Vulnerabilities > CVE-2018-17985 - Resource Exhaustion vulnerability in GNU Binutils 2.31

047910
CVSS 4.3 - MEDIUM
Attack vector
NETWORK
Attack complexity
MEDIUM
Privileges required
NONE
Confidentiality impact
NONE
Integrity impact
NONE
Availability impact
PARTIAL
network
gnu
CWE-400
nessus
NVD
Published: 2018-10-04
Updated: 2019-10-31

Summary

An issue was discovered in cp-demangle.c in GNU libiberty, as distributed in GNU Binutils 2.31. There is a stack consumption problem caused by the cplus_demangle_type function making recursive calls to itself in certain scenarios involving many 'P' characters.

Vulnerable Configurations

Part Description Count
Application
Gnu
1

Common Weakness Enumeration (CWE)

Common Attack Pattern Enumeration and Classification (CAPEC)

  • XML Ping of the Death
    An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.
  • XML Entity Expansion
    An attacker submits an XML document to a target application where the XML document uses nested entity expansion to produce an excessively large output XML. XML allows the definition of macro-like structures that can be used to simplify the creation of complex structures. However, this capability can be abused to create excessive demands on a processor's CPU and memory. A small number of nested expansions can result in an exponential growth in demands on memory.
  • Inducing Account Lockout
    An attacker leverages the security functionality of the system aimed at thwarting potential attacks to launch a denial of service attack against a legitimate system user. Many systems, for instance, implement a password throttling mechanism that locks an account after a certain number of incorrect log in attempts. An attacker can leverage this throttling mechanism to lock a legitimate user out of their own account. The weakness that is being leveraged by an attacker is the very security feature that has been put in place to counteract attacks.
  • Violating Implicit Assumptions Regarding XML Content (aka XML Denial of Service (XDoS))
    XML Denial of Service (XDoS) can be applied to any technology that utilizes XML data. This is, of course, most distributed systems technology including Java, .Net, databases, and so on. XDoS is most closely associated with web services, SOAP, and Rest, because remote service requesters can post malicious XML payloads to the service provider designed to exhaust the service provider's memory, CPU, and/or disk space. The main weakness in XDoS is that the service provider generally must inspect, parse, and validate the XML messages to determine routing, workflow, security considerations, and so on. It is exactly these inspection, parsing, and validation routines that XDoS targets. There are three primary attack vectors that XDoS can navigate Target CPU through recursion: attacker creates a recursive payload and sends to service provider Target memory through jumbo payloads: service provider uses DOM to parse XML. DOM creates in memory representation of XML document, but when document is very large (for example, north of 1 Gb) service provider host may exhaust memory trying to build memory objects. XML Ping of death: attack service provider with numerous small files that clog the system. All of the above attacks exploit the loosely coupled nature of web services, where the service provider has little to no control over the service requester and any messages the service requester sends.

Nessus

  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2019-2432.NASL
    descriptionThis update for binutils fixes the following issues : binutils was updated to current 2.32 branch [jsc#ECO-368]. Includes following security fixes : - CVE-2018-17358: Fixed invalid memory access in _bfd_stab_section_find_nearest_line in syms.c (bsc#1109412) - CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in opncls.c (bsc#1109413) - CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in libbfd.c (bsc#1109414) - CVE-2018-17985: Fixed a stack consumption problem caused by the cplus_demangle_type (bsc#1116827) - CVE-2018-18309: Fixed an invalid memory address dereference was discovered in read_reloc in reloc.c (bsc#1111996) - CVE-2018-18483: Fixed get_count function provided by libiberty that allowed attackers to cause a denial of service or other unspecified impact (bsc#1112535) - CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions provided by libiberty, caused by recursive stack frames (bsc#1112534) - CVE-2018-18605: Fixed a heap-based buffer over-read issue was discovered in the function sec_merge_hash_lookup causing a denial of service (bsc#1113255) - CVE-2018-18606: Fixed a NULL pointer dereference in _bfd_add_merge_section when attempting to merge sections with large alignments, causing denial of service (bsc#1113252) - CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd when used for finding STT_TLS symbols without any TLS section, causing denial of service (bsc#1113247) - CVE-2018-19931: Fixed a heap-based buffer overflow in bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831) - CVE-2018-19932: Fixed an integer overflow and infinite loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830) - CVE-2018-20623: Fixed a use-after-free in the error function in elfcomm.c (bsc#1121035) - CVE-2018-20651: Fixed a denial of service via a NULL pointer dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034) - CVE-2018-20671: Fixed an integer overflow that can trigger a heap-based buffer overflow in load_specific_debug_section in objdump.c (bsc#1121056) - CVE-2018-1000876: Fixed integer overflow in bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynam ic_reloc in objdump (bsc#1120640) - CVE-2019-1010180: Fixed an out of bound memory access that could lead to crashes (bsc#1142772) - enable xtensa architecture (Tensilica lc6 and related) - Use -ffat-lto-objects in order to provide assembly for static libs (bsc#1141913). - Fixed some LTO build issues (bsc#1133131 bsc#1133232). - riscv: Don
    last seen2020-06-01
    modified2020-06-02
    plugin id130576
    published2019-11-06
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/130576
    titleopenSUSE Security Update : binutils (openSUSE-2019-2432)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from openSUSE Security Update openSUSE-2019-2432.
#
# The text description of this plugin is (C) SUSE LLC.
#

include("compat.inc");

if (description)
{
  script_id(130576);
  script_version("1.2");
  script_cvs_date("Date: 2019/12/17");

  script_cve_id("CVE-2018-1000876", "CVE-2018-17358", "CVE-2018-17359", "CVE-2018-17360", "CVE-2018-17985", "CVE-2018-18309", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18605", "CVE-2018-18606", "CVE-2018-18607", "CVE-2018-19931", "CVE-2018-19932", "CVE-2018-20623", "CVE-2018-20651", "CVE-2018-20671", "CVE-2018-6323", "CVE-2018-6543", "CVE-2018-6759", "CVE-2018-6872", "CVE-2018-7208", "CVE-2018-7568", "CVE-2018-7569", "CVE-2018-7570", "CVE-2018-7642", "CVE-2018-7643", "CVE-2018-8945", "CVE-2019-1010180");

  script_name(english:"openSUSE Security Update : binutils (openSUSE-2019-2432)");
  script_summary(english:"Check for the openSUSE-2019-2432 patch");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote openSUSE host is missing a security update."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"This update for binutils fixes the following issues :

binutils was updated to current 2.32 branch [jsc#ECO-368].

Includes following security fixes :

  - CVE-2018-17358: Fixed invalid memory access in
    _bfd_stab_section_find_nearest_line in syms.c
    (bsc#1109412)

  - CVE-2018-17359: Fixed invalid memory access exists in
    bfd_zalloc in opncls.c (bsc#1109413)

  - CVE-2018-17360: Fixed heap-based buffer over-read in
    bfd_getl32 in libbfd.c (bsc#1109414)

  - CVE-2018-17985: Fixed a stack consumption problem caused
    by the cplus_demangle_type (bsc#1116827)

  - CVE-2018-18309: Fixed an invalid memory address
    dereference was discovered in read_reloc in reloc.c
    (bsc#1111996)

  - CVE-2018-18483: Fixed get_count function provided by
    libiberty that allowed attackers to cause a denial of
    service or other unspecified impact (bsc#1112535)

  - CVE-2018-18484: Fixed stack exhaustion in the C++
    demangling functions provided by libiberty, caused by
    recursive stack frames (bsc#1112534)

  - CVE-2018-18605: Fixed a heap-based buffer over-read
    issue was discovered in the function
    sec_merge_hash_lookup causing a denial of service
    (bsc#1113255)

  - CVE-2018-18606: Fixed a NULL pointer dereference in
    _bfd_add_merge_section when attempting to merge sections
    with large alignments, causing denial of service
    (bsc#1113252)

  - CVE-2018-18607: Fixed a NULL pointer dereference in
    elf_link_input_bfd when used for finding STT_TLS symbols
    without any TLS section, causing denial of service
    (bsc#1113247)

  - CVE-2018-19931: Fixed a heap-based buffer overflow in
    bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831)

  - CVE-2018-19932: Fixed an integer overflow and infinite
    loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830)

  - CVE-2018-20623: Fixed a use-after-free in the error
    function in elfcomm.c (bsc#1121035)

  - CVE-2018-20651: Fixed a denial of service via a NULL
    pointer dereference in elf_link_add_object_symbols in
    elflink.c (bsc#1121034)

  - CVE-2018-20671: Fixed an integer overflow that can
    trigger a heap-based buffer overflow in
    load_specific_debug_section in objdump.c (bsc#1121056)

  - CVE-2018-1000876: Fixed integer overflow in
    bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynam
    ic_reloc in objdump (bsc#1120640)

  - CVE-2019-1010180: Fixed an out of bound memory access
    that could lead to crashes (bsc#1142772)

  - enable xtensa architecture (Tensilica lc6 and related)

  - Use -ffat-lto-objects in order to provide assembly for
    static libs (bsc#1141913).

  - Fixed some LTO build issues (bsc#1133131 bsc#1133232).

  - riscv: Don't check ABI flags if no code section

  - Fixed a segfault in ld when building some versions of
    pacemaker (bsc#1154025, bsc#1154016).

  - Add avr, epiphany and rx to target_list so that the
    common binutils can handle all objects we can create
    with crosses (bsc#1152590).

Update to binutils 2.32 :

  - The binutils now support for the C-SKY processor series.

  - The x86 assembler now supports a -mvexwig=[0|1] option
    to control encoding of VEX.W-ignored (WIG) VEX
    instructions. It also has a new -mx86-used-note=[yes|no]
    option to generate (or not) x86 GNU property notes. 

  - The MIPS assembler now supports the Loongson EXTensions
    R2 (EXT2), the Loongson EXTensions (EXT) instructions,
    the Loongson Content Address Memory (CAM) ASE and the
    Loongson MultiMedia extensions Instructions (MMI) ASE.

  - The addr2line, c++filt, nm and objdump tools now have a
    default limit on the maximum amount of recursion that is
    allowed whilst demangling strings. This limit can be
    disabled if necessary.

  - Objdump's --disassemble option can now take a parameter,
    specifying the starting symbol for disassembly.
    Disassembly will continue from this symbol up to the
    next symbol or the end of the function.

  - The BFD linker will now report property change in linker
    map file when merging GNU properties.

  - The BFD linker's -t option now doesn't report members
    within archives, unless -t is given twice. This makes it
    more useful when generating a list of files that should
    be packaged for a linker bug report.

  - The GOLD linker has improved warning messages for
    relocations that refer to discarded sections.

  - Improve relro support on s390 [fate#326356]

  - Fix broken debug symbols (bsc#1118644)

  - Handle ELF compressed header alignment correctly.

This update was imported from the SUSE:SLE-15-SP1:Update update
project."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1109412"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1109413"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1109414"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111996"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112534"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112535"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113247"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113252"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113255"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1116827"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1118644"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1118830"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1118831"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1120640"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121034"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121035"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121056"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1133131"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1133232"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1141913"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1142772"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1152590"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1154016"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1154025"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://features.opensuse.org/326356"
  );
  script_set_attribute(
    attribute:"solution", 
    value:"Update the affected binutils packages."
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-1010180");
  script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"true");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-devel-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-gold");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-gold-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-aarch64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-aarch64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-aarch64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-arm-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-arm-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-arm-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-avr-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-avr-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-avr-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-epiphany-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-epiphany-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-epiphany-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-i386-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-i386-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-i386-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ia64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ia64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ia64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-m68k-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-m68k-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-m68k-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-mips-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-mips-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-mips-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64le-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64le-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64le-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-riscv64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-riscv64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-riscv64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-rx-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-rx-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-rx-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390x-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390x-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390x-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-spu-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-spu-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-spu-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.1");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/01/26");
  script_set_attribute(attribute:"patch_publication_date", value:"2019/11/05");
  script_set_attribute(attribute:"plugin_publication_date", value:"2019/11/06");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");

if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
if (release !~ "^(SUSE15\.1)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.1", release);
if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

ourarch = get_kb_item("Host/cpu");
if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch);

flag = 0;

if ( rpm_check(release:"SUSE15.1", reference:"binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", reference:"binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", reference:"binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", reference:"binutils-devel-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", reference:"binutils-gold-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", reference:"binutils-gold-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"binutils-devel-32bit-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-aarch64-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-aarch64-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-aarch64-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-arm-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-arm-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-arm-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-avr-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-avr-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-avr-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-epiphany-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-epiphany-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-epiphany-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-hppa-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-hppa-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-hppa-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-hppa64-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-hppa64-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-hppa64-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-i386-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-i386-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-i386-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ia64-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ia64-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ia64-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-m68k-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-m68k-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-m68k-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-mips-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-mips-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-mips-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc64-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc64-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc64-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc64le-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc64le-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-ppc64le-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-riscv64-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-riscv64-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-riscv64-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-rx-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-rx-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-rx-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-s390-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-s390-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-s390-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-s390x-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-s390x-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-s390x-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-sparc-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-sparc-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-sparc-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-sparc64-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-sparc64-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-sparc64-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-spu-binutils-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-spu-binutils-debuginfo-2.32-lp151.3.3.1") ) flag++;
if ( rpm_check(release:"SUSE15.1", cpu:"x86_64", reference:"cross-spu-binutils-debugsource-2.32-lp151.3.3.1") ) flag++;

if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils / binutils-debuginfo / binutils-debugsource / etc");
}
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2019-2650-1.NASL
    descriptionThis update for binutils fixes the following issues : binutils was updated to current 2.32 branch @7b468db3 [jsc#ECO-368] : Includes the following security fixes : CVE-2018-17358: Fixed invalid memory access in _bfd_stab_section_find_nearest_line in syms.c (bsc#1109412) CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in opncls.c (bsc#1109413) CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in libbfd.c (bsc#1109414) CVE-2018-17985: Fixed a stack consumption problem caused by the cplus_demangle_type (bsc#1116827) CVE-2018-18309: Fixed an invalid memory address dereference was discovered in read_reloc in reloc.c (bsc#1111996) CVE-2018-18483: Fixed get_count function provided by libiberty that allowed attackers to cause a denial of service or other unspecified impact (bsc#1112535) CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions provided by libiberty, caused by recursive stack frames (bsc#1112534) CVE-2018-18605: Fixed a heap-based buffer over-read issue was discovered in the function sec_merge_hash_lookup causing a denial of service (bsc#1113255) CVE-2018-18606: Fixed a NULL pointer dereference in _bfd_add_merge_section when attempting to merge sections with large alignments, causing denial of service (bsc#1113252) CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd when used for finding STT_TLS symbols without any TLS section, causing denial of service (bsc#1113247) CVE-2018-19931: Fixed a heap-based buffer overflow in bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831) CVE-2018-19932: Fixed an integer overflow and infinite loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830) CVE-2018-20623: Fixed a use-after-free in the error function in elfcomm.c (bsc#1121035) CVE-2018-20651: Fixed a denial of service via a NULL pointer dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034) CVE-2018-20671: Fixed an integer overflow that can trigger a heap-based buffer overflow in load_specific_debug_section in objdump.c (bsc#1121056) CVE-2018-1000876: Fixed integer overflow in bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynamic_reloc in objdump (bsc#1120640) CVE-2019-1010180: Fixed an out of bound memory access that could lead to crashes (bsc#1142772) Enable xtensa architecture (Tensilica lc6 and related) Use -ffat-lto-objects in order to provide assembly for static libs (bsc#1141913). Fixed some LTO problems (bsc#1133131 bsc#1133232). riscv: Don
    last seen2020-06-01
    modified2020-06-02
    plugin id129879
    published2019-10-15
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/129879
    titleSUSE SLED12 / SLES12 Security Update : binutils (SUSE-SU-2019:2650-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from SUSE update advisory SUSE-SU-2019:2650-1.
# The text itself is copyright (C) SUSE.
#

include("compat.inc");

if (description)
{
  script_id(129879);
  script_version("1.2");
  script_cvs_date("Date: 2019/12/19");

  script_cve_id("CVE-2018-1000876", "CVE-2018-17358", "CVE-2018-17359", "CVE-2018-17360", "CVE-2018-17985", "CVE-2018-18309", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18605", "CVE-2018-18606", "CVE-2018-18607", "CVE-2018-19931", "CVE-2018-19932", "CVE-2018-20623", "CVE-2018-20651", "CVE-2018-20671", "CVE-2019-1010180");

  script_name(english:"SUSE SLED12 / SLES12 Security Update : binutils (SUSE-SU-2019:2650-1)");
  script_summary(english:"Checks rpm output for the updated packages.");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote SUSE host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"This update for binutils fixes the following issues :

binutils was updated to current 2.32 branch @7b468db3 [jsc#ECO-368] :

Includes the following security fixes :

CVE-2018-17358: Fixed invalid memory access in
_bfd_stab_section_find_nearest_line in syms.c (bsc#1109412)

CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in
opncls.c (bsc#1109413)

CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in
libbfd.c (bsc#1109414)

CVE-2018-17985: Fixed a stack consumption problem caused by the
cplus_demangle_type (bsc#1116827)

CVE-2018-18309: Fixed an invalid memory address dereference was
discovered in read_reloc in reloc.c (bsc#1111996)

CVE-2018-18483: Fixed get_count function provided by libiberty that
allowed attackers to cause a denial of service or other unspecified
impact (bsc#1112535)

CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions
provided by libiberty, caused by recursive stack frames (bsc#1112534)

CVE-2018-18605: Fixed a heap-based buffer over-read issue was
discovered in the function sec_merge_hash_lookup causing a denial of
service (bsc#1113255)

CVE-2018-18606: Fixed a NULL pointer dereference in
_bfd_add_merge_section when attempting to merge sections with large
alignments, causing denial of service (bsc#1113252)

CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd
when used for finding STT_TLS symbols without any TLS section, causing
denial of service (bsc#1113247)

CVE-2018-19931: Fixed a heap-based buffer overflow in
bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831)

CVE-2018-19932: Fixed an integer overflow and infinite loop caused by
the IS_CONTAINED_BY_LMA (bsc#1118830)

CVE-2018-20623: Fixed a use-after-free in the error function in
elfcomm.c (bsc#1121035)

CVE-2018-20651: Fixed a denial of service via a NULL pointer
dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034)

CVE-2018-20671: Fixed an integer overflow that can trigger a
heap-based buffer overflow in load_specific_debug_section in objdump.c
(bsc#1121056)

CVE-2018-1000876: Fixed integer overflow in
bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynamic_reloc in
objdump (bsc#1120640)

CVE-2019-1010180: Fixed an out of bound memory access that could lead
to crashes (bsc#1142772)

Enable xtensa architecture (Tensilica lc6 and related)

Use -ffat-lto-objects in order to provide assembly for static libs
(bsc#1141913).

Fixed some LTO problems (bsc#1133131 bsc#1133232).

riscv: Don't check ABI flags if no code section

Update to binutils 2.32: The binutils now support for the C-SKY
processor series.

The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions. It also has a new

-mx86-used-note=[yes|no] option to generate (or not) x86 GNU property
notes.

The MIPS assembler now supports the Loongson EXTensions R2 (EXT2), the
Loongson EXTensions (EXT) instructions, the Loongson Content Address
Memory (CAM) ASE and the Loongson MultiMedia extensions Instructions
(MMI) ASE.

The addr2line, c++filt, nm and objdump tools now have a default limit
on the maximum amount of recursion that is allowed whilst demangling
strings. This limit can be disabled if necessary.

Objdump's --disassemble option can now take a parameter, specifying
the starting symbol for disassembly. Disassembly will continue from
this symbol up to the next symbol or the end of the function.

The BFD linker will now report property change in linker map file when
merging GNU properties.

The BFD linker's -t option now doesn't report members within archives,
unless -t is given twice. This makes it more useful when generating a
list of files that should be packaged for a linker bug report.

The GOLD linker has improved warning messages for relocations that
refer to discarded sections.

Improve relro support on s390 [fate#326356]

Handle ELF compressed header alignment correctly.

Note that Tenable Network Security has extracted the preceding
description block directly from the SUSE security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109412"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109413"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109414"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1111996"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1112534"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1112535"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113247"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113252"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113255"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1116827"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118830"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118831"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1120640"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121034"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121035"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121056"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1133131"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1133232"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1141913"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1142772"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-1000876/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17358/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17359/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17360/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17985/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18309/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18483/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18484/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18605/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18606/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18607/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-19931/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-19932/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20623/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20651/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20671/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2019-1010180/"
  );
  # https://www.suse.com/support/update/announcement/2019/suse-su-20192650-1/
  script_set_attribute(
    attribute:"see_also",
    value:"http://www.nessus.org/u?fc1443fc"
  );
  script_set_attribute(
    attribute:"solution", 
    value:
"To install this SUSE Security Update use the SUSE recommended
installation methods like YaST online_update or 'zypper patch'.

Alternatively you can run the command listed for your product :

SUSE OpenStack Cloud Crowbar 8:zypper in -t patch
SUSE-OpenStack-Cloud-Crowbar-8-2019-2650=1

SUSE OpenStack Cloud 8:zypper in -t patch
SUSE-OpenStack-Cloud-8-2019-2650=1

SUSE OpenStack Cloud 7:zypper in -t patch
SUSE-OpenStack-Cloud-7-2019-2650=1

SUSE Linux Enterprise Software Development Kit 12-SP5:zypper in -t
patch SUSE-SLE-SDK-12-SP5-2019-2650=1

SUSE Linux Enterprise Software Development Kit 12-SP4:zypper in -t
patch SUSE-SLE-SDK-12-SP4-2019-2650=1

SUSE Linux Enterprise Server for SAP 12-SP3:zypper in -t patch
SUSE-SLE-SAP-12-SP3-2019-2650=1

SUSE Linux Enterprise Server for SAP 12-SP2:zypper in -t patch
SUSE-SLE-SAP-12-SP2-2019-2650=1

SUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch
SUSE-SLE-SAP-12-SP1-2019-2650=1

SUSE Linux Enterprise Server 12-SP5:zypper in -t patch
SUSE-SLE-SERVER-12-SP5-2019-2650=1

SUSE Linux Enterprise Server 12-SP4:zypper in -t patch
SUSE-SLE-SERVER-12-SP4-2019-2650=1

SUSE Linux Enterprise Server 12-SP3-LTSS:zypper in -t patch
SUSE-SLE-SERVER-12-SP3-2019-2650=1

SUSE Linux Enterprise Server 12-SP3-BCL:zypper in -t patch
SUSE-SLE-SERVER-12-SP3-BCL-2019-2650=1

SUSE Linux Enterprise Server 12-SP2-LTSS:zypper in -t patch
SUSE-SLE-SERVER-12-SP2-2019-2650=1

SUSE Linux Enterprise Server 12-SP2-BCL:zypper in -t patch
SUSE-SLE-SERVER-12-SP2-BCL-2019-2650=1

SUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch
SUSE-SLE-SERVER-12-SP1-2019-2650=1

SUSE Linux Enterprise Desktop 12-SP5:zypper in -t patch
SUSE-SLE-DESKTOP-12-SP5-2019-2650=1

SUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch
SUSE-SLE-DESKTOP-12-SP4-2019-2650=1

SUSE Enterprise Storage 5:zypper in -t patch
SUSE-Storage-5-2019-2650=1

SUSE Enterprise Storage 4:zypper in -t patch
SUSE-Storage-4-2019-2650=1

HPE Helion Openstack 8:zypper in -t patch
HPE-Helion-OpenStack-8-2019-2650=1"
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-1010180");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-devel");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/09/23");
  script_set_attribute(attribute:"patch_publication_date", value:"2019/10/14");
  script_set_attribute(attribute:"plugin_publication_date", value:"2019/10/15");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
os_ver = os_ver[1];
if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver);

if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);

sp = get_kb_item("Host/SuSE/patchlevel");
if (isnull(sp)) sp = "0";
if (os_ver == "SLES12" && (! preg(pattern:"^(1|2|3|4|5)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP1/2/3/4/5", os_ver + " SP" + sp);
if (os_ver == "SLED12" && (! preg(pattern:"^(4|5)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP4/5", os_ver + " SP" + sp);


flag = 0;
if (rpm_check(release:"SLES12", sp:"1", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"1", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"1", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"1", reference:"binutils-devel-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"4", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"4", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"4", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"3", cpu:"x86_64", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"3", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"3", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"3", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-devel-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"5", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"5", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLES12", sp:"5", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"binutils-debugsource-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLED12", sp:"5", cpu:"x86_64", reference:"binutils-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLED12", sp:"5", cpu:"x86_64", reference:"binutils-debuginfo-2.32-9.33.1")) flag++;
if (rpm_check(release:"SLED12", sp:"5", cpu:"x86_64", reference:"binutils-debugsource-2.32-9.33.1")) flag++;


if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils");
}
  • NASL familyUbuntu Local Security Checks
    NASL idUBUNTU_USN-4326-1.NASL
    descriptionIt was discovered that libiberty incorrectly handled parsing certain binaries. If a user or automated system were tricked into processing a specially crafted binary, a remote attacker could use this issue to cause libiberty to crash, resulting in a denial of service, or possibly execute arbitrary code. Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-04-16
    modified2020-04-10
    plugin id135398
    published2020-04-10
    reporterUbuntu Security Notice (C) 2020 Canonical, Inc. / NASL script (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/135398
    titleUbuntu 16.04 LTS / 18.04 LTS : libiberty vulnerabilities (USN-4326-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from Ubuntu Security Notice USN-4326-1. The text 
# itself is copyright (C) Canonical, Inc. See 
# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered 
# trademark of Canonical, Inc.
#

include("compat.inc");

if (description)
{
  script_id(135398);
  script_version("1.2");
  script_set_attribute(attribute:"plugin_modification_date", value:"2020/04/14");

  script_cve_id("CVE-2018-12641", "CVE-2018-12697", "CVE-2018-12698", "CVE-2018-12934", "CVE-2018-17794", "CVE-2018-17985", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18700", "CVE-2018-18701", "CVE-2018-9138", "CVE-2019-14250", "CVE-2019-9070", "CVE-2019-9071");
  script_xref(name:"USN", value:"4326-1");

  script_name(english:"Ubuntu 16.04 LTS / 18.04 LTS : libiberty vulnerabilities (USN-4326-1)");
  script_summary(english:"Checks dpkg output for updated package.");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote Ubuntu host is missing a security-related patch."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"It was discovered that libiberty incorrectly handled parsing certain
binaries. If a user or automated system were tricked into processing a
specially crafted binary, a remote attacker could use this issue to
cause libiberty to crash, resulting in a denial of service, or
possibly execute arbitrary code.

Note that Tenable Network Security has extracted the preceding
description block directly from the Ubuntu security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://usn.ubuntu.com/4326-1/"
  );
  script_set_attribute(
    attribute:"solution", 
    value:"Update the affected libiberty-dev package."
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:libiberty-dev");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:16.04");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:18.04:-:lts");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/03/30");
  script_set_attribute(attribute:"patch_publication_date", value:"2020/04/08");
  script_set_attribute(attribute:"plugin_publication_date", value:"2020/04/10");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"Ubuntu Security Notice (C) 2020 Canonical, Inc. / NASL script (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Ubuntu Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/cpu", "Host/Ubuntu", "Host/Ubuntu/release", "Host/Debian/dpkg-l");

  exit(0);
}


include("audit.inc");
include("ubuntu.inc");
include("misc_func.inc");

if ( ! get_kb_item("Host/local_checks_enabled") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/Ubuntu/release");
if ( isnull(release) ) audit(AUDIT_OS_NOT, "Ubuntu");
release = chomp(release);
if (! preg(pattern:"^(16\.04|18\.04)$", string:release)) audit(AUDIT_OS_NOT, "Ubuntu 16.04 / 18.04", "Ubuntu " + release);
if ( ! get_kb_item("Host/Debian/dpkg-l") ) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Ubuntu", cpu);

flag = 0;

if (ubuntu_check(osver:"16.04", pkgname:"libiberty-dev", pkgver:"20160215-1ubuntu0.3")) flag++;
if (ubuntu_check(osver:"18.04", pkgname:"libiberty-dev", pkgver:"20170913-1ubuntu0.1")) flag++;

if (flag)
{
  security_report_v4(
    port       : 0,
    severity   : SECURITY_WARNING,
    extra      : ubuntu_report_get()
  );
  exit(0);
}
else
{
  tested = ubuntu_pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "libiberty-dev");
}
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2019-2415.NASL
    descriptionThis update for binutils fixes the following issues : binutils was updated to current 2.32 branch [jsc#ECO-368]. Includes following security fixes : - CVE-2018-17358: Fixed invalid memory access in _bfd_stab_section_find_nearest_line in syms.c (bsc#1109412) - CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in opncls.c (bsc#1109413) - CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in libbfd.c (bsc#1109414) - CVE-2018-17985: Fixed a stack consumption problem caused by the cplus_demangle_type (bsc#1116827) - CVE-2018-18309: Fixed an invalid memory address dereference was discovered in read_reloc in reloc.c (bsc#1111996) - CVE-2018-18483: Fixed get_count function provided by libiberty that allowed attackers to cause a denial of service or other unspecified impact (bsc#1112535) - CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions provided by libiberty, caused by recursive stack frames (bsc#1112534) - CVE-2018-18605: Fixed a heap-based buffer over-read issue was discovered in the function sec_merge_hash_lookup causing a denial of service (bsc#1113255) - CVE-2018-18606: Fixed a NULL pointer dereference in _bfd_add_merge_section when attempting to merge sections with large alignments, causing denial of service (bsc#1113252) - CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd when used for finding STT_TLS symbols without any TLS section, causing denial of service (bsc#1113247) - CVE-2018-19931: Fixed a heap-based buffer overflow in bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831) - CVE-2018-19932: Fixed an integer overflow and infinite loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830) - CVE-2018-20623: Fixed a use-after-free in the error function in elfcomm.c (bsc#1121035) - CVE-2018-20651: Fixed a denial of service via a NULL pointer dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034) - CVE-2018-20671: Fixed an integer overflow that can trigger a heap-based buffer overflow in load_specific_debug_section in objdump.c (bsc#1121056) - CVE-2018-1000876: Fixed integer overflow in bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynam ic_reloc in objdump (bsc#1120640) - CVE-2019-1010180: Fixed an out of bound memory access that could lead to crashes (bsc#1142772) - enable xtensa architecture (Tensilica lc6 and related) - Use -ffat-lto-objects in order to provide assembly for static libs (bsc#1141913). - Fixed some LTO build issues (bsc#1133131 bsc#1133232). - riscv: Don
    last seen2020-06-01
    modified2020-06-02
    plugin id130420
    published2019-10-31
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/130420
    titleopenSUSE Security Update : binutils (openSUSE-2019-2415)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from openSUSE Security Update openSUSE-2019-2415.
#
# The text description of this plugin is (C) SUSE LLC.
#

include("compat.inc");

if (description)
{
  script_id(130420);
  script_version("1.2");
  script_cvs_date("Date: 2019/12/17");

  script_cve_id("CVE-2018-1000876", "CVE-2018-17358", "CVE-2018-17359", "CVE-2018-17360", "CVE-2018-17985", "CVE-2018-18309", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18605", "CVE-2018-18606", "CVE-2018-18607", "CVE-2018-19931", "CVE-2018-19932", "CVE-2018-20623", "CVE-2018-20651", "CVE-2018-20671", "CVE-2018-6323", "CVE-2018-6543", "CVE-2018-6759", "CVE-2018-6872", "CVE-2018-7208", "CVE-2018-7568", "CVE-2018-7569", "CVE-2018-7570", "CVE-2018-7642", "CVE-2018-7643", "CVE-2018-8945", "CVE-2019-1010180");

  script_name(english:"openSUSE Security Update : binutils (openSUSE-2019-2415)");
  script_summary(english:"Check for the openSUSE-2019-2415 patch");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote openSUSE host is missing a security update."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"This update for binutils fixes the following issues :

binutils was updated to current 2.32 branch [jsc#ECO-368].

Includes following security fixes :

  - CVE-2018-17358: Fixed invalid memory access in
    _bfd_stab_section_find_nearest_line in syms.c
    (bsc#1109412)

  - CVE-2018-17359: Fixed invalid memory access exists in
    bfd_zalloc in opncls.c (bsc#1109413)

  - CVE-2018-17360: Fixed heap-based buffer over-read in
    bfd_getl32 in libbfd.c (bsc#1109414)

  - CVE-2018-17985: Fixed a stack consumption problem caused
    by the cplus_demangle_type (bsc#1116827)

  - CVE-2018-18309: Fixed an invalid memory address
    dereference was discovered in read_reloc in reloc.c
    (bsc#1111996)

  - CVE-2018-18483: Fixed get_count function provided by
    libiberty that allowed attackers to cause a denial of
    service or other unspecified impact (bsc#1112535)

  - CVE-2018-18484: Fixed stack exhaustion in the C++
    demangling functions provided by libiberty, caused by
    recursive stack frames (bsc#1112534)

  - CVE-2018-18605: Fixed a heap-based buffer over-read
    issue was discovered in the function
    sec_merge_hash_lookup causing a denial of service
    (bsc#1113255)

  - CVE-2018-18606: Fixed a NULL pointer dereference in
    _bfd_add_merge_section when attempting to merge sections
    with large alignments, causing denial of service
    (bsc#1113252)

  - CVE-2018-18607: Fixed a NULL pointer dereference in
    elf_link_input_bfd when used for finding STT_TLS symbols
    without any TLS section, causing denial of service
    (bsc#1113247)

  - CVE-2018-19931: Fixed a heap-based buffer overflow in
    bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831)

  - CVE-2018-19932: Fixed an integer overflow and infinite
    loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830)

  - CVE-2018-20623: Fixed a use-after-free in the error
    function in elfcomm.c (bsc#1121035)

  - CVE-2018-20651: Fixed a denial of service via a NULL
    pointer dereference in elf_link_add_object_symbols in
    elflink.c (bsc#1121034)

  - CVE-2018-20671: Fixed an integer overflow that can
    trigger a heap-based buffer overflow in
    load_specific_debug_section in objdump.c (bsc#1121056)

  - CVE-2018-1000876: Fixed integer overflow in
    bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynam
    ic_reloc in objdump (bsc#1120640)

  - CVE-2019-1010180: Fixed an out of bound memory access
    that could lead to crashes (bsc#1142772)

  - enable xtensa architecture (Tensilica lc6 and related)

  - Use -ffat-lto-objects in order to provide assembly for
    static libs (bsc#1141913).

  - Fixed some LTO build issues (bsc#1133131 bsc#1133232).

  - riscv: Don't check ABI flags if no code section

  - Fixed a segfault in ld when building some versions of
    pacemaker (bsc#1154025, bsc#1154016).

  - Add avr, epiphany and rx to target_list so that the
    common binutils can handle all objects we can create
    with crosses (bsc#1152590).

Update to binutils 2.32 :

  - The binutils now support for the C-SKY processor series.

  - The x86 assembler now supports a -mvexwig=[0|1] option
    to control encoding of VEX.W-ignored (WIG) VEX
    instructions. It also has a new -mx86-used-note=[yes|no]
    option to generate (or not) x86 GNU property notes. 

  - The MIPS assembler now supports the Loongson EXTensions
    R2 (EXT2), the Loongson EXTensions (EXT) instructions,
    the Loongson Content Address Memory (CAM) ASE and the
    Loongson MultiMedia extensions Instructions (MMI) ASE.

  - The addr2line, c++filt, nm and objdump tools now have a
    default limit on the maximum amount of recursion that is
    allowed whilst demangling strings. This limit can be
    disabled if necessary.

  - Objdump's --disassemble option can now take a parameter,
    specifying the starting symbol for disassembly.
    Disassembly will continue from this symbol up to the
    next symbol or the end of the function.

  - The BFD linker will now report property change in linker
    map file when merging GNU properties.

  - The BFD linker's -t option now doesn't report members
    within archives, unless -t is given twice. This makes it
    more useful when generating a list of files that should
    be packaged for a linker bug report.

  - The GOLD linker has improved warning messages for
    relocations that refer to discarded sections.

  - Improve relro support on s390 [fate#326356]

  - Fix broken debug symbols (bsc#1118644)

  - Handle ELF compressed header alignment correctly.

This update was imported from the SUSE:SLE-15:Update update project."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1109412"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1109413"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1109414"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111996"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112534"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112535"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113247"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113252"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1113255"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1116827"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1118644"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1118830"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1118831"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1120640"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121034"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121035"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1121056"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1133131"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1133232"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1141913"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1142772"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1152590"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1154016"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1154025"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://features.opensuse.org/326356"
  );
  script_set_attribute(
    attribute:"solution", 
    value:"Update the affected binutils packages."
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-1010180");
  script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"true");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-devel-32bit");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-gold");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-gold-debuginfo");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.0");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/01/26");
  script_set_attribute(attribute:"patch_publication_date", value:"2019/10/30");
  script_set_attribute(attribute:"plugin_publication_date", value:"2019/10/31");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");

if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
if (release !~ "^(SUSE15\.0)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.0", release);
if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

ourarch = get_kb_item("Host/cpu");
if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch);

flag = 0;

if ( rpm_check(release:"SUSE15.0", reference:"binutils-2.32-lp150.10.1") ) flag++;
if ( rpm_check(release:"SUSE15.0", reference:"binutils-debuginfo-2.32-lp150.10.1") ) flag++;
if ( rpm_check(release:"SUSE15.0", reference:"binutils-debugsource-2.32-lp150.10.1") ) flag++;
if ( rpm_check(release:"SUSE15.0", reference:"binutils-devel-2.32-lp150.10.1") ) flag++;
if ( rpm_check(release:"SUSE15.0", reference:"binutils-gold-2.32-lp150.10.1") ) flag++;
if ( rpm_check(release:"SUSE15.0", reference:"binutils-gold-debuginfo-2.32-lp150.10.1") ) flag++;
if ( rpm_check(release:"SUSE15.0", cpu:"x86_64", reference:"binutils-devel-32bit-2.32-lp150.10.1") ) flag++;

if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils / binutils-debuginfo / binutils-debugsource / etc");
}
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2019-2780-1.NASL
    descriptionThis update for binutils fixes the following issues : binutils was updated to current 2.32 branch [jsc#ECO-368]. Includes following security fixes : CVE-2018-17358: Fixed invalid memory access in _bfd_stab_section_find_nearest_line in syms.c (bsc#1109412) CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in opncls.c (bsc#1109413) CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in libbfd.c (bsc#1109414) CVE-2018-17985: Fixed a stack consumption problem caused by the cplus_demangle_type (bsc#1116827) CVE-2018-18309: Fixed an invalid memory address dereference was discovered in read_reloc in reloc.c (bsc#1111996) CVE-2018-18483: Fixed get_count function provided by libiberty that allowed attackers to cause a denial of service or other unspecified impact (bsc#1112535) CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions provided by libiberty, caused by recursive stack frames (bsc#1112534) CVE-2018-18605: Fixed a heap-based buffer over-read issue was discovered in the function sec_merge_hash_lookup causing a denial of service (bsc#1113255) CVE-2018-18606: Fixed a NULL pointer dereference in _bfd_add_merge_section when attempting to merge sections with large alignments, causing denial of service (bsc#1113252) CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd when used for finding STT_TLS symbols without any TLS section, causing denial of service (bsc#1113247) CVE-2018-19931: Fixed a heap-based buffer overflow in bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831) CVE-2018-19932: Fixed an integer overflow and infinite loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830) CVE-2018-20623: Fixed a use-after-free in the error function in elfcomm.c (bsc#1121035) CVE-2018-20651: Fixed a denial of service via a NULL pointer dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034) CVE-2018-20671: Fixed an integer overflow that can trigger a heap-based buffer overflow in load_specific_debug_section in objdump.c (bsc#1121056) CVE-2018-1000876: Fixed integer overflow in bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynamic_reloc in objdump (bsc#1120640) CVE-2019-1010180: Fixed an out of bound memory access that could lead to crashes (bsc#1142772) enable xtensa architecture (Tensilica lc6 and related) Use -ffat-lto-objects in order to provide assembly for static libs (bsc#1141913). Fixed some LTO build issues (bsc#1133131 bsc#1133232). riscv: Don
    last seen2020-06-01
    modified2020-06-02
    plugin id130340
    published2019-10-28
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/130340
    titleSUSE SLED15 / SLES15 Security Update : binutils (SUSE-SU-2019:2780-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from SUSE update advisory SUSE-SU-2019:2780-1.
# The text itself is copyright (C) SUSE.
#

include("compat.inc");

if (description)
{
  script_id(130340);
  script_version("1.2");
  script_cvs_date("Date: 2019/12/18");

  script_cve_id("CVE-2018-1000876", "CVE-2018-17358", "CVE-2018-17359", "CVE-2018-17360", "CVE-2018-17985", "CVE-2018-18309", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18605", "CVE-2018-18606", "CVE-2018-18607", "CVE-2018-19931", "CVE-2018-19932", "CVE-2018-20623", "CVE-2018-20651", "CVE-2018-20671", "CVE-2018-6323", "CVE-2018-6543", "CVE-2018-6759", "CVE-2018-6872", "CVE-2018-7208", "CVE-2018-7568", "CVE-2018-7569", "CVE-2018-7570", "CVE-2018-7642", "CVE-2018-7643", "CVE-2018-8945", "CVE-2019-1010180");

  script_name(english:"SUSE SLED15 / SLES15 Security Update : binutils (SUSE-SU-2019:2780-1)");
  script_summary(english:"Checks rpm output for the updated packages.");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote SUSE host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"This update for binutils fixes the following issues :

binutils was updated to current 2.32 branch [jsc#ECO-368].

Includes following security fixes :

CVE-2018-17358: Fixed invalid memory access in
_bfd_stab_section_find_nearest_line in syms.c (bsc#1109412)

CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in
opncls.c (bsc#1109413)

CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in
libbfd.c (bsc#1109414)

CVE-2018-17985: Fixed a stack consumption problem caused by the
cplus_demangle_type (bsc#1116827)

CVE-2018-18309: Fixed an invalid memory address dereference was
discovered in read_reloc in reloc.c (bsc#1111996)

CVE-2018-18483: Fixed get_count function provided by libiberty that
allowed attackers to cause a denial of service or other unspecified
impact (bsc#1112535)

CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions
provided by libiberty, caused by recursive stack frames (bsc#1112534)

CVE-2018-18605: Fixed a heap-based buffer over-read issue was
discovered in the function sec_merge_hash_lookup causing a denial of
service (bsc#1113255)

CVE-2018-18606: Fixed a NULL pointer dereference in
_bfd_add_merge_section when attempting to merge sections with large
alignments, causing denial of service (bsc#1113252)

CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd
when used for finding STT_TLS symbols without any TLS section, causing
denial of service (bsc#1113247)

CVE-2018-19931: Fixed a heap-based buffer overflow in
bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831)

CVE-2018-19932: Fixed an integer overflow and infinite loop caused by
the IS_CONTAINED_BY_LMA (bsc#1118830)

CVE-2018-20623: Fixed a use-after-free in the error function in
elfcomm.c (bsc#1121035)

CVE-2018-20651: Fixed a denial of service via a NULL pointer
dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034)

CVE-2018-20671: Fixed an integer overflow that can trigger a
heap-based buffer overflow in load_specific_debug_section in objdump.c
(bsc#1121056)

CVE-2018-1000876: Fixed integer overflow in
bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynamic_reloc in
objdump (bsc#1120640)

CVE-2019-1010180: Fixed an out of bound memory access that could lead
to crashes (bsc#1142772)

enable xtensa architecture (Tensilica lc6 and related)

Use -ffat-lto-objects in order to provide assembly for static libs
(bsc#1141913).

Fixed some LTO build issues (bsc#1133131 bsc#1133232).

riscv: Don't check ABI flags if no code section

Fixed a segfault in ld when building some versions of pacemaker
(bsc#1154025, bsc#1154016).

Add avr, epiphany and rx to target_list so that the common binutils
can handle all objects we can create with crosses (bsc#1152590).

Update to binutils 2.32: The binutils now support for the C-SKY
processor series.

The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions. It also has a new

-mx86-used-note=[yes|no] option to generate (or not) x86 GNU property
notes.

The MIPS assembler now supports the Loongson EXTensions R2 (EXT2), the
Loongson EXTensions (EXT) instructions, the Loongson Content Address
Memory (CAM) ASE and the Loongson MultiMedia extensions Instructions
(MMI) ASE.

The addr2line, c++filt, nm and objdump tools now have a default limit
on the maximum amount of recursion that is allowed whilst demangling
strings. This limit can be disabled if necessary.

Objdump's --disassemble option can now take a parameter, specifying
the starting symbol for disassembly. Disassembly will continue from
this symbol up to the next symbol or the end of the function.

The BFD linker will now report property change in linker map file when
merging GNU properties.

The BFD linker's -t option now doesn't report members within archives,
unless -t is given twice. This makes it more useful when generating a
list of files that should be packaged for a linker bug report.

The GOLD linker has improved warning messages for relocations that
refer to discarded sections.

Improve relro support on s390 [fate#326356]

Fix broken debug symbols (bsc#1118644)

Handle ELF compressed header alignment correctly.

Note that Tenable Network Security has extracted the preceding
description block directly from the SUSE security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109412"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109413"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109414"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1111996"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1112534"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1112535"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113247"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113252"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113255"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1116827"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118644"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118830"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118831"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1120640"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121034"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121035"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121056"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1133131"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1133232"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1141913"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1142772"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1152590"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1154016"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1154025"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-1000876/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17358/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17359/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17360/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17985/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18309/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18483/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18484/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18605/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18606/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18607/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-19931/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-19932/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20623/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20651/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20671/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6323/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6543/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6759/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6872/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7208/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7568/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7569/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7570/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7642/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7643/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-8945/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2019-1010180/"
  );
  # https://www.suse.com/support/update/announcement/2019/suse-su-20192780-1/
  script_set_attribute(
    attribute:"see_also",
    value:"http://www.nessus.org/u?390f7f64"
  );
  script_set_attribute(
    attribute:"solution", 
    value:
"To install this SUSE Security Update use the SUSE recommended
installation methods like YaST online_update or 'zypper patch'.

Alternatively you can run the command listed for your product :

SUSE Linux Enterprise Module for Packagehub Subpackages 15:zypper in
-t patch SUSE-SLE-Module-Packagehub-Subpackages-15-2019-2780=1

SUSE Linux Enterprise Module for Open Buildservice Development Tools
15:zypper in -t patch
SUSE-SLE-Module-Development-Tools-OBS-15-2019-2780=1

SUSE Linux Enterprise Module for Development Tools 15:zypper in -t
patch SUSE-SLE-Module-Development-Tools-15-2019-2780=1

SUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch
SUSE-SLE-Module-Basesystem-15-2019-2780=1"
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-1010180");
  script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"true");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-gold");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-gold-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-arm-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-arm-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-arm-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-avr-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-avr-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-avr-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-epiphany-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-epiphany-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-epiphany-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-i386-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-i386-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-i386-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ia64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ia64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ia64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-m68k-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-m68k-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-m68k-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-mips-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-mips-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-mips-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-riscv64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-riscv64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-riscv64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-rx-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-rx-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-rx-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-spu-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-spu-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-spu-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:15");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/01/26");
  script_set_attribute(attribute:"patch_publication_date", value:"2019/10/25");
  script_set_attribute(attribute:"plugin_publication_date", value:"2019/10/28");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
os_ver = os_ver[1];
if (! preg(pattern:"^(SLED15|SLES15)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED15 / SLES15", "SUSE " + os_ver);

if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);

sp = get_kb_item("Host/SuSE/patchlevel");
if (isnull(sp)) sp = "0";
if (os_ver == "SLES15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLES15 SP0", os_ver + " SP" + sp);
if (os_ver == "SLED15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLED15 SP0", os_ver + " SP" + sp);


flag = 0;
if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"binutils-devel-32bit-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-gold-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-gold-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-gold-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-gold-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-arm-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-arm-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-arm-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-avr-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-avr-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-avr-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-epiphany-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-epiphany-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-epiphany-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-hppa-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-hppa-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-hppa-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-hppa64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-hppa64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-hppa64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-i386-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-i386-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-i386-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ia64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ia64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ia64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-m68k-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-m68k-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-m68k-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-mips-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-mips-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-mips-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ppc-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ppc-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ppc-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ppc64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ppc64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-ppc64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-riscv64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-riscv64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-riscv64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-rx-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-rx-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-rx-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-s390-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-s390-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-s390-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-sparc-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-sparc-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-sparc-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-sparc64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-sparc64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-sparc64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-spu-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-spu-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"cross-spu-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"0", reference:"binutils-devel-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", cpu:"x86_64", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", cpu:"x86_64", reference:"binutils-devel-32bit-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-gold-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-gold-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-gold-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-gold-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-arm-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-arm-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-arm-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-avr-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-avr-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-avr-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-epiphany-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-epiphany-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-epiphany-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-hppa-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-hppa-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-hppa-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-hppa64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-hppa64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-hppa64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-i386-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-i386-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-i386-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ia64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ia64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ia64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-m68k-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-m68k-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-m68k-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-mips-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-mips-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-mips-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ppc-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ppc-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ppc-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ppc64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ppc64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-ppc64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-riscv64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-riscv64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-riscv64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-rx-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-rx-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-rx-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-s390-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-s390-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-s390-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-sparc-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-sparc-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-sparc-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-sparc64-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-sparc64-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-sparc64-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-spu-binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-spu-binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"cross-spu-binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-debuginfo-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-debugsource-2.32-6.8.1")) flag++;
if (rpm_check(release:"SLED15", sp:"0", reference:"binutils-devel-2.32-6.8.1")) flag++;


if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils");
}
  • NASL familyUbuntu Local Security Checks
    NASL idUBUNTU_USN-4336-1.NASL
    descriptionIt was discovered that GNU binutils contained a large number of security issues. If a user or automated system were tricked into processing a specially crafted file, a remote attacker could cause GNU binutils to crash, resulting in a denial of service, or possibly execute arbitrary code. Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-04-30
    modified2020-04-24
    plugin id135966
    published2020-04-24
    reporterUbuntu Security Notice (C) 2020 Canonical, Inc. / NASL script (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/135966
    titleUbuntu 18.04 LTS : binutils vulnerabilities (USN-4336-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from Ubuntu Security Notice USN-4336-1. The text 
# itself is copyright (C) Canonical, Inc. See 
# <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered 
# trademark of Canonical, Inc.
#

include("compat.inc");

if (description)
{
  script_id(135966);
  script_version("1.2");
  script_set_attribute(attribute:"plugin_modification_date", value:"2020/04/28");

  script_cve_id("CVE-2018-1000876", "CVE-2018-10372", "CVE-2018-10373", "CVE-2018-10534", "CVE-2018-10535", "CVE-2018-12641", "CVE-2018-12697", "CVE-2018-12698", "CVE-2018-12699", "CVE-2018-12700", "CVE-2018-12934", "CVE-2018-13033", "CVE-2018-17358", "CVE-2018-17359", "CVE-2018-17360", "CVE-2018-17794", "CVE-2018-17985", "CVE-2018-18309", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18605", "CVE-2018-18606", "CVE-2018-18607", "CVE-2018-18700", "CVE-2018-18701", "CVE-2018-19931", "CVE-2018-19932", "CVE-2018-20002", "CVE-2018-20623", "CVE-2018-20651", "CVE-2018-20671", "CVE-2018-8945", "CVE-2018-9138", "CVE-2019-12972", "CVE-2019-14250", "CVE-2019-14444", "CVE-2019-17450", "CVE-2019-17451", "CVE-2019-9070", "CVE-2019-9071", "CVE-2019-9073", "CVE-2019-9074", "CVE-2019-9075", "CVE-2019-9077");
  script_xref(name:"USN", value:"4336-1");

  script_name(english:"Ubuntu 18.04 LTS : binutils vulnerabilities (USN-4336-1)");
  script_summary(english:"Checks dpkg output for updated packages.");

  script_set_attribute(
    attribute:"synopsis", 
    value:
"The remote Ubuntu host is missing one or more security-related
patches."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"It was discovered that GNU binutils contained a large number of
security issues. If a user or automated system were tricked into
processing a specially crafted file, a remote attacker could cause GNU
binutils to crash, resulting in a denial of service, or possibly
execute arbitrary code.

Note that Tenable Network Security has extracted the preceding
description block directly from the Ubuntu security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://usn.ubuntu.com/4336-1/"
  );
  script_set_attribute(
    attribute:"solution", 
    value:"Update the affected binutils and / or binutils-multiarch packages."
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
  script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:binutils-multiarch");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:18.04:-:lts");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/03/22");
  script_set_attribute(attribute:"patch_publication_date", value:"2020/04/22");
  script_set_attribute(attribute:"plugin_publication_date", value:"2020/04/24");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"Ubuntu Security Notice (C) 2020 Canonical, Inc. / NASL script (C) 2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"Ubuntu Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/cpu", "Host/Ubuntu", "Host/Ubuntu/release", "Host/Debian/dpkg-l");

  exit(0);
}


include("audit.inc");
include("ubuntu.inc");
include("misc_func.inc");

if ( ! get_kb_item("Host/local_checks_enabled") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/Ubuntu/release");
if ( isnull(release) ) audit(AUDIT_OS_NOT, "Ubuntu");
release = chomp(release);
if (! preg(pattern:"^(18\.04)$", string:release)) audit(AUDIT_OS_NOT, "Ubuntu 18.04", "Ubuntu " + release);
if ( ! get_kb_item("Host/Debian/dpkg-l") ) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Ubuntu", cpu);

flag = 0;

if (ubuntu_check(osver:"18.04", pkgname:"binutils", pkgver:"2.30-21ubuntu1~18.04.3")) flag++;
if (ubuntu_check(osver:"18.04", pkgname:"binutils-multiarch", pkgver:"2.30-21ubuntu1~18.04.3")) flag++;

if (flag)
{
  security_report_v4(
    port       : 0,
    severity   : SECURITY_HOLE,
    extra      : ubuntu_report_get()
  );
  exit(0);
}
else
{
  tested = ubuntu_pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils / binutils-multiarch");
}
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2019-2779-1.NASL
    descriptionThis update for binutils fixes the following issues : binutils was updated to current 2.32 branch [jsc#ECO-368]. Includes following security fixes : CVE-2018-17358: Fixed invalid memory access in _bfd_stab_section_find_nearest_line in syms.c (bsc#1109412) CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in opncls.c (bsc#1109413) CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in libbfd.c (bsc#1109414) CVE-2018-17985: Fixed a stack consumption problem caused by the cplus_demangle_type (bsc#1116827) CVE-2018-18309: Fixed an invalid memory address dereference was discovered in read_reloc in reloc.c (bsc#1111996) CVE-2018-18483: Fixed get_count function provided by libiberty that allowed attackers to cause a denial of service or other unspecified impact (bsc#1112535) CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions provided by libiberty, caused by recursive stack frames (bsc#1112534) CVE-2018-18605: Fixed a heap-based buffer over-read issue was discovered in the function sec_merge_hash_lookup causing a denial of service (bsc#1113255) CVE-2018-18606: Fixed a NULL pointer dereference in _bfd_add_merge_section when attempting to merge sections with large alignments, causing denial of service (bsc#1113252) CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd when used for finding STT_TLS symbols without any TLS section, causing denial of service (bsc#1113247) CVE-2018-19931: Fixed a heap-based buffer overflow in bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831) CVE-2018-19932: Fixed an integer overflow and infinite loop caused by the IS_CONTAINED_BY_LMA (bsc#1118830) CVE-2018-20623: Fixed a use-after-free in the error function in elfcomm.c (bsc#1121035) CVE-2018-20651: Fixed a denial of service via a NULL pointer dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034) CVE-2018-20671: Fixed an integer overflow that can trigger a heap-based buffer overflow in load_specific_debug_section in objdump.c (bsc#1121056) CVE-2018-1000876: Fixed integer overflow in bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynamic_reloc in objdump (bsc#1120640) CVE-2019-1010180: Fixed an out of bound memory access that could lead to crashes (bsc#1142772) enable xtensa architecture (Tensilica lc6 and related) Use -ffat-lto-objects in order to provide assembly for static libs (bsc#1141913). Fixed some LTO build issues (bsc#1133131 bsc#1133232). riscv: Don
    last seen2020-06-01
    modified2020-06-02
    plugin id130257
    published2019-10-25
    reporterThis script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/130257
    titleSUSE SLED15 / SLES15 Security Update : binutils (SUSE-SU-2019:2779-1)
    code
    #
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from SUSE update advisory SUSE-SU-2019:2779-1.
# The text itself is copyright (C) SUSE.
#

include("compat.inc");

if (description)
{
  script_id(130257);
  script_version("1.2");
  script_cvs_date("Date: 2019/12/18");

  script_cve_id("CVE-2018-1000876", "CVE-2018-17358", "CVE-2018-17359", "CVE-2018-17360", "CVE-2018-17985", "CVE-2018-18309", "CVE-2018-18483", "CVE-2018-18484", "CVE-2018-18605", "CVE-2018-18606", "CVE-2018-18607", "CVE-2018-19931", "CVE-2018-19932", "CVE-2018-20623", "CVE-2018-20651", "CVE-2018-20671", "CVE-2018-6323", "CVE-2018-6543", "CVE-2018-6759", "CVE-2018-6872", "CVE-2018-7208", "CVE-2018-7568", "CVE-2018-7569", "CVE-2018-7570", "CVE-2018-7642", "CVE-2018-7643", "CVE-2018-8945", "CVE-2019-1010180");

  script_name(english:"SUSE SLED15 / SLES15 Security Update : binutils (SUSE-SU-2019:2779-1)");
  script_summary(english:"Checks rpm output for the updated packages.");

  script_set_attribute(
    attribute:"synopsis", 
    value:"The remote SUSE host is missing one or more security updates."
  );
  script_set_attribute(
    attribute:"description", 
    value:
"This update for binutils fixes the following issues :

binutils was updated to current 2.32 branch [jsc#ECO-368].

Includes following security fixes :

CVE-2018-17358: Fixed invalid memory access in
_bfd_stab_section_find_nearest_line in syms.c (bsc#1109412)

CVE-2018-17359: Fixed invalid memory access exists in bfd_zalloc in
opncls.c (bsc#1109413)

CVE-2018-17360: Fixed heap-based buffer over-read in bfd_getl32 in
libbfd.c (bsc#1109414)

CVE-2018-17985: Fixed a stack consumption problem caused by the
cplus_demangle_type (bsc#1116827)

CVE-2018-18309: Fixed an invalid memory address dereference was
discovered in read_reloc in reloc.c (bsc#1111996)

CVE-2018-18483: Fixed get_count function provided by libiberty that
allowed attackers to cause a denial of service or other unspecified
impact (bsc#1112535)

CVE-2018-18484: Fixed stack exhaustion in the C++ demangling functions
provided by libiberty, caused by recursive stack frames (bsc#1112534)

CVE-2018-18605: Fixed a heap-based buffer over-read issue was
discovered in the function sec_merge_hash_lookup causing a denial of
service (bsc#1113255)

CVE-2018-18606: Fixed a NULL pointer dereference in
_bfd_add_merge_section when attempting to merge sections with large
alignments, causing denial of service (bsc#1113252)

CVE-2018-18607: Fixed a NULL pointer dereference in elf_link_input_bfd
when used for finding STT_TLS symbols without any TLS section, causing
denial of service (bsc#1113247)

CVE-2018-19931: Fixed a heap-based buffer overflow in
bfd_elf32_swap_phdr_in in elfcode.h (bsc#1118831)

CVE-2018-19932: Fixed an integer overflow and infinite loop caused by
the IS_CONTAINED_BY_LMA (bsc#1118830)

CVE-2018-20623: Fixed a use-after-free in the error function in
elfcomm.c (bsc#1121035)

CVE-2018-20651: Fixed a denial of service via a NULL pointer
dereference in elf_link_add_object_symbols in elflink.c (bsc#1121034)

CVE-2018-20671: Fixed an integer overflow that can trigger a
heap-based buffer overflow in load_specific_debug_section in objdump.c
(bsc#1121056)

CVE-2018-1000876: Fixed integer overflow in
bfd_get_dynamic_reloc_upper_bound,bfd_canonicalize_dynamic_reloc in
objdump (bsc#1120640)

CVE-2019-1010180: Fixed an out of bound memory access that could lead
to crashes (bsc#1142772)

enable xtensa architecture (Tensilica lc6 and related)

Use -ffat-lto-objects in order to provide assembly for static libs
(bsc#1141913).

Fixed some LTO build issues (bsc#1133131 bsc#1133232).

riscv: Don't check ABI flags if no code section

Fixed a segfault in ld when building some versions of pacemaker
(bsc#1154025, bsc#1154016).

Add avr, epiphany and rx to target_list so that the common binutils
can handle all objects we can create with crosses (bsc#1152590).

Update to binutils 2.32: The binutils now support for the C-SKY
processor series.

The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions. It also has a new

-mx86-used-note=[yes|no] option to generate (or not) x86 GNU property
notes.

The MIPS assembler now supports the Loongson EXTensions R2 (EXT2), the
Loongson EXTensions (EXT) instructions, the Loongson Content Address
Memory (CAM) ASE and the Loongson MultiMedia extensions Instructions
(MMI) ASE.

The addr2line, c++filt, nm and objdump tools now have a default limit
on the maximum amount of recursion that is allowed whilst demangling
strings. This limit can be disabled if necessary.

Objdump's --disassemble option can now take a parameter, specifying
the starting symbol for disassembly. Disassembly will continue from
this symbol up to the next symbol or the end of the function.

The BFD linker will now report property change in linker map file when
merging GNU properties.

The BFD linker's -t option now doesn't report members within archives,
unless -t is given twice. This makes it more useful when generating a
list of files that should be packaged for a linker bug report.

The GOLD linker has improved warning messages for relocations that
refer to discarded sections.

Improve relro support on s390 [fate#326356]

Fix broken debug symbols (bsc#1118644)

Handle ELF compressed header alignment correctly.

Note that Tenable Network Security has extracted the preceding
description block directly from the SUSE security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues."
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109412"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109413"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1109414"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1111996"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1112534"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1112535"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113247"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113252"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1113255"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1116827"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118644"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118830"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1118831"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1120640"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121034"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121035"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1121056"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1133131"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1133232"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1141913"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1142772"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1152590"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1154016"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://bugzilla.suse.com/show_bug.cgi?id=1154025"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-1000876/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17358/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17359/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17360/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-17985/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18309/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18483/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18484/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18605/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18606/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-18607/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-19931/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-19932/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20623/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20651/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-20671/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6323/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6543/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6759/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-6872/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7208/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7568/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7569/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7570/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7642/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-7643/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2018-8945/"
  );
  script_set_attribute(
    attribute:"see_also",
    value:"https://www.suse.com/security/cve/CVE-2019-1010180/"
  );
  # https://www.suse.com/support/update/announcement/2019/suse-su-20192779-1/
  script_set_attribute(
    attribute:"see_also",
    value:"http://www.nessus.org/u?9f92e1f7"
  );
  script_set_attribute(
    attribute:"solution", 
    value:
"To install this SUSE Security Update use the SUSE recommended
installation methods like YaST online_update or 'zypper patch'.

Alternatively you can run the command listed for your product :

SUSE Linux Enterprise Module for Packagehub Subpackages 15-SP1:zypper
in -t patch SUSE-SLE-Module-Packagehub-Subpackages-15-SP1-2019-2779=1

SUSE Linux Enterprise Module for Open Buildservice Development Tools
15-SP1:zypper in -t patch
SUSE-SLE-Module-Development-Tools-OBS-15-SP1-2019-2779=1

SUSE Linux Enterprise Module for Development Tools 15-SP1:zypper in -t
patch SUSE-SLE-Module-Development-Tools-15-SP1-2019-2779=1

SUSE Linux Enterprise Module for Basesystem 15-SP1:zypper in -t patch
SUSE-SLE-Module-Basesystem-15-SP1-2019-2779=1"
  );
  script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:P/I:P/A:P");
  script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
  script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H");
  script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2019-1010180");
  script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"true");

  script_set_attribute(attribute:"plugin_type", value:"local");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-devel");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-gold");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-gold-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-aarch64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-aarch64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-aarch64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-arm-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-arm-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-arm-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-avr-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-avr-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-avr-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-epiphany-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-epiphany-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-epiphany-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-hppa64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-i386-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-i386-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-i386-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ia64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ia64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ia64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-m68k-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-m68k-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-m68k-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-mips-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-mips-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-mips-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64le-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64le-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-ppc64le-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-riscv64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-riscv64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-riscv64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-rx-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-rx-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-rx-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390x-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390x-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-s390x-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-sparc64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-spu-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-spu-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-spu-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-x86_64-binutils");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-x86_64-binutils-debuginfo");
  script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:cross-x86_64-binutils-debugsource");
  script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:15");

  script_set_attribute(attribute:"vuln_publication_date", value:"2018/01/26");
  script_set_attribute(attribute:"patch_publication_date", value:"2019/10/24");
  script_set_attribute(attribute:"plugin_publication_date", value:"2019/10/25");
  script_set_attribute(attribute:"generated_plugin", value:"current");
  script_end_attributes();

  script_category(ACT_GATHER_INFO);
  script_copyright(english:"This script is Copyright (C) 2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
  script_family(english:"SuSE Local Security Checks");

  script_dependencies("ssh_get_info.nasl");
  script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");

  exit(0);
}


include("audit.inc");
include("global_settings.inc");
include("rpm.inc");


if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
os_ver = os_ver[1];
if (! preg(pattern:"^(SLED15|SLES15)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED15 / SLES15", "SUSE " + os_ver);

if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);

cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);

sp = get_kb_item("Host/SuSE/patchlevel");
if (isnull(sp)) sp = "0";
if (os_ver == "SLES15" && (! preg(pattern:"^(1)$", string:sp))) audit(AUDIT_OS_NOT, "SLES15 SP1", os_ver + " SP" + sp);
if (os_ver == "SLED15" && (! preg(pattern:"^(1)$", string:sp))) audit(AUDIT_OS_NOT, "SLED15 SP1", os_ver + " SP" + sp);


flag = 0;
if (rpm_check(release:"SLES15", sp:"1", cpu:"x86_64", reference:"cross-s390x-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"x86_64", reference:"cross-s390x-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"x86_64", reference:"cross-s390x-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"x86_64", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"x86_64", reference:"binutils-devel-32bit-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"s390x", reference:"cross-x86_64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"s390x", reference:"cross-x86_64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", cpu:"s390x", reference:"cross-x86_64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-gold-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-gold-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-gold-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-gold-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-arm-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-arm-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-arm-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-avr-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-avr-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-avr-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-epiphany-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-epiphany-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-epiphany-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-hppa-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-hppa-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-hppa-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-hppa64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-hppa64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-hppa64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-i386-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-i386-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-i386-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ia64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ia64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ia64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-m68k-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-m68k-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-m68k-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-mips-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-mips-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-mips-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-riscv64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-riscv64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-riscv64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-rx-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-rx-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-rx-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-s390-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-s390-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-s390-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-sparc-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-sparc-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-sparc-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-sparc64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-sparc64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-sparc64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-spu-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-spu-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-spu-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-aarch64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-aarch64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-aarch64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc64le-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc64le-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"cross-ppc64le-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"binutils-devel-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"x86_64", reference:"cross-s390x-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"x86_64", reference:"cross-s390x-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"x86_64", reference:"cross-s390x-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"x86_64", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"x86_64", reference:"binutils-devel-32bit-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"s390x", reference:"cross-x86_64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"s390x", reference:"cross-x86_64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", cpu:"s390x", reference:"cross-x86_64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-gold-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-gold-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-gold-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-gold-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-arm-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-arm-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-arm-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-avr-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-avr-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-avr-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-epiphany-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-epiphany-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-epiphany-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-hppa-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-hppa-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-hppa-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-hppa64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-hppa64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-hppa64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-i386-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-i386-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-i386-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ia64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ia64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ia64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-m68k-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-m68k-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-m68k-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-mips-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-mips-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-mips-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-riscv64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-riscv64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-riscv64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-rx-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-rx-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-rx-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-s390-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-s390-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-s390-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-sparc-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-sparc-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-sparc-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-sparc64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-sparc64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-sparc64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-spu-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-spu-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-spu-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-aarch64-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-aarch64-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-aarch64-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc64le-binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc64le-binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"cross-ppc64le-binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-debuginfo-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-debugsource-2.32-7.5.1")) flag++;
if (rpm_check(release:"SLED15", sp:"1", reference:"binutils-devel-2.32-7.5.1")) flag++;


if (flag)
{
  if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
  else security_warning(0);
  exit(0);
}
else
{
  tested = pkg_tests_get();
  if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
  else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils");
}

References