Vulnerabilities > CVE-2018-12470 - SQL Injection vulnerability in Suse Subscription Management Tool

047910
CVSS 9.8 - CRITICAL
Attack vector
NETWORK
Attack complexity
LOW
Privileges required
NONE
Confidentiality impact
HIGH
Integrity impact
HIGH
Availability impact
HIGH
network
low complexity
suse
CWE-89
critical
nessus

Summary

A SQL Injection in the RegistrationSharing module of SUSE Linux SMT allows remote attackers to cause execute arbitrary SQL statements. Affected releases are SUSE Linux SMT: versions prior to 3.0.37.

Vulnerable Configurations

Part Description Count
Application
Suse
115

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Command Line Execution through SQL Injection
    An attacker uses standard SQL injection methods to inject data into the command line for execution. This could be done directly through misuse of directives such as MSSQL_xp_cmdshell or indirectly through injection of data into the database that would be interpreted as shell commands. Sometime later, an unscrupulous backend application (or could be part of the functionality of the same application) fetches the injected data stored in the database and uses this data as command line arguments without performing proper validation. The malicious data escapes that data plane by spawning new commands to be executed on the host.
  • Object Relational Mapping Injection
    An attacker leverages a weakness present in the database access layer code generated with an Object Relational Mapping (ORM) tool or a weakness in the way that a developer used a persistence framework to inject his or her own SQL commands to be executed against the underlying database. The attack here is similar to plain SQL injection, except that the application does not use JDBC to directly talk to the database, but instead it uses a data access layer generated by an ORM tool or framework (e.g. Hibernate). While most of the time code generated by an ORM tool contains safe access methods that are immune to SQL injection, sometimes either due to some weakness in the generated code or due to the fact that the developer failed to use the generated access methods properly, SQL injection is still possible.
  • SQL Injection through SOAP Parameter Tampering
    An attacker modifies the parameters of the SOAP message that is sent from the service consumer to the service provider to initiate a SQL injection attack. On the service provider side, the SOAP message is parsed and parameters are not properly validated before being used to access a database in a way that does not use parameter binding, thus enabling the attacker to control the structure of the executed SQL query. This pattern describes a SQL injection attack with the delivery mechanism being a SOAP message.
  • Expanding Control over the Operating System from the Database
    An attacker is able to leverage access gained to the database to read / write data to the file system, compromise the operating system, create a tunnel for accessing the host machine, and use this access to potentially attack other machines on the same network as the database machine. Traditionally SQL injections attacks are viewed as a way to gain unauthorized read access to the data stored in the database, modify the data in the database, delete the data, etc. However, almost every data base management system (DBMS) system includes facilities that if compromised allow an attacker complete access to the file system, operating system, and full access to the host running the database. The attacker can then use this privileged access to launch subsequent attacks. These facilities include dropping into a command shell, creating user defined functions that can call system level libraries present on the host machine, stored procedures, etc.
  • SQL Injection
    This attack exploits target software that constructs SQL statements based on user input. An attacker crafts input strings so that when the target software constructs SQL statements based on the input, the resulting SQL statement performs actions other than those the application intended. SQL Injection results from failure of the application to appropriately validate input. When specially crafted user-controlled input consisting of SQL syntax is used without proper validation as part of SQL queries, it is possible to glean information from the database in ways not envisaged during application design. Depending upon the database and the design of the application, it may also be possible to leverage injection to have the database execute system-related commands of the attackers' choice. SQL Injection enables an attacker to talk directly to the database, thus bypassing the application completely. Successful injection can cause information disclosure as well as ability to add or modify data in the database. In order to successfully inject SQL and retrieve information from a database, an attacker:

Nessus

  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-2898-2.NASL
    descriptionThis update for yast2-smt to 3.0.14 and smt to 3.0.37 fixes the following issues : These security issues were fixed in SMT : CVE-2018-12471: Xml External Entity processing in the RegistrationSharing modules allowed to read arbitrary file read (bsc#1103809). CVE-2018-12470: SQL injection in RegistrationSharing module allows remote attackers to run arbitrary SQL statements (bsc#1103810). CVE-2018-12472: Authentication bypass in sibling check facilitated further attacks on SMT (bsc#1104076). SUSE would like to thank Jake Miller for reporting these issues to us. These non-security issues were fixed in SMT: Fix cron jobs randomization (bsc#1097560) Fix duplicate migration paths (bsc#1097824) This non-security issue was fixed in yast2-smt: Remove cron job rescheduling (bsc#1097560) Added missing translation marks (bsc#1037811) Explicitly mention
    last seen2020-06-01
    modified2020-06-02
    plugin id118295
    published2018-10-22
    reporterThis script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/118295
    titleSUSE SLES12 Security Update : smt, yast2-smt (SUSE-SU-2018:2898-2)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:2898-2.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(118295);
      script_version("1.3");
      script_cvs_date("Date: 2019/09/10 13:51:49");
    
      script_cve_id("CVE-2018-12470", "CVE-2018-12471", "CVE-2018-12472");
    
      script_name(english:"SUSE SLES12 Security Update : smt, yast2-smt (SUSE-SU-2018:2898-2)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for yast2-smt to 3.0.14 and smt to 3.0.37 fixes the
    following issues :
    
    These security issues were fixed in SMT :
    
    CVE-2018-12471: Xml External Entity processing in the
    RegistrationSharing modules allowed to read arbitrary file read
    (bsc#1103809).
    
    CVE-2018-12470: SQL injection in RegistrationSharing module allows
    remote attackers to run arbitrary SQL statements (bsc#1103810).
    
    CVE-2018-12472: Authentication bypass in sibling check facilitated
    further attacks on SMT (bsc#1104076).
    
    SUSE would like to thank Jake Miller for reporting these issues to us.
    
    These non-security issues were fixed in SMT: Fix cron jobs
    randomization (bsc#1097560)
    
    Fix duplicate migration paths (bsc#1097824)
    
    This non-security issue was fixed in yast2-smt: Remove cron job
    rescheduling (bsc#1097560)
    
    Added missing translation marks (bsc#1037811)
    
    Explicitly mention 'Organization Credentials' (fate#321759)
    
    Rearrange the SMT set-up dialog (bsc#977043)
    
    Make the Filter button default (bsc#1006984)
    
    Prevent exiting the repo selection dialog via hitting Enter in the
    repository filter (bsc#1006984)
    
    report when error occurs during repo mirroring (bsc#1006989)
    
    Use TextEntry-based filter for repos (fate#319777)
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1006984"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1006989"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037811"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1097560"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1097824"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1103809"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1103810"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1104076"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=977043"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12470/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12471/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12472/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20182898-2/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?94aa7a85"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Server 12-SP2-BCL:zypper in -t patch
    SUSE-SLE-SERVER-12-SP2-BCL-2018-2056=1"
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:res-signingkeys");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-support");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/10/04");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/10/18");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/10/22");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES12", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    if (cpu >!< "x86_64") audit(AUDIT_ARCH_NOT, "x86_64", cpu);
    
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES12" && (! preg(pattern:"^(2)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP2", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"res-signingkeys-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"smt-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"smt-debuginfo-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"smt-debugsource-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", cpu:"x86_64", reference:"smt-support-3.0.37-52.23.6")) flag++;
    
    
    if (flag)
    {
      set_kb_item(name:'www/0/SQLi', value:TRUE);
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "smt / yast2-smt");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-2898-1.NASL
    descriptionThis update for yast2-smt to 3.0.14 and smt to 3.0.37 fixes the following issues : These security issues were fixed in SMT : CVE-2018-12471: Xml External Entity processing in the RegistrationSharing modules allowed to read arbitrary file read (bsc#1103809). CVE-2018-12470: SQL injection in RegistrationSharing module allows remote attackers to run arbitrary SQL statements (bsc#1103810). CVE-2018-12472: Authentication bypass in sibling check facilitated further attacks on SMT (bsc#1104076). SUSE would like to thank Jake Miller for reporting these issues to us. These non-security issues were fixed in SMT: Fix cron jobs randomization (bsc#1097560) Fix duplicate migration paths (bsc#1097824) This non-security issue was fixed in yast2-smt: Remove cron job rescheduling (bsc#1097560) Added missing translation marks (bsc#1037811) Explicitly mention
    last seen2020-06-01
    modified2020-06-02
    plugin id117822
    published2018-09-28
    reporterThis script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/117822
    titleSUSE SLES12 Security Update : smt, yast2-smt (SUSE-SU-2018:2898-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:2898-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(117822);
      script_version("1.4");
      script_cvs_date("Date: 2019/09/10 13:51:49");
    
      script_cve_id("CVE-2018-12470", "CVE-2018-12471", "CVE-2018-12472");
    
      script_name(english:"SUSE SLES12 Security Update : smt, yast2-smt (SUSE-SU-2018:2898-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for yast2-smt to 3.0.14 and smt to 3.0.37 fixes the
    following issues :
    
    These security issues were fixed in SMT :
    
    CVE-2018-12471: Xml External Entity processing in the
    RegistrationSharing modules allowed to read arbitrary file read
    (bsc#1103809).
    
    CVE-2018-12470: SQL injection in RegistrationSharing module allows
    remote attackers to run arbitrary SQL statements (bsc#1103810).
    
    CVE-2018-12472: Authentication bypass in sibling check facilitated
    further attacks on SMT (bsc#1104076).
    
    SUSE would like to thank Jake Miller for reporting these issues to us.
    
    These non-security issues were fixed in SMT: Fix cron jobs
    randomization (bsc#1097560)
    
    Fix duplicate migration paths (bsc#1097824)
    
    This non-security issue was fixed in yast2-smt: Remove cron job
    rescheduling (bsc#1097560)
    
    Added missing translation marks (bsc#1037811)
    
    Explicitly mention 'Organization Credentials' (fate#321759)
    
    Rearrange the SMT set-up dialog (bsc#977043)
    
    Make the Filter button default (bsc#1006984)
    
    Prevent exiting the repo selection dialog via hitting Enter in the
    repository filter (bsc#1006984)
    
    report when error occurs during repo mirroring (bsc#1006989)
    
    Use TextEntry-based filter for repos (fate#319777)
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1006984"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1006989"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037811"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1097560"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1097824"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1103809"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1103810"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1104076"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=977043"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12470/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12471/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12472/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20182898-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?1aa1d17c"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE OpenStack Cloud 7:zypper in -t patch
    SUSE-OpenStack-Cloud-7-2018-2056=1
    
    SUSE Linux Enterprise Server for SAP 12-SP2:zypper in -t patch
    SUSE-SLE-SAP-12-SP2-2018-2056=1
    
    SUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch
    SUSE-SLE-SAP-12-SP1-2018-2056=1
    
    SUSE Linux Enterprise Server 12-SP3:zypper in -t patch
    SUSE-SLE-SERVER-12-SP3-2018-2056=1
    
    SUSE Linux Enterprise Server 12-SP2-LTSS:zypper in -t patch
    SUSE-SLE-SERVER-12-SP2-2018-2056=1
    
    SUSE Linux Enterprise Server 12-SP1-LTSS:zypper in -t patch
    SUSE-SLE-SERVER-12-SP1-2018-2056=1
    
    SUSE Linux Enterprise Module for Public Cloud 12:zypper in -t patch
    SUSE-SLE-Module-Public-Cloud-12-2018-2056=1
    
    SUSE Enterprise Storage 4:zypper in -t patch
    SUSE-Storage-4-2018-2056=1"
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:res-signingkeys");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-support");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/10/04");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/09/27");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/09/28");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES12", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES12" && (! preg(pattern:"^(1|2|3)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP1/2/3", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES12", sp:"1", reference:"res-signingkeys-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"1", reference:"smt-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"1", reference:"smt-debuginfo-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"1", reference:"smt-debugsource-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"1", reference:"smt-support-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"res-signingkeys-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"smt-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"smt-debuginfo-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"smt-debugsource-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"smt-support-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"res-signingkeys-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"smt-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"smt-debuginfo-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"smt-debugsource-3.0.37-52.23.6")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"smt-support-3.0.37-52.23.6")) flag++;
    
    
    if (flag)
    {
      set_kb_item(name:'www/0/SQLi', value:TRUE);
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "smt / yast2-smt");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-2899-1.NASL
    descriptionThis update for smt to 2.0.34 fixes the following issues : These security issues were fixed : CVE-2018-12471: Xml External Entity processing in the RegistrationSharing modules allowed to read arbitrary file read (bsc#1103809) CVE-2018-12470: SQL injection in RegistrationSharing module allows remote attackers to run arbitary SQL statements (bsc#1103810) CVE-2018-12472: Authentication bypass in sibling check facilitated further attacks on SMT (bsc#1104076) SUSE would like to thank Jake Miller for reporting these issues to us. The update package also includes non-security fixes. See advisory for details. Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
    last seen2020-06-01
    modified2020-06-02
    plugin id117899
    published2018-10-03
    reporterThis script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/117899
    titleSUSE SLES11 Security Update : smt (SUSE-SU-2018:2899-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:2899-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(117899);
      script_version("1.4");
      script_cvs_date("Date: 2019/09/10 13:51:49");
    
      script_cve_id("CVE-2018-12470", "CVE-2018-12471", "CVE-2018-12472");
    
      script_name(english:"SUSE SLES11 Security Update : smt (SUSE-SU-2018:2899-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "This update for smt to 2.0.34 fixes the following issues :
    
    These security issues were fixed :
    
    CVE-2018-12471: Xml External Entity processing in the
    RegistrationSharing modules allowed to read arbitrary file read
    (bsc#1103809)
    
    CVE-2018-12470: SQL injection in RegistrationSharing module allows
    remote attackers to run arbitary SQL statements (bsc#1103810)
    
    CVE-2018-12472: Authentication bypass in sibling check facilitated
    further attacks on SMT (bsc#1104076)
    
    SUSE would like to thank Jake Miller for reporting these issues to us.
    
    The update package also includes non-security fixes. See advisory for
    details.
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1072921"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1074608"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1103809"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1103810"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1104076"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12470/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12471/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2018-12472/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20182899-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?9c6e6ae6"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use the SUSE recommended
    installation methods like YaST online_update or 'zypper patch'.
    
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Server 11-SP3:zypper in -t patch
    slesmtsp3-smt-13798=1"
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:res-signingkeys");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:smt-support");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:11");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2018/10/04");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/09/27");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/10/03");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLES11)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES11", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES11" && (! preg(pattern:"^(3)$", string:sp))) audit(AUDIT_OS_NOT, "SLES11 SP3", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES11", sp:"3", reference:"res-signingkeys-2.0.34-50.8.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"3", reference:"smt-2.0.34-50.8.1")) flag++;
    if (rpm_check(release:"SLES11", sp:"3", reference:"smt-support-2.0.34-50.8.1")) flag++;
    
    
    if (flag)
    {
      set_kb_item(name:'www/0/SQLi', value:TRUE);
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "smt");
    }