9\.10|10\.04|10\.10)$", string:release)) audit(AUDIT_OS_NOT, "Ubuntu 6.06 / 8.04 / 9.10 / 10.04 / 10.10", "Ubuntu " + release);
if ( ! get_kb_item("Host/Debian/dpkg-l") ) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Ubuntu", cpu);

flag = 0;

if (ubuntu_check(osver:"6.06", pkgname:"krb5-admin-server", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-clients", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-doc", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-ftpd", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-kdc", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-rsh-server", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-telnetd", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"krb5-user", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"libkadm55", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"libkrb5-dev", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"6.06", pkgname:"libkrb53", pkgver:"1.4.3-5ubuntu0.12")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-admin-server", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-clients", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-doc", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-ftpd", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-kdc", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-pkinit", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-rsh-server", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-telnetd", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"krb5-user", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"libkadm55", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"libkrb5-dbg", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"libkrb5-dev", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"8.04", pkgname:"libkrb53", pkgver:"1.6.dfsg.3~beta1-2ubuntu1.6")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-admin-server", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-clients", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-doc", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-ftpd", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-kdc", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-kdc-ldap", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-pkinit", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-rsh-server", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-telnetd", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"krb5-user", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libgssapi-krb5-2", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libgssrpc4", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libk5crypto3", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkadm5clnt6", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkadm5srv6", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkdb5-4", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkrb5-3", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkrb5-dbg", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkrb5-dev", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"9.10", pkgname:"libkrb5support0", pkgver:"1.7dfsg~beta3-1ubuntu0.7")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-admin-server", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-doc", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-kdc", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-kdc-ldap", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-multidev", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-pkinit", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"krb5-user", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libgssapi-krb5-2", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libgssrpc4", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libk5crypto3", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkadm5clnt-mit7", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkadm5srv-mit7", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkdb5-4", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkrb5-3", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkrb5-dbg", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkrb5-dev", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.04", pkgname:"libkrb5support0", pkgver:"1.8.1+dfsg-2ubuntu0.4")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-admin-server", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-doc", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-kdc", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-kdc-ldap", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-multidev", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-pkinit", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"krb5-user", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libgssapi-krb5-2", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libgssrpc4", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libk5crypto3", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkadm5clnt-mit7", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkadm5srv-mit7", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkdb5-4", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkrb5-3", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkrb5-dbg", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkrb5-dev", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;
if (ubuntu_check(osver:"10.10", pkgname:"libkrb5support0", pkgver:"1.8.1+dfsg-5ubuntu0.2")) flag++;

if (flag)
{
  security_report_v4(
    port       : 0,
    severity   : SECURITY_WARNING,
    extra      : ubuntu_report_get()
  );
  exit(0);
}
else
{
  tested = ubuntu_pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "krb5-admin-server / krb5-clients / krb5-doc / krb5-ftpd / krb5-kdc / etc");
}
  • NASL familyFreeBSD Local Security Checks
    NASL idFREEBSD_PKG_4CCBD40D03F711E0BF50001A926C7637.NASL
    descriptionThe MIT Kerberos team reports : MIT krb5 KDC may issue tickets not requested by a client, based on an attacker-chosen KrbFastArmoredReq. An authenticated remote attacker that controls a legitimate service principal could obtain a valid service ticket to itself containing valid KDC-generated authorization data for a client whose TGS-REQ it has intercepted. The attacker could then use this ticket for S4U2Proxy to impersonate the targeted client even if the client never authenticated to the subverted service. The vulnerable configuration is believed to be rare.
    last seen2020-06-01
    modified2020-06-02
    plugin id51103
    published2010-12-10
    reporterThis script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/51103
    titleFreeBSD : krb5 -- client impersonation vulnerability (4ccbd40d-03f7-11e0-bf50-001a926c7637)
    code
    #%NASL_MIN_LEVEL 80502
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were  
# extracted from the FreeBSD VuXML database :
#
# Copyright 2003-2018 Jacques Vidrine and contributors
#
# Redistribution and use in source (VuXML) and 'compiled' forms (SGML,
# HTML, PDF, PostScript, RTF and so forth) with or without modification,
# are permitted provided that the following conditions are met:
# 1. Redistributions of source code (VuXML) must retain the above
#    copyright notice, this list of conditions and the following
#    disclaimer as the first lines of this file unmodified.
# 2. Redistributions in compiled form (transformed to other DTDs,
#    published online in any format, converted to PDF, PostScript,
#    RTF and other formats) must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer
#    in the documentation and/or other materials provided with the
#    distribution.
# 
# THIS DOCUMENTATION IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENTATION,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

include("compat.inc");

if (description)
{
  script_id(51103);
  script_version("1.12");
  script_cvs_date("Date: 2019/08/02 13:32:40");

  script_cve_id("CVE-2010-4021");
  script_bugtraq_id(45122);

  script_name(english:"FreeBSD : krb5 -- client impersonation vulnerability (4ccbd40d-03f7-11e0-bf50-001a926c7637)");
  script_summary(english:"Checks for updated package in pkg_info output");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote FreeBSD host is missing a security-related update."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"The MIT Kerberos team reports :

MIT krb5 KDC may issue tickets not requested by a client, based on an
attacker-chosen KrbFastArmoredReq.

An authenticated remote attacker that controls a legitimate service
principal could obtain a valid service ticket to itself containing
valid KDC-generated authorization data for a client whose TGS-REQ it
has intercepted. The attacker could then use this ticket for S4U2Proxy
to impersonate the targeted client even if the client never
authenticated to the subverted service. The vulnerable configuration
is believed to be rare."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"http://web.mit.edu/kerberos/advisories/MITKRB5-SA-2010-007.txt"
  );
  # https://vuxml.freebsd.org/freebsd/4ccbd40d-03f7-11e0-bf50-001a926c7637.html
  script_set_attribute(
    attribute:"see_also",
    value:"http://www.nessus.org/u?a15dac10"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected package.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:H/Au:S/C:N/I:P/A:N");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:freebsd:freebsd:krb5");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:freebsd:freebsd");

  script_set_attribute(attribute:"vuln_publication_date", value:"2010/11/30");
  script_set_attribute(attribute:"patch_publication_date", value:"2010/12/09");
  script_set_attribute(attribute:"plugin_publication_date", value:"2010/12/10");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"FreeBSD Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/FreeBSD/release", "Host/FreeBSD/pkg_info");

  exit(0);
}


include("audit.inc");
include("freebsd_package.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
if (!get_kb_item("Host/FreeBSD/release")) audit(AUDIT_OS_NOT, "FreeBSD");
if (!get_kb_item("Host/FreeBSD/pkg_info")) audit(AUDIT_PACKAGE_LIST_MISSING);


flag = 0;

if (pkg_test(save_report:TRUE, pkg:"krb5>=1.7.0<1.7.2")) flag++;

if (flag)
{
  if (report_verbosity > 0) security_note(port:0, extra:pkg_report_get());
  else security_note(0);
  exit(0);
}
else audit(AUDIT_HOST_NOT, "affected");
  • NASL familyRed Hat Local Security Checks
    NASL idREDHAT-RHSA-2010-0926.NASL
    descriptionUpdated krb5 packages that fix multiple security issues are now available for Red Hat Enterprise Linux 4 and 5. The Red Hat Security Response Team has rated this update as having moderate security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section. Kerberos is a network authentication system which allows clients and servers to authenticate to each other using symmetric encryption and a trusted third party, the Key Distribution Center (KDC). Multiple checksum validation flaws were discovered in the MIT Kerberos implementation. A remote attacker could use these flaws to tamper with certain Kerberos protocol packets and, possibly, bypass authentication mechanisms in certain configurations using Single-use Authentication Mechanisms. (CVE-2010-1323) Red Hat would like to thank the MIT Kerberos Team for reporting these issues. All krb5 users should upgrade to these updated packages, which contain a backported patch to correct these issues. After installing the updated packages, the krb5kdc daemon will be restarted automatically.
    last seen2020-06-01
    modified2020-06-02
    plugin id50853
    published2010-12-01
    reporterThis script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/50853
    titleRHEL 4 / 5 : krb5 (RHSA-2010:0926)
    code
    #%NASL_MIN_LEVEL 80502
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were  
# extracted from Red Hat Security Advisory RHSA-2010:0926. The text 
# itself is copyright (C) Red Hat, Inc.
#

include("compat.inc");

if (description)
{
  script_id(50853);
  script_version ("1.29");
  script_cvs_date("Date: 2019/10/25 13:36:15");

  script_cve_id("CVE-2010-1323", "CVE-2010-1324", "CVE-2010-4020", "CVE-2010-4021");
  script_bugtraq_id(45118);
  script_xref(name:"RHSA", value:"2010:0926");

  script_name(english:"RHEL 4 / 5 : krb5 (RHSA-2010:0926)");
  script_summary(english:"Checks the rpm output for the updated packages");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote Red Hat host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"Updated krb5 packages that fix multiple security issues are now
available for Red Hat Enterprise Linux 4 and 5.

The Red Hat Security Response Team has rated this update as having
moderate security impact. A Common Vulnerability Scoring System (CVSS)
base score, which gives a detailed severity rating, is available from
the CVE link in the References section.

Kerberos is a network authentication system which allows clients and
servers to authenticate to each other using symmetric encryption and a
trusted third party, the Key Distribution Center (KDC).

Multiple checksum validation flaws were discovered in the MIT Kerberos
implementation. A remote attacker could use these flaws to tamper with
certain Kerberos protocol packets and, possibly, bypass authentication
mechanisms in certain configurations using Single-use Authentication
Mechanisms. (CVE-2010-1323)

Red Hat would like to thank the MIT Kerberos Team for reporting these
issues.

All krb5 users should upgrade to these updated packages, which contain
a backported patch to correct these issues. After installing the
updated packages, the krb5kdc daemon will be restarted automatically."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://access.redhat.com/security/cve/cve-2010-1323"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"http://web.mit.edu/Kerberos/advisories/MITKRB5-SA-2010-007.txt"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://access.redhat.com/errata/RHSA-2010:0926"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:N");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-libs");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-server");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:redhat:enterprise_linux:krb5-workstation");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:redhat:enterprise_linux:4");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:redhat:enterprise_linux:4.8");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:redhat:enterprise_linux:5");

  script_set_attribute(attribute:"vuln_publication_date", value:"2010/12/02");
  script_set_attribute(attribute:"patch_publication_date", value:"2010/11/30");
  script_set_attribute(attribute:"plugin_publication_date", value:"2010/12/01");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Red Hat Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list", "Host/cpu");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("misc_func.inc");
include("rpm.inc");

if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/RedHat/release");
if (isnull(release) || "Red Hat" >!< release) audit(AUDIT_OS_NOT, "Red Hat");
os_ver = pregmatch(pattern: "Red Hat Enterprise Linux.*release ([0-9]+(\.[0-9]+)?)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Red Hat");
os_ver = os_ver[1];
if (! preg(pattern:"^(4|5)([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Red Hat 4.x / 5.x", "Red Hat " + os_ver);

if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$" && "s390" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Red Hat", cpu);

yum_updateinfo = get_kb_item("Host/RedHat/yum-updateinfo");
if (!empty_or_null(yum_updateinfo)) 
{
  rhsa = "RHSA-2010:0926";
  yum_report = redhat_generate_yum_updateinfo_report(rhsa:rhsa);
  if (!empty_or_null(yum_report))
  {
    security_report_v4(
      port       : 0,
      severity   : SECURITY_WARNING,
      extra      : yum_report 
    );
    exit(0);
  }
  else
  {
    audit_message = "affected by Red Hat security advisory " + rhsa;
    audit(AUDIT_OS_NOT, audit_message);
  }
}
else
{
  flag = 0;
  if (rpm_check(release:"RHEL4", reference:"krb5-devel-1.3.4-62.el4_8.3")) flag++;

  if (rpm_check(release:"RHEL4", reference:"krb5-libs-1.3.4-62.el4_8.3")) flag++;

  if (rpm_check(release:"RHEL4", reference:"krb5-server-1.3.4-62.el4_8.3")) flag++;

  if (rpm_check(release:"RHEL4", reference:"krb5-workstation-1.3.4-62.el4_8.3")) flag++;


  if (rpm_check(release:"RHEL5", reference:"krb5-devel-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", reference:"krb5-libs-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", cpu:"i386", reference:"krb5-server-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", cpu:"s390x", reference:"krb5-server-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", cpu:"x86_64", reference:"krb5-server-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", cpu:"i386", reference:"krb5-workstation-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", cpu:"s390x", reference:"krb5-workstation-1.6.1-36.el5_5.6")) flag++;

  if (rpm_check(release:"RHEL5", cpu:"x86_64", reference:"krb5-workstation-1.6.1-36.el5_5.6")) flag++;


  if (flag)
  {
    security_report_v4(
      port       : 0,
      severity   : SECURITY_WARNING,
      extra      : rpm_report_get() + redhat_report_package_caveat()
    );
    exit(0);
  }
  else
  {
    tested = pkg_tests_get();
    if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
    else audit(AUDIT_PACKAGE_NOT_INSTALLED, "krb5-devel / krb5-libs / krb5-server / krb5-workstation");
  }
}
  • NASL familySuSE Local Security Checks
    NASL idSUSE_11_2_KRB5-101201.NASL
    descriptionMultiple remote vulnerabilities in the MIT krb5 package have been fixed. They affect client as well as server software. CVE-2010-1323, CVE-2010-1324,CVE-2010-4020 and CVE-2010-4021 have been assigned to this issue.
    last seen2020-06-01
    modified2020-06-02
    plugin id53742
    published2011-05-05
    reporterThis script is Copyright (C) 2011-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/53742
    titleopenSUSE Security Update : krb5 (openSUSE-SU-2010:1053-1)
    code
    #%NASL_MIN_LEVEL 80502
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from openSUSE Security Update krb5-3612.
#
# The text description of this plugin is (C) SUSE LLC.
#

include("compat.inc");

if (description)
{
  script_id(53742);
  script_version("1.8");
  script_cvs_date("Date: 2019/10/25 13:36:38");

  script_cve_id("CVE-2010-1323", "CVE-2010-1324", "CVE-2010-4020", "CVE-2010-4021");

  script_name(english:"openSUSE Security Update : krb5 (openSUSE-SU-2010:1053-1)");
  script_summary(english:"Check for the krb5-3612 patch");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote openSUSE host is missing a security update."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"Multiple remote vulnerabilities in the MIT krb5 package have been
fixed. They affect client as well as server software. CVE-2010-1323,
CVE-2010-1324,CVE-2010-4020 and CVE-2010-4021 have been assigned to
this issue."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.novell.com/show_bug.cgi?id=650650"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://lists.opensuse.org/opensuse-updates/2010-12/msg00030.html"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected krb5 packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:N");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-apps-clients");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-apps-servers");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-client");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-devel-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-plugin-kdb-ldap");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-plugin-preauth-pkinit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-server");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:11.2");

  script_set_attribute(attribute:"patch_publication_date", value:"2010/12/01");
  script_set_attribute(attribute:"plugin_publication_date", value:"2011/05/05");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2011-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");

if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
if (release !~ "^(SUSE11\.2)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "11.2", release);
if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

ourarch = get_kb_item("Host/cpu");
if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch);

flag = 0;

if ( rpm_check(release:"SUSE11.2", reference:"krb5-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-apps-clients-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-apps-servers-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-client-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-devel-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-plugin-kdb-ldap-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-plugin-preauth-pkinit-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", reference:"krb5-server-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", cpu:"x86_64", reference:"krb5-32bit-1.7-6.8.1") ) flag++;
if ( rpm_check(release:"SUSE11.2", cpu:"x86_64", reference:"krb5-devel-32bit-1.7-6.8.1") ) flag++;

if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "krb5");
}
  • NASL familySuSE Local Security Checks
    NASL idSUSE_11_3_KRB5-101201.NASL
    descriptionMultiple remote vulnerabilities in the MIT krb5 package have been fixed. They affect client as well as server software. CVE-2010-1323, CVE-2010-1324,CVE-2010-4020 and CVE-2010-4021 have been assigned to this issue.
    last seen2020-06-01
    modified2020-06-02
    plugin id75559
    published2014-06-13
    reporterThis script is Copyright (C) 2014-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/75559
    titleopenSUSE Security Update : krb5 (openSUSE-SU-2010:1053-1)
    code
    #%NASL_MIN_LEVEL 80502
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from openSUSE Security Update krb5-3612.
#
# The text description of this plugin is (C) SUSE LLC.
#

include("compat.inc");

if (description)
{
  script_id(75559);
  script_version("1.5");
  script_cvs_date("Date: 2019/10/25 13:36:39");

  script_cve_id("CVE-2010-1323", "CVE-2010-1324", "CVE-2010-4020", "CVE-2010-4021");

  script_name(english:"openSUSE Security Update : krb5 (openSUSE-SU-2010:1053-1)");
  script_summary(english:"Check for the krb5-3612 patch");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote openSUSE host is missing a security update."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"Multiple remote vulnerabilities in the MIT krb5 package have been
fixed. They affect client as well as server software. CVE-2010-1323,
CVE-2010-1324,CVE-2010-4020 and CVE-2010-4021 have been assigned to
this issue."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.novell.com/show_bug.cgi?id=650650"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://lists.opensuse.org/opensuse-updates/2010-12/msg00030.html"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected krb5 packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:N");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-client");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-devel-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-plugin-kdb-ldap");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-plugin-preauth-pkinit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:krb5-server");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:11.3");

  script_set_attribute(attribute:"patch_publication_date", value:"2010/12/01");
  script_set_attribute(attribute:"plugin_publication_date", value:"2014/06/13");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2014-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");

if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
if (release !~ "^(SUSE11\.3)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "11.3", release);
if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

ourarch = get_kb_item("Host/cpu");
if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch);

flag = 0;

if ( rpm_check(release:"SUSE11.3", reference:"krb5-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", reference:"krb5-client-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", reference:"krb5-devel-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", reference:"krb5-plugin-kdb-ldap-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", reference:"krb5-plugin-preauth-pkinit-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", reference:"krb5-server-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", cpu:"x86_64", reference:"krb5-32bit-1.8.1-5.3.1") ) flag++;
if ( rpm_check(release:"SUSE11.3", cpu:"x86_64", reference:"krb5-devel-32bit-1.8.1-5.3.1") ) flag++;

if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "krb5");
}
  • NASL familyOracle Linux Local Security Checks
    NASL idORACLELINUX_ELSA-2010-0926.NASL
    descriptionFrom Red Hat Security Advisory 2010:0926 : Updated krb5 packages that fix multiple security issues are now available for Red Hat Enterprise Linux 4 and 5. The Red Hat Security Response Team has rated this update as having moderate security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section. Kerberos is a network authentication system which allows clients and servers to authenticate to each other using symmetric encryption and a trusted third party, the Key Distribution Center (KDC). Multiple checksum validation flaws were discovered in the MIT Kerberos implementation. A remote attacker could use these flaws to tamper with certain Kerberos protocol packets and, possibly, bypass authentication mechanisms in certain configurations using Single-use Authentication Mechanisms. (CVE-2010-1323) Red Hat would like to thank the MIT Kerberos Team for reporting these issues. All krb5 users should upgrade to these updated packages, which contain a backported patch to correct these issues. After installing the updated packages, the krb5kdc daemon will be restarted automatically.
    last seen2020-06-01
    modified2020-06-02
    plugin id68152
    published2013-07-12
    reporterThis script is Copyright (C) 2013-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/68152
    titleOracle Linux 4 / 5 : krb5 (ELSA-2010-0926)
    code
    #%NASL_MIN_LEVEL 80502
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from Red Hat Security Advisory RHSA-2010:0926 and 
# Oracle Linux Security Advisory ELSA-2010-0926 respectively.
#

include("compat.inc");

if (description)
{
  script_id(68152);
  script_version("1.11");
  script_cvs_date("Date: 2019/10/25 13:36:09");

  script_cve_id("CVE-2010-1323", "CVE-2010-1324", "CVE-2010-4020", "CVE-2010-4021");
  script_bugtraq_id(45118);
  script_xref(name:"RHSA", value:"2010:0926");

  script_name(english:"Oracle Linux 4 / 5 : krb5 (ELSA-2010-0926)");
  script_summary(english:"Checks rpm output for the updated packages");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote Oracle Linux host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"From Red Hat Security Advisory 2010:0926 :

Updated krb5 packages that fix multiple security issues are now
available for Red Hat Enterprise Linux 4 and 5.

The Red Hat Security Response Team has rated this update as having
moderate security impact. A Common Vulnerability Scoring System (CVSS)
base score, which gives a detailed severity rating, is available from
the CVE link in the References section.

Kerberos is a network authentication system which allows clients and
servers to authenticate to each other using symmetric encryption and a
trusted third party, the Key Distribution Center (KDC).

Multiple checksum validation flaws were discovered in the MIT Kerberos
implementation. A remote attacker could use these flaws to tamper with
certain Kerberos protocol packets and, possibly, bypass authentication
mechanisms in certain configurations using Single-use Authentication
Mechanisms. (CVE-2010-1323)

Red Hat would like to thank the MIT Kerberos Team for reporting these
issues.

All krb5 users should upgrade to these updated packages, which contain
a backported patch to correct these issues. After installing the
updated packages, the krb5kdc daemon will be restarted automatically."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://oss.oracle.com/pipermail/el-errata/2010-November/001751.html"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://oss.oracle.com/pipermail/el-errata/2010-November/001752.html"
  );
  script_set_attribute(attribute:"solution", value:"Update the affected krb5 packages.");
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:P/A:N");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"false");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:linux:krb5-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:linux:krb5-libs");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:linux:krb5-server");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:oracle:linux:krb5-workstation");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:linux:4");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:oracle:linux:5");

  script_set_attribute(attribute:"vuln_publication_date", value:"2010/12/02");
  script_set_attribute(attribute:"patch_publication_date", value:"2010/12/01");
  script_set_attribute(attribute:"plugin_publication_date", value:"2013/07/12");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2013-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Oracle Linux Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/OracleLinux", "Host/RedHat/release", "Host/RedHat/rpm-list");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
if (!get_kb_item("Host/OracleLinux")) audit(AUDIT_OS_NOT, "Oracle Linux");
release = get_kb_item("Host/RedHat/release");
if (isnull(release) || !pregmatch(pattern: "Oracle (?:Linux Server|Enterprise Linux)", string:release)) audit(AUDIT_OS_NOT, "Oracle Linux");
os_ver = pregmatch(pattern: "Oracle (?:Linux Server|Enterprise Linux) .*release ([0-9]+(\.[0-9]+)?)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Oracle Linux");
os_ver = os_ver[1];
if (! preg(pattern:"^(4|5)([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Oracle Linux 4 / 5", "Oracle Linux " + os_ver);

if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && "ia64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Oracle Linux", cpu);

flag = 0;
if (rpm_check(release:"EL4", reference:"krb5-devel-1.3.4-62.el4_8.3")) flag++;
if (rpm_check(release:"EL4", reference:"krb5-libs-1.3.4-62.el4_8.3")) flag++;
if (rpm_check(release:"EL4", reference:"krb5-server-1.3.4-62.el4_8.3")) flag++;
if (rpm_check(release:"EL4", reference:"krb5-workstation-1.3.4-62.el4_8.3")) flag++;

if (rpm_check(release:"EL5", reference:"krb5-devel-1.6.1-36.el5_5.6")) flag++;
if (rpm_check(release:"EL5", reference:"krb5-libs-1.6.1-36.el5_5.6")) flag++;
if (rpm_check(release:"EL5", reference:"krb5-server-1.6.1-36.el5_5.6")) flag++;
if (rpm_check(release:"EL5", reference:"krb5-workstation-1.6.1-36.el5_5.6")) flag++;


if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "krb5-devel / krb5-libs / krb5-server / krb5-workstation");
}
  • NASL familyMisc.
    NASL idVMWARE_VMSA-2011-0007_REMOTE.NASL
    descriptionThe remote VMware ESX / ESXi host is missing a security-related patch. It is, therefore, affected by multiple vulnerabilities : - Multiple forgery vulnerabilities exist in the bundled version of MIT Kerberos 5 (krb5). An attacker can exploit these issues to impersonate a client, escalate privileges, and disclose sensitive information. (CVE-2010-1323, CVE-2010-1324, CVE-2010-4020, CVE-2010-4021) - A local arbitrary code execution vulnerability exists in the Kernel in the do_anonymous_page() function due to improper separation of the stack and the heap. A local attacker can exploit this vulnerability to execute arbitrary code. (CVE-2010-2240) - A denial of service vulnerability exists that allows a remote attacker to exhaust available sockets, preventing further connections. (CVE-2011-1785) - A denial of service vulnerability exists in the bundled version of lsassd in Likewise Open. A remote attacker can exploit this, via an Active Directory login attempt that provides a username containing an invalid byte sequence, to cause a daemon crash. (CVE-2011-1786)
    last seen2020-06-01
    modified2020-06-02
    plugin id89676
    published2016-03-04
    reporterThis script is Copyright (C) 2016-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/89676
    titleVMware ESX / ESXi Multiple Vulnerabilities (VMSA-2011-0007) (remote check)
  • NASL familyVMware ESX Local Security Checks
    NASL idVMWARE_VMSA-2011-0007.NASL
    descriptiona. ESX/ESXi Socket Exhaustion By sending malicious network traffic to an ESXi or ESX host an attacker could exhaust the available sockets which would prevent further connections to the host. In the event a host becomes inaccessible its virtual machines will continue to run and have network connectivity but a reboot of the ESXi or ESX host may be required in order to be able to connect to the host again. ESXi and ESX hosts may intermittently lose connectivity caused by applications that do not correctly close sockets. If this occurs an error message similar to the following may be written to the vpxa log : socket() returns -1 (Cannot allocate memory) An error message similar to the following may be written to the vmkernel logs : socreate(type=2, proto=17) failed with error 55 VMware would like to thank Jimmy Scott at inet-solutions.be for reporting this issue to us. The Common Vulnerabilities and Exposures Project (cve.mitre.org) has assigned the name CVE-2011-1785 to this issue. b. Likewise package update Updates to the vmware-esx-likewise-openldap and vmware-esx-likewise-krb5 packages address several security issues. One of the vulnerabilities is specific to Likewise while the other vulnerabilities are present in the MIT version of krb5. An incorrect assert() call in Likewise may lead to a termination of the Likewise-open lsassd service if a username with an illegal byte sequence is entered for user authentication when logging in to the Active Directory domain of the ESXi/ESX host. This would lead to a denial of service. The MIT-krb5 vulnerabilities are detailed in MITKRB5-SA-2010-007. The Common Vulnerabilities and Exposures project (cve.mitre.org) has assigned the names CVE-2011-1786 (Likewise-only issue), CVE-2010-1324, CVE-2010-1323, CVE-2010-4020, CVE-2010-4021 to these issues. c. ESX third-party update for Service Console kernel The Service Console kernel is updated to include a fix for a security issue. The Common Vulnerabilities and Exposures project (cve.mitre.org) has assigned the name CVE-2010-2240 to this issue.
    last seen2020-06-01
    modified2020-06-02
    plugin id53592
    published2011-04-29
    reporterThis script is Copyright (C) 2011-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/53592
    titleVMSA-2011-0007 : VMware ESXi and ESX Denial of Service and third-party updates for Likewise components and ESX Service Console
  • NASL familyMacOS X Local Security Checks
    NASL idMACOSX_10_6_7.NASL
    descriptionThe remote host is running a version of Mac OS X 10.6.x that is prior to 10.6.7. Mac OS X 10.6.7 contains security fixes for the following products : - AirPort - Apache - AppleScript - ATS - bzip2 - CarbonCore - ClamAV - CoreText - File Quarantine - HFS - ImageIO - Image RAW - Installer - Kerberos - Kernel - Libinfo - libxml - Mailman - PHP - QuickLook - QuickTime - Ruby - Samba - Subversion - Terminal - X11
    last seen2020-06-01
    modified2020-06-02
    plugin id52754
    published2011-03-22
    reporterThis script is Copyright (C) 2011-2018 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/52754
    titleMac OS X 10.6.x < 10.6.7 Multiple Vulnerabilities
  • NASL familySuSE Local Security Checks
    NASL idSUSE_11_KRB5-101117.NASL
    descriptionMultiple remote vulnerabilities in the MIT krb5 package have been fixed. They affect client as well as server software.
    last seen2020-06-01
    modified2020-06-02
    plugin id50974
    published2010-12-03
    reporterThis script is Copyright (C) 2010-2019 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/50974
    titleSuSE 11 / 11.1 Security Update : krb5 (SAT Patch Numbers 3547 / 3549)
  • NASL familyMandriva Local Security Checks
    NASL idMANDRIVA_MDVSA-2010-246.NASL
    descriptionMultiple vulnerabilities were discovered and corrected in krb5 : An unauthenticated remote attacker could alter a SAM-2 challenge, affecting the prompt text seen by the user or the kind of response sent to the KDC. Under some circumstances, this can negate the incremental security benefit of using a single-use authentication mechanism token. An unauthenticated remote attacker has a 1/256 chance of forging KRB-SAFE messages in an application protocol if the targeted pre-existing session uses an RC4 session key. Few application protocols use KRB-SAFE messages (CVE-2010-1323). An unauthenticated remote attacker can forge GSS tokens that are intended to be integrity-protected but unencrypted, if the targeted pre-existing application session uses a DES session key. An authenticated remote attacker can forge PACs if using a KDC that does not filter client-provided PAC data. This can result in privilege escalation against a service that relies on PAC contents to make authorization decisions. An unauthenticated remote attacker has a 1/256 chance of swapping a client-issued KrbFastReq into a different KDC-REQ, if the armor key is RC4. The consequences are believed to be minor (CVE-2010-1324). An authenticated remote attacker that controls a legitimate service principal has a 1/256 chance of forging the AD-SIGNEDPATH signature if the TGT key is RC4, allowing it to use self-generated evidence tickets for S4U2Proxy, instead of tickets obtained from the user or with S4U2Self. Configurations using RC4 for the TGT key are believed to be rare. An authenticated remote attacker has a 1/256 chance of forging AD-KDC-ISSUED signatures on authdata elements in tickets having an RC4 service key, resulting in privilege escalation against a service that relies on these signatures. There are no known uses of the KDC-ISSUED authdata container at this time (CVE-2010-4020. An authenticated remote attacker that controls a legitimate service principal could obtain a valid service ticket to itself containing valid KDC-generated authorization data for a client whose TGS-REQ it has intercepted. The attacker could then use this ticket for S4U2Proxy to impersonate the targeted client even if the client never authenticated to the subverted service. The vulnerable configuration is believed to be rare (CVE-2010-4021). The updated packages have been patched to correct this issue.
    last seen2020-06-01
    modified2020-06-02
    plugin id50849
    published2010-12-01
    reporterThis script is Copyright (C) 2010-2019 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/50849
    titleMandriva Linux Security Advisory : krb5 (MDVSA-2010:246)
  • NASL familySolaris Local Security Checks
    NASL idSOLARIS11_KERBEROS_20130924_2.NASL
    descriptionThe remote Solaris system is missing necessary patches to address security updates : - The merge_authdata function in kdc_authdata.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) 1.8.x before 1.8.4 does not properly manage an index into an authorization-data list, which allows remote attackers to cause a denial of service (daemon crash), or possibly obtain sensitive information, spoof authorization, or execute arbitrary code, via a TGS request that triggers an uninitialized pointer dereference, as demonstrated by a request from a Windows Active Directory client. (CVE-2010-1322) - MIT Kerberos 5 (aka krb5) 1.3.x, 1.4.x, 1.5.x, 1.6.x, 1.7.x, and 1.8.x through 1.8.3 does not properly determine the acceptability of checksums, which might allow remote attackers to modify user-visible prompt text, modify a response to a Key Distribution Center (KDC), or forge a KRB-SAFE message via certain checksums that (1) are unkeyed or (2) use RC4 keys. (CVE-2010-1323) - MIT Kerberos 5 (aka krb5) 1.7.x and 1.8.x through 1.8.3 does not properly determine the acceptability of checksums, which might allow remote attackers to forge GSS tokens, gain privileges, or have unspecified other impact via (1) an unkeyed checksum, (2) an unkeyed PAC checksum, or (3) a KrbFastArmoredReq checksum based on an RC4 key. (CVE-2010-1324) - MIT Kerberos 5 (aka krb5) 1.8.x through 1.8.3 does not reject RC4 key-derivation checksums, which might allow remote authenticated users to forge a (1) AD-SIGNEDPATH or (2) AD-KDC-ISSUED signature, and possibly gain privileges, by leveraging the small key space that results from certain one-byte stream-cipher operations. (CVE-2010-4020) - The Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) 1.7 does not properly restrict the use of TGT credentials for armoring TGS requests, which might allow remote authenticated users to impersonate a client by rewriting an inner request, aka a
    last seen2020-06-01
    modified2020-06-02
    plugin id80653
    published2015-01-19
    reporterThis script is Copyright (C) 2015-2018 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/80653
    titleOracle Solaris Third-Party Patch Update : kerberos (cve_2010_1322_improper_input)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_11_1_KRB5-101201.NASL
    descriptionMultiple remote vulnerabilities in the MIT krb5 package have been fixed. They affect client as well as server software. CVE-2010-1323, CVE-2010-1324,CVE-2010-4020 and CVE-2010-4021 have been assigned to this issue.
    last seen2020-06-01
    modified2020-06-02
    plugin id53672
    published2011-05-05
    reporterThis script is Copyright (C) 2011-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/53672
    titleopenSUSE Security Update : krb5 (openSUSE-SU-2010:1053-1)
  • NASL familyCentOS Local Security Checks
    NASL idCENTOS_RHSA-2010-0926.NASL
    descriptionUpdated krb5 packages that fix multiple security issues are now available for Red Hat Enterprise Linux 4 and 5. The Red Hat Security Response Team has rated this update as having moderate security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section. Kerberos is a network authentication system which allows clients and servers to authenticate to each other using symmetric encryption and a trusted third party, the Key Distribution Center (KDC). Multiple checksum validation flaws were discovered in the MIT Kerberos implementation. A remote attacker could use these flaws to tamper with certain Kerberos protocol packets and, possibly, bypass authentication mechanisms in certain configurations using Single-use Authentication Mechanisms. (CVE-2010-1323) Red Hat would like to thank the MIT Kerberos Team for reporting these issues. All krb5 users should upgrade to these updated packages, which contain a backported patch to correct these issues. After installing the updated packages, the krb5kdc daemon will be restarted automatically.
    last seen2020-06-01
    modified2020-06-02
    plugin id50863
    published2010-12-02
    reporterThis script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/50863
    titleCentOS 4 / 5 : krb5 (CESA-2010:0926)
  • NASL familySuSE Local Security Checks
    NASL idSUSE_KRB5-7243.NASL
    descriptionMultiple remote vulnerabilities in the MIT krb5 package have been fixed. They affect client as well as server software.
    last seen2020-06-01
    modified2020-06-02
    plugin id51159
    published2010-12-14
    reporterThis script is Copyright (C) 2010-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/51159
    titleSuSE 10 Security Update : krb5 (ZYPP Patch Number 7243)
  • NASL familyGentoo Local Security Checks
    NASL idGENTOO_GLSA-201201-13.NASL
    descriptionThe remote host is affected by the vulnerability described in GLSA-201201-13 (MIT Kerberos 5: Multiple vulnerabilities) Multiple vulnerabilities have been discovered in MIT Kerberos 5. Please review the CVE identifiers referenced below for details. Impact : A remote attacker may be able to execute arbitrary code with the privileges of the administration daemon or the Key Distribution Center (KDC) daemon, cause a Denial of Service condition, or possibly obtain sensitive information. Furthermore, a remote attacker may be able to spoof Kerberos authorization, modify KDC responses, forge user data messages, forge tokens, forge signatures, impersonate a client, modify user-visible prompt text, or have other unspecified impact. Workaround : There is no known workaround at this time.
    last seen2020-06-01
    modified2020-06-02
    plugin id57655
    published2012-01-24
    reporterThis script is Copyright (C) 2012-2018 Tenable Network Security, Inc.
    sourcehttps://www.tenable.com/plugins/nessus/57655
    titleGLSA-201201-13 : MIT Kerberos 5: Multiple vulnerabilities

References