Vulnerabilities > CVE-2018-16847 - Out-of-bounds Read vulnerability in multiple products

047910
CVSS 4.6 - MEDIUM
Attack vector
LOCAL
Attack complexity
LOW
Privileges required
NONE
Confidentiality impact
PARTIAL
Integrity impact
PARTIAL
Availability impact
PARTIAL
local
low complexity
qemu
canonical
CWE-125
nessus

Summary

An OOB heap buffer r/w access issue was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process.

Vulnerable Configurations

Part Description Count
Application
Qemu
177
OS
Canonical
4

Common Weakness Enumeration (CWE)

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Overread Buffers
    An adversary attacks a target by providing input that causes an application to read beyond the boundary of a defined buffer. This typically occurs when a value influencing where to start or stop reading is set to reflect positions outside of the valid memory location of the buffer. This type of attack may result in exposure of sensitive information, a system crash, or arbitrary code execution.

Nessus

  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-3927-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-03-18
    modified2019-01-02
    plugin id120171
    published2019-01-02
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/120171
    titleSUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2018:3927-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:3927-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(120171);
      script_version("1.3");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/03/16");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-15746", "CVE-2018-16847", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849");
    
      script_name(english:"SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2018:3927-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issues fixed :
    
    CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable
    to an integer overflow, which could lead to buffer overflow issue. It
    could occur when receiving packets over the network. A user inside
    guest could use this flaw to crash the Qemu process resulting in DoS
    (bsc#1110910).
    
    CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest
    users to cause a denial of service (guest crash) by leveraging
    mishandling of the seccomp policy for threads other than the main
    thread (bsc#1106222).
    
    CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was
    found in the NVM Express Controller emulation in QEMU. It could occur
    in nvme_cmb_ops routines in nvme device. A guest user/process could
    use this flaw to crash the QEMU process resulting in DoS or
    potentially run arbitrary code with privileges of the QEMU process
    (bsc#1114529).
    
    CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in
    hw/net/rtl8139.c because an incorrect integer data type is used
    (bsc#1111006).
    
    CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in
    hw/net/pcnet.c because an incorrect integer data type is used
    (bsc#1111010).
    
    CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that
    accepts packet sizes greater than INT_MAX, which allows attackers to
    cause a denial of service or possibly have unspecified other impact.
    (bsc#1111013)
    
    CVE-2018-18849: Fixed an out of bounds memory access issue that was
    found in the LSI53C895A SCSI Host Bus Adapter emulation while writing
    a message in lsi_do_msgin. It could occur during migration if the
    'msg_len' field has an invalid value. A user/process could use this
    flaw to crash the Qemu process resulting in DoS (bsc#1114422).
    
    Non-security issues fixed: Fix slowness in arm32 emulation
    (bsc#1112499).
    
    In order to improve spectre mitigation for s390x, add a new feature in
    the QEMU cpu model to provide the etoken cpu feature for guests
    (bsc#1107489).
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1106222"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1107489"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1110910"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111006"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111010"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111013"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1112499"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1114422"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1114529"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-10839/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-15746/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-16847/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17958/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17962/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17963/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-18849/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20183927-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?5557eaad"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Module for Server Applications 15:zypper in -t
    patch SUSE-SLE-Module-Server-Applications-15-2018-2794=1
    
    SUSE Linux Enterprise Module for Open Buildservice Development Tools
    15:zypper in -t patch
    SUSE-SLE-Module-Development-Tools-OBS-15-2018-2794=1
    
    SUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch
    SUSE-SLE-Module-Basesystem-15-2018-2794=1"
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-dmg");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-dmg-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-extra");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-extra-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:15");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/08/29");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/11/27");
      script_set_attribute(attribute:"plugin_publication_date", value:"2019/01/02");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED15|SLES15)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED15 / SLES15", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLES15 SP0", os_ver + " SP" + sp);
    if (os_ver == "SLED15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLED15 SP0", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"qemu-x86-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"s390x", reference:"qemu-s390-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"s390x", reference:"qemu-s390-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-curl-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-curl-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-iscsi-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-iscsi-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-rbd-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-rbd-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-ssh-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-ssh-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-guest-agent-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-guest-agent-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-lang-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-kvm-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-dmg-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-dmg-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-extra-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-extra-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-2.11.2-9.12.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-debuginfo-2.11.2-9.12.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-debugsource-2.11.2-9.12.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-tools-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-tools-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-block-dmg-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-block-dmg-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debugsource-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-extra-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-extra-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-2.11.2-9.12.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-debuginfo-2.11.2-9.12.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-debugsource-2.11.2-9.12.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debugsource-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-tools-2.11.2-9.12.2")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-tools-debuginfo-2.11.2-9.12.2")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-4185-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-03-28
    modified2018-12-19
    plugin id119763
    published2018-12-19
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119763
    titleSUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2018:4185-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:4185-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(119763);
      script_version("1.3");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/03/27");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-15746", "CVE-2018-16847", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849");
    
      script_name(english:"SUSE SLED12 / SLES12 Security Update : qemu (SUSE-SU-2018:4185-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issues fixed :
    
    CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable
    to an integer overflow, which could lead to buffer overflow issue. It
    could occur when receiving packets over the network. A user inside
    guest could use this flaw to crash the Qemu process resulting in DoS
    (bsc#1110910).
    
    CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest
    users to cause a denial of service (guest crash) by leveraging
    mishandling of the seccomp policy for threads other than the main
    thread (bsc#1106222).
    
    CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in
    hw/net/rtl8139.c because an incorrect integer data type is used
    (bsc#1111006).
    
    CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in
    hw/net/pcnet.c because an incorrect integer data type is used
    (bsc#1111010).
    
    CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that
    accepts packet sizes greater than INT_MAX, which allows attackers to
    cause a denial of service or possibly have unspecified other impact.
    (bsc#1111013)
    
    CVE-2018-18849: Fixed an out of bounds memory access issue that was
    found in the LSI53C895A SCSI Host Bus Adapter emulation while writing
    a message in lsi_do_msgin. It could occur during migration if the
    'msg_len' field has an invalid value. A user/process could use this
    flaw to crash the Qemu process resulting in DoS (bsc#1114422).
    
    CVE-2018-16847: Fixed an out of bounds r/w buffer access in cmb
    operations (bsc#1114529).
    
    Non-security issue fixed: Fixed a condition when retry logic does not
    have been executed in case of data transmit failure or connection
    hungup (bsc#1108474).
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1106222"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1108474"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1110910"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111006"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111010"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1111013"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1114422"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1114529"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-10839/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-15746/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-16847/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17958/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17962/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-17963/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-18849/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20184185-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?1fe62767"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Server 12-SP4:zypper in -t patch
    SUSE-SLE-SERVER-12-SP4-2018-2983=1
    
    SUSE Linux Enterprise Desktop 12-SP4:zypper in -t patch
    SUSE-SLE-DESKTOP-12-SP4-2018-2983=1"
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/08/29");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/12/19");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/12/19");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES12" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP4", os_ver + " SP" + sp);
    if (os_ver == "SLED12" && (! preg(pattern:"^(4)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP4", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES12", sp:"4", cpu:"x86_64", reference:"qemu-block-rbd-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", cpu:"x86_64", reference:"qemu-block-rbd-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", cpu:"x86_64", reference:"qemu-x86-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", cpu:"s390x", reference:"qemu-s390-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", cpu:"s390x", reference:"qemu-s390-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-curl-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-curl-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-iscsi-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-iscsi-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-ssh-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-block-ssh-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-debugsource-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-guest-agent-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-guest-agent-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-lang-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-tools-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-tools-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLES12", sp:"4", reference:"qemu-kvm-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-block-curl-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-block-curl-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-debugsource-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-kvm-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-tools-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-tools-debuginfo-2.11.2-5.5.1")) flag++;
    if (rpm_check(release:"SLED12", sp:"4", cpu:"x86_64", reference:"qemu-x86-2.11.2-5.5.1")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2018-1483.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : - CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). - CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). - CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). - CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). - CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) - CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-05
    modified2018-12-07
    plugin id119491
    published2018-12-07
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119491
    titleopenSUSE Security Update : qemu (openSUSE-2018-1483)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from openSUSE Security Update openSUSE-2018-1483.
    #
    # The text description of this plugin is (C) SUSE LLC.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(119491);
      script_version("1.2");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-15746", "CVE-2018-16847", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849");
    
      script_name(english:"openSUSE Security Update : qemu (openSUSE-2018-1483)");
      script_summary(english:"Check for the openSUSE-2018-1483 patch");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote openSUSE host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issues fixed :
    
      - CVE-2018-10839: Fixed NE2000 NIC emulation support that
        is vulnerable to an integer overflow, which could lead
        to buffer overflow issue. It could occur when receiving
        packets over the network. A user inside guest could use
        this flaw to crash the Qemu process resulting in DoS
        (bsc#1110910).
    
      - CVE-2018-15746: Fixed qemu-seccomp.c that might allow
        local OS guest users to cause a denial of service (guest
        crash) by leveraging mishandling of the seccomp policy
        for threads other than the main thread (bsc#1106222).
    
      - CVE-2018-16847: Fixed an OOB heap buffer r/w access
        issue that was found in the NVM Express Controller
        emulation in QEMU. It could occur in nvme_cmb_ops
        routines in nvme device. A guest user/process could use
        this flaw to crash the QEMU process resulting in DoS or
        potentially run arbitrary code with privileges of the
        QEMU process (bsc#1114529).
    
      - CVE-2018-17958: Fixed a Buffer Overflow in
        rtl8139_do_receive in hw/net/rtl8139.c because an
        incorrect integer data type is used (bsc#1111006).
    
      - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive
        in hw/net/pcnet.c because an incorrect integer data type
        is used (bsc#1111010).
    
      - CVE-2018-17963: Fixed qemu_deliver_packet_iov in
        net/net.c that accepts packet sizes greater than
        INT_MAX, which allows attackers to cause a denial of
        service or possibly have unspecified other impact.
        (bsc#1111013)
    
      - CVE-2018-18849: Fixed an out of bounds memory access
        issue that was found in the LSI53C895A SCSI Host Bus
        Adapter emulation while writing a message in
        lsi_do_msgin. It could occur during migration if the
        'msg_len' field has an invalid value. A user/process
        could use this flaw to crash the Qemu process resulting
        in DoS (bsc#1114422).
    
    Non-security issues fixed :
    
      - Fix slowness in arm32 emulation (bsc#1112499).
    
      - In order to improve spectre mitigation for s390x, add a
        new feature in the QEMU cpu model to provide the etoken
        cpu feature for guests (bsc#1107489).
    
    This update was imported from the SUSE:SLE-15:Update update project."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1106222"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1107489"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1110910"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111006"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111010"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111013"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112499"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114422"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114529"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected qemu packages.");
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ipxe");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ksm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-seabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-sgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-testsuite");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-vgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.0");
    
      script_set_attribute(attribute:"patch_publication_date", value:"2018/12/06");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/12/07");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
    if (release !~ "^(SUSE15\.0)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.0", release);
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    ourarch = get_kb_item("Host/cpu");
    if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
    if (ourarch !~ "^(x86_64)$") audit(AUDIT_ARCH_NOT, "x86_64", ourarch);
    
    flag = 0;
    
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debugsource-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ipxe-1.0.0+-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ksm-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-kvm-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-lang-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debugsource-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-seabios-1.11.0-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-sgabios-8-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-testsuite-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-vgabios-1.11.0-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-linux-user / qemu-linux-user-debuginfo / etc");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2018-1551.NASL
    descriptionThis update for qemu fixes the following issues : Security issue fixed : - CVE-2018-16847: Fixed an out of bounds r/w buffer access in cmb operations (bsc#1114529). Non-security issue fixed : - Fixed serial console issue that triggered a qemu-kvm bug (bsc#1108474). This update was imported from the SUSE:SLE-15:Update update project.
    last seen2020-06-05
    modified2018-12-17
    plugin id119710
    published2018-12-17
    reporterThis script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119710
    titleopenSUSE Security Update : qemu (openSUSE-2018-1551)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from openSUSE Security Update openSUSE-2018-1551.
    #
    # The text description of this plugin is (C) SUSE LLC.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(119710);
      script_version("1.3");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2018-16847");
    
      script_name(english:"openSUSE Security Update : qemu (openSUSE-2018-1551)");
      script_summary(english:"Check for the openSUSE-2018-1551 patch");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote openSUSE host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issue fixed :
    
      - CVE-2018-16847: Fixed an out of bounds r/w buffer access
        in cmb operations (bsc#1114529).
    
    Non-security issue fixed :
    
      - Fixed serial console issue that triggered a qemu-kvm bug
        (bsc#1108474).
    
    This update was imported from the SUSE:SLE-15:Update update project."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1108474"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114529"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected qemu packages.");
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ipxe");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ksm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-seabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-sgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-testsuite");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-vgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.0");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/11/02");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/12/15");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/12/17");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
    if (release !~ "^(SUSE15\.0)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.0", release);
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    ourarch = get_kb_item("Host/cpu");
    if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
    if (ourarch !~ "^(x86_64)$") audit(AUDIT_ARCH_NOT, "x86_64", ourarch);
    
    flag = 0;
    
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debugsource-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ipxe-1.0.0+-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ksm-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-kvm-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-lang-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debugsource-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-seabios-1.11.0-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-sgabios-8-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-testsuite-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-vgabios-1.11.0-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
      else security_warning(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-linux-user / qemu-linux-user-debuginfo / etc");
    }
    
  • NASL familyUbuntu Local Security Checks
    NASL idUBUNTU_USN-3826-1.NASL
    descriptionDaniel Shapira and Arash Tohidi discovered that QEMU incorrectly handled NE2000 device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-10839) It was discovered that QEMU incorrectly handled the Slirp networking back-end. A privileged attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. This issue only affected Ubuntu 14.04 LTS, Ubuntu 16.04 LTS and Ubuntu 18.04 LTS. (CVE-2018-11806) Fakhri Zulkifli discovered that the QEMU guest agent incorrectly handled certain QMP commands. An attacker could possibly use this issue to crash the QEMU guest agent, resulting in a denial of service. (CVE-2018-12617) Li Qiang discovered that QEMU incorrectly handled NVM Express Controller emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service, or possibly execute arbitrary code on the host. In the default installation, when QEMU is used with libvirt, attackers would be isolated by the libvirt AppArmor profile. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-16847) Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly handled RTL8139 device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-17958) Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly handled PCNET device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-17962) Daniel Shapira discovered that QEMU incorrectly handled large packet sizes. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-17963) It was discovered that QEMU incorrectly handled LSI53C895A device emulation. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-18849) Moguofang discovered that QEMU incorrectly handled the IPowerNV LPC controller. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. This issue only affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-18954) Zhibin Hu discovered that QEMU incorrectly handled the Plan 9 File System support. An attacker inside the guest could use this issue to cause QEMU to crash, resulting in a denial of service. (CVE-2018-19364). Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id119216
    published2018-11-27
    reporterUbuntu Security Notice (C) 2018-2019 Canonical, Inc. / NASL script (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/119216
    titleUbuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 18.10 : qemu vulnerabilities (USN-3826-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from Ubuntu Security Notice USN-3826-1. The text 
    # itself is copyright (C) Canonical, Inc. See 
    # <http://www.ubuntu.com/usn/>. Ubuntu(R) is a registered 
    # trademark of Canonical, Inc.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(119216);
      script_version("1.3");
      script_cvs_date("Date: 2019/09/18 12:31:49");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-11806", "CVE-2018-12617", "CVE-2018-16847", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849", "CVE-2018-18954", "CVE-2018-19364");
      script_xref(name:"USN", value:"3826-1");
    
      script_name(english:"Ubuntu 14.04 LTS / 16.04 LTS / 18.04 LTS / 18.10 : qemu vulnerabilities (USN-3826-1)");
      script_summary(english:"Checks dpkg output for updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:
    "The remote Ubuntu host is missing one or more security-related
    patches."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly
    handled NE2000 device emulation. An attacker inside the guest could
    use this issue to cause QEMU to crash, resulting in a denial of
    service. (CVE-2018-10839)
    
    It was discovered that QEMU incorrectly handled the Slirp networking
    back-end. A privileged attacker inside the guest could use this issue
    to cause QEMU to crash, resulting in a denial of service, or possibly
    execute arbitrary code on the host. In the default installation, when
    QEMU is used with libvirt, attackers would be isolated by the libvirt
    AppArmor profile. This issue only affected Ubuntu 14.04 LTS, Ubuntu
    16.04 LTS and Ubuntu 18.04 LTS. (CVE-2018-11806)
    
    Fakhri Zulkifli discovered that the QEMU guest agent incorrectly
    handled certain QMP commands. An attacker could possibly use this
    issue to crash the QEMU guest agent, resulting in a denial of service.
    (CVE-2018-12617)
    
    Li Qiang discovered that QEMU incorrectly handled NVM Express
    Controller emulation. An attacker inside the guest could use this
    issue to cause QEMU to crash, resulting in a denial of service, or
    possibly execute arbitrary code on the host. In the default
    installation, when QEMU is used with libvirt, attackers would be
    isolated by the libvirt AppArmor profile. This issue only affected
    Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-16847)
    
    Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly
    handled RTL8139 device emulation. An attacker inside the guest could
    use this issue to cause QEMU to crash, resulting in a denial of
    service. (CVE-2018-17958)
    
    Daniel Shapira and Arash Tohidi discovered that QEMU incorrectly
    handled PCNET device emulation. An attacker inside the guest could use
    this issue to cause QEMU to crash, resulting in a denial of service.
    (CVE-2018-17962)
    
    Daniel Shapira discovered that QEMU incorrectly handled large packet
    sizes. An attacker inside the guest could use this issue to cause QEMU
    to crash, resulting in a denial of service. (CVE-2018-17963)
    
    It was discovered that QEMU incorrectly handled LSI53C895A device
    emulation. An attacker inside the guest could use this issue to cause
    QEMU to crash, resulting in a denial of service. (CVE-2018-18849)
    
    Moguofang discovered that QEMU incorrectly handled the IPowerNV LPC
    controller. An attacker inside the guest could use this issue to cause
    QEMU to crash, resulting in a denial of service. This issue only
    affected Ubuntu 18.04 LTS and Ubuntu 18.10. (CVE-2018-18954)
    
    Zhibin Hu discovered that QEMU incorrectly handled the Plan 9 File
    System support. An attacker inside the guest could use this issue to
    cause QEMU to crash, resulting in a denial of service.
    (CVE-2018-19364).
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the Ubuntu security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://usn.ubuntu.com/3826-1/"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected packages.");
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"true");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-aarch64");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-arm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-mips");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-misc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-ppc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-s390x");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-sparc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:canonical:ubuntu_linux:qemu-system-x86");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:14.04");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:16.04");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:18.04:-:lts");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:canonical:ubuntu_linux:18.10");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/06/13");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/11/26");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/11/27");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"Ubuntu Security Notice (C) 2018-2019 Canonical, Inc. / NASL script (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"Ubuntu Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/cpu", "Host/Ubuntu", "Host/Ubuntu/release", "Host/Debian/dpkg-l");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("ubuntu.inc");
    include("misc_func.inc");
    
    if ( ! get_kb_item("Host/local_checks_enabled") ) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/Ubuntu/release");
    if ( isnull(release) ) audit(AUDIT_OS_NOT, "Ubuntu");
    release = chomp(release);
    if (! preg(pattern:"^(14\.04|16\.04|18\.04|18\.10)$", string:release)) audit(AUDIT_OS_NOT, "Ubuntu 14.04 / 16.04 / 18.04 / 18.10", "Ubuntu " + release);
    if ( ! get_kb_item("Host/Debian/dpkg-l") ) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Ubuntu", cpu);
    
    flag = 0;
    
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-aarch64", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-arm", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-mips", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-misc", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-ppc", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-sparc", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"14.04", pkgname:"qemu-system-x86", pkgver:"2.0.0+dfsg-2ubuntu1.44")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-aarch64", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-arm", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-mips", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-misc", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-ppc", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-s390x", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-sparc", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"16.04", pkgname:"qemu-system-x86", pkgver:"1:2.5+dfsg-5ubuntu10.33")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-arm", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-mips", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-misc", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-ppc", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-s390x", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-sparc", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.04", pkgname:"qemu-system-x86", pkgver:"1:2.11+dfsg-1ubuntu7.8")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-arm", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-mips", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-misc", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-ppc", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-s390x", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-sparc", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    if (ubuntu_check(osver:"18.10", pkgname:"qemu-system-x86", pkgver:"1:2.12+dfsg-3ubuntu8.1")) flag++;
    
    if (flag)
    {
      security_report_v4(
        port       : 0,
        severity   : SECURITY_HOLE,
        extra      : ubuntu_report_get()
      );
      exit(0);
    }
    else
    {
      tested = ubuntu_pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-system / qemu-system-aarch64 / qemu-system-arm / etc");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2019-1005.NASL
    descriptionThis update for qemu fixes the following issues : Security issue fixed : - CVE-2018-16847: Fixed an out of bounds r/w buffer access in cmb operations (bsc#1114529). Non-security issue fixed : - Fixed serial console issue that triggered a qemu-kvm bug (bsc#1108474). This update was imported from the SUSE:SLE-15:Update update project.
    last seen2020-06-01
    modified2020-06-02
    plugin id123149
    published2019-03-27
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/123149
    titleopenSUSE Security Update : qemu (openSUSE-2019-1005)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from openSUSE Security Update openSUSE-2019-1005.
    #
    # The text description of this plugin is (C) SUSE LLC.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(123149);
      script_version("1.2");
      script_cvs_date("Date: 2020/02/03");
    
      script_cve_id("CVE-2018-16847");
    
      script_name(english:"openSUSE Security Update : qemu (openSUSE-2019-1005)");
      script_summary(english:"Check for the openSUSE-2019-1005 patch");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote openSUSE host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issue fixed :
    
      - CVE-2018-16847: Fixed an out of bounds r/w buffer access
        in cmb operations (bsc#1114529).
    
    Non-security issue fixed :
    
      - Fixed serial console issue that triggered a qemu-kvm bug
        (bsc#1108474).
    
    This update was imported from the SUSE:SLE-15:Update update project."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1108474"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114529"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected qemu packages.");
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ipxe");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ksm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-seabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-sgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-testsuite");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-vgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.0");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/11/02");
      script_set_attribute(attribute:"patch_publication_date", value:"2019/03/23");
      script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/27");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
    if (release !~ "^(SUSE15\.0)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.0", release);
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    ourarch = get_kb_item("Host/cpu");
    if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
    if (ourarch !~ "^(x86_64)$") audit(AUDIT_ARCH_NOT, "x86_64", ourarch);
    
    flag = 0;
    
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debugsource-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ipxe-1.0.0+-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ksm-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-kvm-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-lang-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debugsource-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-seabios-1.11.0-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-sgabios-8-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-testsuite-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-vgabios-1.11.0-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-2.11.2-lp150.7.15.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-debuginfo-2.11.2-lp150.7.15.1") ) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
      else security_warning(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-linux-user / qemu-linux-user-debuginfo / etc");
    }
    
  • NASL familyFedora Local Security Checks
    NASL idFEDORA_2018-87F2ACE20D.NASL
    description - Fix cpu model crash on AMD hosts (bz #1640140) - CVE-2018-15746: seccomp blacklist is not applied to all threads (bz #1618357) - Fix assertion in address_space_stw_le_cached (bz #1644728) - CVE-2018-10839: ne2000: fix possible out of bound access (bz #1636429) - CVE-2018-17958: rtl8139: fix possible out of bound access (bz #1636729) - CVE-2018-17962: pcnet: fix possible buffer overflow (bz #1636775) - CVE-2018-17963: net: ignore packet size greater than INT_MAX (bz #1636782) - CVE-2018-18849: lsi53c895a: OOB msg buffer access leads to DoS (bz #1644977) - CVE-2018-18954: ppc64: Out-of-bounds r/w stack access in pnv_lpc_do_eccb (bz #1645442) Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-05
    modified2019-01-03
    plugin id120587
    published2019-01-03
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/120587
    titleFedora 29 : 2:qemu (2018-87f2ace20d)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were  
    # extracted from Fedora Security Advisory FEDORA-2018-87f2ace20d.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(120587);
      script_version("1.4");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-15746", "CVE-2018-16847", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849", "CVE-2018-18954");
      script_xref(name:"FEDORA", value:"2018-87f2ace20d");
    
      script_name(english:"Fedora 29 : 2:qemu (2018-87f2ace20d)");
      script_summary(english:"Checks rpm output for the updated package.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote Fedora host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "  - Fix cpu model crash on AMD hosts (bz #1640140)
    
      - CVE-2018-15746: seccomp blacklist is not applied to all
        threads (bz #1618357)
    
      - Fix assertion in address_space_stw_le_cached (bz
        #1644728)
    
      - CVE-2018-10839: ne2000: fix possible out of bound access
        (bz #1636429)
    
      - CVE-2018-17958: rtl8139: fix possible out of bound
        access (bz #1636729)
    
      - CVE-2018-17962: pcnet: fix possible buffer overflow (bz
        #1636775)
    
      - CVE-2018-17963: net: ignore packet size greater than
        INT_MAX (bz #1636782)
    
      - CVE-2018-18849: lsi53c895a: OOB msg buffer access leads
        to DoS (bz #1644977)
    
      - CVE-2018-18954: ppc64: Out-of-bounds r/w stack access in
        pnv_lpc_do_eccb (bz #1645442)
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the Fedora update system website.
    Tenable has attempted to automatically clean and format it as much as
    possible without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bodhi.fedoraproject.org/updates/FEDORA-2018-87f2ace20d"
      );
      script_set_attribute(
        attribute:"solution", 
        value:"Update the affected 2:qemu package."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:fedoraproject:fedora:2:qemu");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:fedoraproject:fedora:29");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/08/29");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/12/04");
      script_set_attribute(attribute:"plugin_publication_date", value:"2019/01/03");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"Fedora Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/RedHat/release", "Host/RedHat/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/RedHat/release");
    if (isnull(release) || "Fedora" >!< release) audit(AUDIT_OS_NOT, "Fedora");
    os_ver = pregmatch(pattern: "Fedora.*release ([0-9]+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "Fedora");
    os_ver = os_ver[1];
    if (! preg(pattern:"^29([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "Fedora 29", "Fedora " + os_ver);
    
    if (!get_kb_item("Host/RedHat/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "Fedora", cpu);
    
    
    flag = 0;
    if (rpm_check(release:"FC29", reference:"qemu-3.0.0-2.fc29", epoch:"2")) flag++;
    
    
    if (flag)
    {
      security_report_v4(
        port       : 0,
        severity   : SECURITY_HOLE,
        extra      : rpm_report_get()
      );
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "2:qemu");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-4086-1.NASL
    descriptionThis update for qemu fixes the following issues : Security issue fixed : CVE-2018-16847: Fixed an out of bounds r/w buffer access in cmb operations (bsc#1114529). Non-security issue fixed: Fixed serial console issue in SLES 12 SP2 that triggered a qemu-kvm bug (bsc#1108474). Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-03-18
    modified2019-01-02
    plugin id120185
    published2019-01-02
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/120185
    titleSUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2018:4086-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:4086-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(120185);
      script_version("1.4");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/03/16");
    
      script_cve_id("CVE-2018-16847");
    
      script_name(english:"SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2018:4086-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issue fixed :
    
    CVE-2018-16847: Fixed an out of bounds r/w buffer access in cmb
    operations (bsc#1114529).
    
    Non-security issue fixed: Fixed serial console issue in SLES 12 SP2
    that triggered a qemu-kvm bug (bsc#1108474).
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1108474"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1114529"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-16847/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20184086-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?fc316fe8"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Module for Server Applications 15:zypper in -t
    patch SUSE-SLE-Module-Server-Applications-15-2018-2913=1
    
    SUSE Linux Enterprise Module for Open Buildservice Development Tools
    15:zypper in -t patch
    SUSE-SLE-Module-Development-Tools-OBS-15-2018-2913=1
    
    SUSE Linux Enterprise Module for Basesystem 15:zypper in -t patch
    SUSE-SLE-Module-Basesystem-15-2018-2913=1"
      );
      script_set_cvss_base_vector("CVSS2#AV:L/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-dmg");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-dmg-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-extra");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-extra-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-linux-user-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:15");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/11/02");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/12/12");
      script_set_attribute(attribute:"plugin_publication_date", value:"2019/01/02");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED15|SLES15)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED15 / SLES15", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLES15 SP0", os_ver + " SP" + sp);
    if (os_ver == "SLED15" && (! preg(pattern:"^(0)$", string:sp))) audit(AUDIT_OS_NOT, "SLED15 SP0", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"qemu-x86-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"x86_64", reference:"qemu-x86-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"s390x", reference:"qemu-s390-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", cpu:"s390x", reference:"qemu-s390-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-curl-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-curl-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-iscsi-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-iscsi-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-rbd-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-rbd-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-ssh-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-ssh-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-guest-agent-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-guest-agent-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-lang-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-kvm-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-dmg-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-block-dmg-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-extra-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-extra-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-linux-user-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-tools-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLES15", sp:"0", reference:"qemu-tools-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-block-dmg-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-block-dmg-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-extra-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-extra-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-linux-user-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debuginfo-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-debugsource-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-tools-2.11.2-9.17.1")) flag++;
    if (rpm_check(release:"SLED15", sp:"0", reference:"qemu-tools-debuginfo-2.11.2-9.17.1")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
      else security_warning(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2019-961.NASL
    descriptionThis update for qemu fixes the following issues : Security issues fixed : - CVE-2018-10839: Fixed NE2000 NIC emulation support that is vulnerable to an integer overflow, which could lead to buffer overflow issue. It could occur when receiving packets over the network. A user inside guest could use this flaw to crash the Qemu process resulting in DoS (bsc#1110910). - CVE-2018-15746: Fixed qemu-seccomp.c that might allow local OS guest users to cause a denial of service (guest crash) by leveraging mishandling of the seccomp policy for threads other than the main thread (bsc#1106222). - CVE-2018-16847: Fixed an OOB heap buffer r/w access issue that was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process (bsc#1114529). - CVE-2018-17958: Fixed a Buffer Overflow in rtl8139_do_receive in hw/net/rtl8139.c because an incorrect integer data type is used (bsc#1111006). - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive in hw/net/pcnet.c because an incorrect integer data type is used (bsc#1111010). - CVE-2018-17963: Fixed qemu_deliver_packet_iov in net/net.c that accepts packet sizes greater than INT_MAX, which allows attackers to cause a denial of service or possibly have unspecified other impact. (bsc#1111013) - CVE-2018-18849: Fixed an out of bounds memory access issue that was found in the LSI53C895A SCSI Host Bus Adapter emulation while writing a message in lsi_do_msgin. It could occur during migration if the
    last seen2020-06-01
    modified2020-06-02
    plugin id123389
    published2019-03-27
    reporterThis script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/123389
    titleopenSUSE Security Update : qemu (openSUSE-2019-961)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from openSUSE Security Update openSUSE-2019-961.
    #
    # The text description of this plugin is (C) SUSE LLC.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(123389);
      script_version("1.2");
      script_cvs_date("Date: 2020/01/27");
    
      script_cve_id("CVE-2018-10839", "CVE-2018-15746", "CVE-2018-16847", "CVE-2018-17958", "CVE-2018-17962", "CVE-2018-17963", "CVE-2018-18849");
    
      script_name(english:"openSUSE Security Update : qemu (openSUSE-2019-961)");
      script_summary(english:"Check for the openSUSE-2019-961 patch");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote openSUSE host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for qemu fixes the following issues :
    
    Security issues fixed :
    
      - CVE-2018-10839: Fixed NE2000 NIC emulation support that
        is vulnerable to an integer overflow, which could lead
        to buffer overflow issue. It could occur when receiving
        packets over the network. A user inside guest could use
        this flaw to crash the Qemu process resulting in DoS
        (bsc#1110910).
    
      - CVE-2018-15746: Fixed qemu-seccomp.c that might allow
        local OS guest users to cause a denial of service (guest
        crash) by leveraging mishandling of the seccomp policy
        for threads other than the main thread (bsc#1106222).
    
      - CVE-2018-16847: Fixed an OOB heap buffer r/w access
        issue that was found in the NVM Express Controller
        emulation in QEMU. It could occur in nvme_cmb_ops
        routines in nvme device. A guest user/process could use
        this flaw to crash the QEMU process resulting in DoS or
        potentially run arbitrary code with privileges of the
        QEMU process (bsc#1114529).
    
      - CVE-2018-17958: Fixed a Buffer Overflow in
        rtl8139_do_receive in hw/net/rtl8139.c because an
        incorrect integer data type is used (bsc#1111006).
    
      - CVE-2018-17962: Fixed a Buffer Overflow in pcnet_receive
        in hw/net/pcnet.c because an incorrect integer data type
        is used (bsc#1111010).
    
      - CVE-2018-17963: Fixed qemu_deliver_packet_iov in
        net/net.c that accepts packet sizes greater than
        INT_MAX, which allows attackers to cause a denial of
        service or possibly have unspecified other impact.
        (bsc#1111013)
    
      - CVE-2018-18849: Fixed an out of bounds memory access
        issue that was found in the LSI53C895A SCSI Host Bus
        Adapter emulation while writing a message in
        lsi_do_msgin. It could occur during migration if the
        'msg_len' field has an invalid value. A user/process
        could use this flaw to crash the Qemu process resulting
        in DoS (bsc#1114422).
    
    Non-security issues fixed :
    
      - Fix slowness in arm32 emulation (bsc#1112499).
    
      - In order to improve spectre mitigation for s390x, add a
        new feature in the QEMU cpu model to provide the etoken
        cpu feature for guests (bsc#1107489).
    
    This update was imported from the SUSE:SLE-15:Update update project."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1106222"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1107489"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1110910"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111006"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111010"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1111013"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1112499"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114422"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1114529"
      );
      script_set_attribute(attribute:"solution", value:"Update the affected qemu packages.");
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:U/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:U/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"No known exploits are available");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-arm-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-curl-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-dmg-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-gluster-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-iscsi-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-rbd-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-block-ssh-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-extra-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-guest-agent-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ipxe");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ksm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-kvm");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-lang");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-linux-user-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-ppc-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-s390-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-seabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-sgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-testsuite");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-tools-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-vgabios");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:qemu-x86-debuginfo");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:15.0");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/08/29");
      script_set_attribute(attribute:"patch_publication_date", value:"2019/03/23");
      script_set_attribute(attribute:"plugin_publication_date", value:"2019/03/27");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2019-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
    if (release !~ "^(SUSE15\.0)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "15.0", release);
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    ourarch = get_kb_item("Host/cpu");
    if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
    if (ourarch !~ "^(x86_64)$") audit(AUDIT_ARCH_NOT, "x86_64", ourarch);
    
    flag = 0;
    
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-arm-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-curl-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-dmg-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-gluster-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-iscsi-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-rbd-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-block-ssh-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-debugsource-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-extra-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-guest-agent-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ipxe-1.0.0+-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ksm-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-kvm-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-lang-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-linux-user-debugsource-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-ppc-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-s390-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-seabios-1.11.0-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-sgabios-8-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-testsuite-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-tools-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-vgabios-1.11.0-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-2.11.2-lp150.7.12.1") ) flag++;
    if ( rpm_check(release:"SUSE15.0", reference:"qemu-x86-debuginfo-2.11.2-lp150.7.12.1") ) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "qemu-linux-user / qemu-linux-user-debuginfo / etc");
    }