Vulnerabilities > CVE-2017-13757 - Out-of-bounds Read vulnerability in GNU Binutils 2.29

047910
CVSS 5.5 - MEDIUM
Attack vector
LOCAL
Attack complexity
LOW
Privileges required
NONE
Confidentiality impact
NONE
Integrity impact
NONE
Availability impact
HIGH
local
low complexity
gnu
CWE-125
nessus

Summary

The Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.29, does not validate the PLT section size, which allows remote attackers to cause a denial of service (heap-based buffer over-read and application crash) via a crafted ELF file, related to elf_i386_get_synthetic_symtab in elf32-i386.c and elf_x86_64_get_synthetic_symtab in elf64-x86-64.c.

Vulnerable Configurations

Part Description Count
Application
Gnu
1

Common Weakness Enumeration (CWE)

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Overread Buffers
    An adversary attacks a target by providing input that causes an application to read beyond the boundary of a defined buffer. This typically occurs when a value influencing where to start or stop reading is set to reflect positions outside of the valid memory location of the buffer. This type of attack may result in exposure of sensitive information, a system crash, or arbitrary code execution.

Nessus

  • NASL familySuSE Local Security Checks
    NASL idOPENSUSE-2017-1330.NASL
    descriptionGNU binutil was updated to the 2.29.1 release, bringing various new features, fixing a lot of bugs and security issues. Following security issues are being addressed by this release : - 18750 bsc#1030296 CVE-2014-9939 - 20891 bsc#1030585 CVE-2017-7225 - 20892 bsc#1030588 CVE-2017-7224 - 20898 bsc#1030589 CVE-2017-7223 - 20905 bsc#1030584 CVE-2017-7226 - 20908 bsc#1031644 CVE-2017-7299 - 20909 bsc#1031656 CVE-2017-7300 - 20921 bsc#1031595 CVE-2017-7302 - 20922 bsc#1031593 CVE-2017-7303 - 20924 bsc#1031638 CVE-2017-7301 - 20931 bsc#1031590 CVE-2017-7304 - 21135 bsc#1030298 CVE-2017-7209 - 21137 bsc#1029909 CVE-2017-6965 - 21139 bsc#1029908 CVE-2017-6966 - 21156 bsc#1029907 CVE-2017-6969 - 21157 bsc#1030297 CVE-2017-7210 - 21409 bsc#1037052 CVE-2017-8392 - 21412 bsc#1037057 CVE-2017-8393 - 21414 bsc#1037061 CVE-2017-8394 - 21432 bsc#1037066 CVE-2017-8396 - 21440 bsc#1037273 CVE-2017-8421 - 21580 bsc#1044891 CVE-2017-9746 - 21581 bsc#1044897 CVE-2017-9747 - 21582 bsc#1044901 CVE-2017-9748 - 21587 bsc#1044909 CVE-2017-9750 - 21594 bsc#1044925 CVE-2017-9755 - 21595 bsc#1044927 CVE-2017-9756 - 21787 bsc#1052518 CVE-2017-12448 - 21813 bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450, bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450 - 21933 bsc#1053347 CVE-2017-12799 - 21990 bsc#1058480 CVE-2017-14333 - 22018 bsc#1056312 CVE-2017-13757 - 22047 bsc#1057144 CVE-2017-14129 - 22058 bsc#1057149 CVE-2017-14130 - 22059 bsc#1057139 CVE-2017-14128 - 22113 bsc#1059050 CVE-2017-14529 - 22148 bsc#1060599 CVE-2017-14745 - 22163 bsc#1061241 CVE-2017-14974 - 22170 bsc#1060621 CVE-2017-14729 Update to binutils 2.29. [fate#321454, fate#321494, fate#323293] : - The MIPS port now supports microMIPS eXtended Physical Addressing (XPA) instructions for assembly and disassembly. - The MIPS port now supports the microMIPS Release 5 ISA for assembly and disassembly. - The MIPS port now supports the Imagination interAptiv MR2 processor, which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple of implementation-specific regular MIPS and MIPS16e2 ASE instructions. - The SPARC port now supports the SPARC M8 processor, which implements the Oracle SPARC Architecture 2017. - The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly. - Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. - Add support for the wasm32 ELF conversion of the WebAssembly file format. - Add --inlines option to objdump, which extends the --line-numbers option so that inlined functions will display their nesting information. - Add --merge-notes options to objcopy to reduce the size of notes in a binary file by merging and deleting redundant notes. - Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. - GAS specific : - Add support for ELF SHF_GNU_MBIND. - Add support for the WebAssembly file format and wasm32 ELF conversion. - PowerPC gas now checks that the correct register class is used in instructions. For instance,
    last seen2020-06-05
    modified2017-12-14
    plugin id105225
    published2017-12-14
    reporterThis script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/105225
    titleopenSUSE Security Update : binutils (openSUSE-2017-1330)
    code
    #%NASL_MIN_LEVEL 80502
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from openSUSE Security Update openSUSE-2017-1330.
    #
    # The text description of this plugin is (C) SUSE LLC.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(105225);
      script_version("3.5");
      script_set_attribute(attribute:"plugin_modification_date", value:"2020/06/04");
    
      script_cve_id("CVE-2014-9939", "CVE-2017-12448", "CVE-2017-12450", "CVE-2017-12452", "CVE-2017-12453", "CVE-2017-12454", "CVE-2017-12456", "CVE-2017-12799", "CVE-2017-13757", "CVE-2017-14128", "CVE-2017-14129", "CVE-2017-14130", "CVE-2017-14333", "CVE-2017-14529", "CVE-2017-14729", "CVE-2017-14745", "CVE-2017-14974", "CVE-2017-6965", "CVE-2017-6966", "CVE-2017-6969", "CVE-2017-7209", "CVE-2017-7210", "CVE-2017-7223", "CVE-2017-7224", "CVE-2017-7225", "CVE-2017-7226", "CVE-2017-7227", "CVE-2017-7299", "CVE-2017-7300", "CVE-2017-7301", "CVE-2017-7302", "CVE-2017-7303", "CVE-2017-7304", "CVE-2017-7614", "CVE-2017-8392", "CVE-2017-8393", "CVE-2017-8394", "CVE-2017-8395", "CVE-2017-8396", "CVE-2017-8397", "CVE-2017-8398", "CVE-2017-8421", "CVE-2017-9038", "CVE-2017-9039", "CVE-2017-9040", "CVE-2017-9041", "CVE-2017-9042", "CVE-2017-9043", "CVE-2017-9044", "CVE-2017-9746", "CVE-2017-9747", "CVE-2017-9748", "CVE-2017-9750", "CVE-2017-9755", "CVE-2017-9756", "CVE-2017-9954", "CVE-2017-9955");
    
      script_name(english:"openSUSE Security Update : binutils (openSUSE-2017-1330)");
      script_summary(english:"Check for the openSUSE-2017-1330 patch");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote openSUSE host is missing a security update."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "GNU binutil was updated to the 2.29.1 release, bringing various new
    features, fixing a lot of bugs and security issues.
    
    Following security issues are being addressed by this release :
    
      - 18750 bsc#1030296 CVE-2014-9939
    
      - 20891 bsc#1030585 CVE-2017-7225
    
      - 20892 bsc#1030588 CVE-2017-7224
    
      - 20898 bsc#1030589 CVE-2017-7223
    
      - 20905 bsc#1030584 CVE-2017-7226
    
      - 20908 bsc#1031644 CVE-2017-7299
    
      - 20909 bsc#1031656 CVE-2017-7300
    
      - 20921 bsc#1031595 CVE-2017-7302
    
      - 20922 bsc#1031593 CVE-2017-7303
    
      - 20924 bsc#1031638 CVE-2017-7301
    
      - 20931 bsc#1031590 CVE-2017-7304
    
      - 21135 bsc#1030298 CVE-2017-7209 
    
      - 21137 bsc#1029909 CVE-2017-6965
    
      - 21139 bsc#1029908 CVE-2017-6966
    
      - 21156 bsc#1029907 CVE-2017-6969
    
      - 21157 bsc#1030297 CVE-2017-7210
    
      - 21409 bsc#1037052 CVE-2017-8392
    
      - 21412 bsc#1037057 CVE-2017-8393
    
      - 21414 bsc#1037061 CVE-2017-8394
    
      - 21432 bsc#1037066 CVE-2017-8396
    
      - 21440 bsc#1037273 CVE-2017-8421
    
      - 21580 bsc#1044891 CVE-2017-9746
    
      - 21581 bsc#1044897 CVE-2017-9747
    
      - 21582 bsc#1044901 CVE-2017-9748
    
      - 21587 bsc#1044909 CVE-2017-9750
    
      - 21594 bsc#1044925 CVE-2017-9755
    
      - 21595 bsc#1044927 CVE-2017-9756
    
      - 21787 bsc#1052518 CVE-2017-12448
    
      - 21813 bsc#1052503, CVE-2017-12456, bsc#1052507,
        CVE-2017-12454, bsc#1052509, CVE-2017-12453,
        bsc#1052511, CVE-2017-12452, bsc#1052514,
        CVE-2017-12450, bsc#1052503, CVE-2017-12456,
        bsc#1052507, CVE-2017-12454, bsc#1052509,
        CVE-2017-12453, bsc#1052511, CVE-2017-12452,
        bsc#1052514, CVE-2017-12450
    
      - 21933 bsc#1053347 CVE-2017-12799
    
      - 21990 bsc#1058480 CVE-2017-14333
    
      - 22018 bsc#1056312 CVE-2017-13757
    
      - 22047 bsc#1057144 CVE-2017-14129
    
      - 22058 bsc#1057149 CVE-2017-14130
    
      - 22059 bsc#1057139 CVE-2017-14128
    
      - 22113 bsc#1059050 CVE-2017-14529
    
      - 22148 bsc#1060599 CVE-2017-14745
    
      - 22163 bsc#1061241 CVE-2017-14974
    
      - 22170 bsc#1060621 CVE-2017-14729
    
    Update to binutils 2.29. [fate#321454, fate#321494, fate#323293] :
    
      - The MIPS port now supports microMIPS eXtended Physical
        Addressing (XPA) instructions for assembly and
        disassembly.
    
      - The MIPS port now supports the microMIPS Release 5 ISA
        for assembly and disassembly.
    
      - The MIPS port now supports the Imagination interAptiv
        MR2 processor, which implements the MIPS32r3 ISA, the
        MIPS16e2 ASE as well as a couple of
        implementation-specific regular MIPS and MIPS16e2 ASE
        instructions.
    
      - The SPARC port now supports the SPARC M8 processor,
        which implements the Oracle SPARC Architecture 2017.
    
      - The MIPS port now supports the MIPS16e2 ASE for assembly
        and disassembly.
    
      - Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
    
      - Add support for the wasm32 ELF conversion of the
        WebAssembly file format.
    
      - Add --inlines option to objdump, which extends the
        --line-numbers option so that inlined functions will
        display their nesting information.
    
      - Add --merge-notes options to objcopy to reduce the size
        of notes in a binary file by merging and deleting
        redundant notes.
    
      - Add support for locating separate debug info files using
        the build-id method, where the separate file has a name
        based upon the build-id of the original file.
    
      - GAS specific :
    
      - Add support for ELF SHF_GNU_MBIND.
    
      - Add support for the WebAssembly file format and wasm32
        ELF conversion.
    
      - PowerPC gas now checks that the correct register class
        is used in instructions. For instance, 'addi
        %f4,%cr3,%r31' warns three times that the registers are
        invalid.
    
      - Add support for the Texas Instruments PRU processor.
    
      - Support for the ARMv8-R architecture and Cortex-R52
        processor has been added to the ARM port.
    
      - GNU ld specific :
    
      - Support for -z shstk in the x86 ELF linker to generate
        GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program
        properties.
    
      - Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF
        GNU program properties in the x86 ELF linker.
    
      - Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF
        GNU program properties in the x86 ELF linker.
    
      - Support for -z ibtplt in the x86 ELF linker to generate
        IBT-enabled PLT.
    
      - Support for -z ibt in the x86 ELF linker to generate
        IBT-enabled PLT as well as
        GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
        properties.
    
      - Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
    
      - Add support for ELF GNU program properties.
    
      - Add support for the Texas Instruments PRU processor.
    
      - When configuring for arc*-*-linux* targets the default
        linker emulation will change if --with-cpu=nps400 is
        used at configure time.
    
      - Improve assignment of LMAs to orphan sections in some
        edge cases where a mixture of both AT>LMA_REGION and
        AT(LMA) are used.
    
      - Orphan sections placed after an empty section that has
        an AT(LMA) will now take an load memory address starting
        from LMA.
    
      - Section groups can now be resolved (the group deleted
        and the group members placed like normal sections) at
        partial link time either using the new linker option
        --force-group-allocation or by placing
        FORCE_GROUP_ALLOCATION into the linker script.
    
      - Add riscv64 target, tested with gcc7 and downstream
        newlib 2.4.0
    
      - Prepare riscv32 target (gh#riscv/riscv-newlib#8)
    
      - Make compressed debug section handling explicit, disable
        for old products and enable for gas on all architectures
        otherwise. [bsc#1029995]
    
      - Remove empty rpath component removal optimization from
        to workaround CMake rpath handling. [bsc#1025282]
    
        Minor security bugs fixed: PR 21147, PR 21148, PR 21149,
        PR 21150, PR 21151, PR 21155, PR 21158, PR 21159
    
      - Update to binutils 2.28.
    
      - Add support for locating separate debug info files using
        the build-id method, where the separate file has a name
        based upon the build-id of the original file.
    
      - This version of binutils fixes a problem with PowerPC
        VLE 16A and 16D relocations which were functionally
        swapped, for example, R_PPC_VLE_HA16A performed like
        R_PPC_VLE_HA16D while R_PPC_VLE_HA16D performed like
        R_PPC_VLE_HA16A. This could have been fixed by
        renumbering relocations, which would keep object files
        created by an older version of gas compatible with a
        newer ld. However, that would require an ABI update,
        affecting other assemblers and linkers that create and
        process the relocations correctly. It is recommended
        that all VLE object files be recompiled, but ld can
        modify the relocations if --vle-reloc-fixup is passed to
        ld. If the new ld command line option is not used, ld
        will ld warn on finding relocations inconsistent with
        the instructions being relocated.
    
      - The nm program has a new command line option
        (--with-version-strings) which will display a symbol's
        version information, if any, after the symbol's name.
    
      - The ARC port of objdump now accepts a -M option to
        specify the extra instruction class(es) that should be
        disassembled.
    
      - The --remove-section option for objcopy and strip now
        accepts section patterns starting with an exclamation
        point to indicate a non-matching section. A non-matching
        section is removed from the set of sections matched by
        an earlier --remove-section pattern.
    
      - The --only-section option for objcopy now accepts
        section patterns starting with an exclamation point to
        indicate a non-matching section. A non-matching section
        is removed from the set of sections matched by an
        earlier --only-section pattern.
    
      - New --remove-relocations=SECTIONPATTERN option for
        objcopy and strip. This option can be used to remove
        sections containing relocations. The SECTIONPATTERN is
        the section to which the relocations apply, not the
        relocation section itself.
    
      - GAS specific :
    
      - Add support for the RISC-V architecture.
    
      - Add support for the ARM Cortex-M23 and Cortex-M33
        processors.
    
      - GNU ld specific :
    
      - The EXCLUDE_FILE linker script construct can now be
        applied outside of the section list in order for the
        exclusions to apply over all input sections in the list.
    
      - Add support for the RISC-V architecture.
    
      - The command line option --no-eh-frame-hdr can now be
        used in ELF based linkers to disable the automatic
        generation of .eh_frame_hdr sections.
    
      - Add --in-implib=<infile> to the ARM linker to enable
        specifying a set of Secure Gateway veneers that must
        exist in the output import library specified by
        --out-implib=<outfile> and the address they must have.
        As such, --in-implib is only supported in combination
        with --cmse-implib.
    
      - Extended the --out-implib=<file> option, previously
        restricted to x86 PE targets, to any ELF based target.
        This allows the generation of an import library for an
        ELF executable, which can then be used by another
        application to link against the executable.
    
      - GOLD specific :
    
      - Add -z bndplt option (x86-64 only) to support Intel MPX.
    
      - Add --orphan-handling option.
    
      - Add --stub-group-multi option (PowerPC only).
    
      - Add --target1-rel, --target1-abs, --target2 options (Arm
        only).
    
      - Add -z stack-size option.
    
      - Add --be8 option (Arm only).
    
      - Add HIDDEN support in linker scripts.
    
      - Add SORT_BY_INIT_PRIORITY support in linker scripts.
    
      - Other fixes :
    
      - Fix section alignment on .gnu_debuglink. [bso#21193]
    
      - Add s390x to gold_archs.
    
      - Fix alignment frags for aarch64 (bsc#1003846)
    
      - Call ldconfig for libbfd
    
      - Fix an assembler problem with clang on ARM.
    
      - Restore monotonically increasing section offsets.
    
      - Update to binutils 2.27.
    
      - Add a configure option, --enable-64-bit-archive, to
        force use of a 64-bit format when creating an archive
        symbol index.
    
      - Add --elf-stt-common= option to objcopy for ELF targets
        to control whether to convert common symbols to the
        STT_COMMON type.
    
      - GAS specific :
    
      - Default to --enable-compressed-debug-sections=gas for
        Linux/x86 targets.
    
      - Add --no-pad-sections to stop the assembler from padding
        the end of output sections up to their alignment
        boundary.
    
      - Support for the ARMv8-M architecture has been added to
        the ARM port. Support for the ARMv8-M Security and DSP
        Extensions has also been added to the ARM port.
    
      - ARC backend accepts .extInstruction, .extCondCode,
        .extAuxRegister, and .extCoreRegister pseudo-ops that
        allow an user to define custom instructions, conditional
        codes, auxiliary and core registers.
    
      - Add a configure option --enable-elf-stt-common to decide
        whether ELF assembler should generate common symbols
        with the STT_COMMON type by default. Default to no.
    
      - New command line option --elf-stt-common= for ELF
        targets to control whether to generate common symbols
        with the STT_COMMON type.
    
      - Add ability to set section flags and types via numeric
        values for ELF based targets.
    
      - Add a configure option --enable-x86-relax-relocations to
        decide whether x86 assembler should generate relax
        relocations by default. Default to yes, except for x86
        Solaris targets older than Solaris 12.
    
      - New command line option -mrelax-relocations= for x86
        target to control whether to generate relax relocations.
    
      - New command line option -mfence-as-lock-add=yes for x86
        target to encode lfence, mfence and sfence as 'lock addl
        $0x0, (%[re]sp)'.
    
      - Add assembly-time relaxation option for ARC cpus.
    
      - Add --with-cpu=TYPE configure option for ARC gas. This
        allows the default cpu type to be adjusted at configure
        time.
    
      - GOLD specific :
    
      - Add a configure option --enable-relro to decide whether
        -z relro should be enabled by default. Default to yes.
    
      - Add support for s390, MIPS, AArch64, and TILE-Gx
        architectures.
    
      - Add support for STT_GNU_IFUNC symbols.
    
      - Add support for incremental linking (--incremental).
    
      - GNU ld specific :
    
      - Add a configure option --enable-relro to decide whether
        -z relro should be enabled in ELF linker by default.
        Default to yes for all Linux targets except FRV, HPPA,
        IA64 and MIPS.
    
      - Support for -z noreloc-overflow in the x86-64 ELF linker
        to disable relocation overflow check.
    
      - Add -z common/-z nocommon options for ELF targets to
        control whether to convert common symbols to the
        STT_COMMON type during a relocatable link.
    
      - Support for -z nodynamic-undefined-weak in the x86 ELF
        linker, which avoids dynamic relocations against
        undefined weak symbols in executable.
    
      - The NOCROSSREFSTO command was added to the linker script
        language.
    
      - Add --no-apply-dynamic-relocs to the AArch64 linker to
        do not apply link-time values for dynamic relocations.
    
    This update was imported from the SUSE:SLE-12:Update update project."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1003846"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1025282"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1029907"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1029908"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1029909"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1029995"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030296"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030297"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030298"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030583"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030584"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030585"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030588"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1030589"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1031590"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1031593"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1031595"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1031638"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1031644"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1031656"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1033122"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037052"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037057"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037061"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037062"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037066"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037070"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037072"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1037273"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038874"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038875"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038876"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038877"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038878"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038880"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1038881"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1044891"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1044897"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1044901"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1044909"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1044925"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1044927"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1046094"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052061"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052496"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052503"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052507"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052509"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052511"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052514"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1052518"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1053347"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1056312"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1056437"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1057139"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1057144"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1057149"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1058480"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1059050"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1060599"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1060621"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=1061241"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=437293"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=445037"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=546106"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=561142"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=578249"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=590820"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=691290"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=698346"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=713504"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=776968"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=863764"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=938658"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.opensuse.org/show_bug.cgi?id=970239"
      );
      # https://features.opensuse.org/306880
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/311376
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/311554
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/311972
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/312149
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/321454
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/321494
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/323293
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      # https://features.opensuse.org/323972
      script_set_attribute(
        attribute:"see_also",
        value:"https://features.opensuse.org/"
      );
      script_set_attribute(
        attribute:"solution", 
        value:"Update the affected binutils packages."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"true");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-devel");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-devel-32bit");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-gold");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:binutils-gold-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-aarch64-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-aarch64-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-aarch64-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-arm-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-arm-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-arm-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-avr-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-avr-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-avr-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa64-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa64-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-hppa64-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-i386-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-i386-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-i386-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ia64-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ia64-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ia64-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-m68k-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-m68k-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-m68k-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-mips-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-mips-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-mips-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64le-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64le-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-ppc64le-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390x-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390x-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-s390x-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc64-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc64-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-sparc64-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-spu-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-spu-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-spu-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-x86_64-binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-x86_64-binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:opensuse:cross-x86_64-binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:42.2");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:opensuse:42.3");
    
      script_set_attribute(attribute:"patch_publication_date", value:"2017/12/02");
      script_set_attribute(attribute:"plugin_publication_date", value:"2017/12/14");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2017-2020 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/SuSE/release", "Host/SuSE/rpm-list", "Host/cpu");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release =~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "openSUSE");
    if (release !~ "^(SUSE42\.2|SUSE42\.3)$") audit(AUDIT_OS_RELEASE_NOT, "openSUSE", "42.2 / 42.3", release);
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    ourarch = get_kb_item("Host/cpu");
    if (!ourarch) audit(AUDIT_UNKNOWN_ARCH);
    if (ourarch !~ "^(i586|i686|x86_64)$") audit(AUDIT_ARCH_NOT, "i586 / i686 / x86_64", ourarch);
    
    flag = 0;
    
    if ( rpm_check(release:"SUSE42.2", reference:"binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"binutils-devel-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"binutils-gold-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"binutils-gold-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-aarch64-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-aarch64-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-aarch64-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-arm-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-arm-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-arm-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-avr-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-avr-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-avr-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-hppa-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-hppa-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-hppa-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-hppa64-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-hppa64-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-hppa64-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ia64-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ia64-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ia64-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-m68k-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-m68k-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-m68k-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-mips-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-mips-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-mips-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc64-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc64-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc64-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc64le-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc64le-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-ppc64le-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-s390-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-s390-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-s390-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-s390x-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-s390x-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-s390x-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-sparc-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-sparc-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-sparc-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-sparc64-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-sparc64-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-sparc64-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-spu-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-spu-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-spu-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-x86_64-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-x86_64-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", reference:"cross-x86_64-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", cpu:"x86_64", reference:"binutils-devel-32bit-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", cpu:"x86_64", reference:"cross-i386-binutils-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", cpu:"x86_64", reference:"cross-i386-binutils-debuginfo-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.2", cpu:"x86_64", reference:"cross-i386-binutils-debugsource-2.29.1-9.6.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"binutils-devel-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"binutils-gold-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"binutils-gold-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-aarch64-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-aarch64-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-aarch64-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-arm-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-arm-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-arm-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-avr-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-avr-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-avr-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-hppa-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-hppa-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-hppa-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-hppa64-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-hppa64-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-hppa64-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ia64-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ia64-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ia64-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-m68k-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-m68k-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-m68k-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-mips-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-mips-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-mips-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc64-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc64-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc64-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc64le-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc64le-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-ppc64le-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-s390-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-s390-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-s390-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-s390x-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-s390x-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-s390x-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-sparc-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-sparc-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-sparc-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-sparc64-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-sparc64-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-sparc64-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-spu-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-spu-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-spu-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-x86_64-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-x86_64-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", reference:"cross-x86_64-binutils-debugsource-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"binutils-devel-32bit-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"cross-i386-binutils-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"cross-i386-binutils-debuginfo-2.29.1-13.1") ) flag++;
    if ( rpm_check(release:"SUSE42.3", cpu:"x86_64", reference:"cross-i386-binutils-debugsource-2.29.1-13.1") ) flag++;
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils / binutils-debuginfo / binutils-debugsource / etc");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2017-3170-1.NASL
    descriptionGNU binutil was updated to the 2.29.1 release, bringing various new features, fixing a lot of bugs and security issues. Following security issues are being addressed by this release : - 18750 bsc#1030296 CVE-2014-9939 - 20891 bsc#1030585 CVE-2017-7225 - 20892 bsc#1030588 CVE-2017-7224 - 20898 bsc#1030589 CVE-2017-7223 - 20905 bsc#1030584 CVE-2017-7226 - 20908 bsc#1031644 CVE-2017-7299 - 20909 bsc#1031656 CVE-2017-7300 - 20921 bsc#1031595 CVE-2017-7302 - 20922 bsc#1031593 CVE-2017-7303 - 20924 bsc#1031638 CVE-2017-7301 - 20931 bsc#1031590 CVE-2017-7304 - 21135 bsc#1030298 CVE-2017-7209 - 21137 bsc#1029909 CVE-2017-6965 - 21139 bsc#1029908 CVE-2017-6966 - 21156 bsc#1029907 CVE-2017-6969 - 21157 bsc#1030297 CVE-2017-7210 - 21409 bsc#1037052 CVE-2017-8392 - 21412 bsc#1037057 CVE-2017-8393 - 21414 bsc#1037061 CVE-2017-8394 - 21432 bsc#1037066 CVE-2017-8396 - 21440 bsc#1037273 CVE-2017-8421 - 21580 bsc#1044891 CVE-2017-9746 - 21581 bsc#1044897 CVE-2017-9747 - 21582 bsc#1044901 CVE-2017-9748 - 21587 bsc#1044909 CVE-2017-9750 - 21594 bsc#1044925 CVE-2017-9755 - 21595 bsc#1044927 CVE-2017-9756 - 21787 bsc#1052518 CVE-2017-12448 - 21813 bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450, bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450 - 21933 bsc#1053347 CVE-2017-12799 - 21990 bsc#1058480 CVE-2017-14333 - 22018 bsc#1056312 CVE-2017-13757 - 22047 bsc#1057144 CVE-2017-14129 - 22058 bsc#1057149 CVE-2017-14130 - 22059 bsc#1057139 CVE-2017-14128 - 22113 bsc#1059050 CVE-2017-14529 - 22148 bsc#1060599 CVE-2017-14745 - 22163 bsc#1061241 CVE-2017-14974 - 22170 bsc#1060621 CVE-2017-14729 Update to binutils 2.29. [fate#321454, fate#321494, fate#323293] : - The MIPS port now supports microMIPS eXtended Physical Addressing (XPA) instructions for assembly and disassembly. - The MIPS port now supports the microMIPS Release 5 ISA for assembly and disassembly. - The MIPS port now supports the Imagination interAptiv MR2 processor, which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple of implementation-specific regular MIPS and MIPS16e2 ASE instructions. - The SPARC port now supports the SPARC M8 processor, which implements the Oracle SPARC Architecture 2017. - The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly. - Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. - Add support for the wasm32 ELF conversion of the WebAssembly file format. - Add --inlines option to objdump, which extends the --line-numbers option so that inlined functions will display their nesting information. - Add --merge-notes options to objcopy to reduce the size of notes in a binary file by merging and deleting redundant notes. - Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. - GAS specific : - Add support for ELF SHF_GNU_MBIND. - Add support for the WebAssembly file format and wasm32 ELF conversion. - PowerPC gas now checks that the correct register class is used in instructions. For instance,
    last seen2020-06-01
    modified2020-06-02
    plugin id104968
    published2017-12-01
    reporterThis script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/104968
    titleSUSE SLED12 / SLES12 Security Update : binutils (SUSE-SU-2017:3170-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2017:3170-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(104968);
      script_version("3.6");
      script_cvs_date("Date: 2019/09/11 11:22:16");
    
      script_cve_id("CVE-2014-9939", "CVE-2017-12448", "CVE-2017-12450", "CVE-2017-12452", "CVE-2017-12453", "CVE-2017-12454", "CVE-2017-12456", "CVE-2017-12799", "CVE-2017-13757", "CVE-2017-14128", "CVE-2017-14129", "CVE-2017-14130", "CVE-2017-14333", "CVE-2017-14529", "CVE-2017-14729", "CVE-2017-14745", "CVE-2017-14974", "CVE-2017-6965", "CVE-2017-6966", "CVE-2017-6969", "CVE-2017-7209", "CVE-2017-7210", "CVE-2017-7223", "CVE-2017-7224", "CVE-2017-7225", "CVE-2017-7226", "CVE-2017-7227", "CVE-2017-7299", "CVE-2017-7300", "CVE-2017-7301", "CVE-2017-7302", "CVE-2017-7303", "CVE-2017-7304", "CVE-2017-7614", "CVE-2017-8392", "CVE-2017-8393", "CVE-2017-8394", "CVE-2017-8395", "CVE-2017-8396", "CVE-2017-8397", "CVE-2017-8398", "CVE-2017-8421", "CVE-2017-9038", "CVE-2017-9039", "CVE-2017-9040", "CVE-2017-9041", "CVE-2017-9042", "CVE-2017-9043", "CVE-2017-9044", "CVE-2017-9746", "CVE-2017-9747", "CVE-2017-9748", "CVE-2017-9750", "CVE-2017-9755", "CVE-2017-9756", "CVE-2017-9954", "CVE-2017-9955");
    
      script_name(english:"SUSE SLED12 / SLES12 Security Update : binutils (SUSE-SU-2017:3170-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "GNU binutil was updated to the 2.29.1 release, bringing various new
    features, fixing a lot of bugs and security issues. Following security
    issues are being addressed by this release :
    
      - 18750 bsc#1030296 CVE-2014-9939
    
      - 20891 bsc#1030585 CVE-2017-7225
    
      - 20892 bsc#1030588 CVE-2017-7224
    
      - 20898 bsc#1030589 CVE-2017-7223
    
      - 20905 bsc#1030584 CVE-2017-7226
    
      - 20908 bsc#1031644 CVE-2017-7299
    
      - 20909 bsc#1031656 CVE-2017-7300
    
      - 20921 bsc#1031595 CVE-2017-7302
    
      - 20922 bsc#1031593 CVE-2017-7303
    
      - 20924 bsc#1031638 CVE-2017-7301
    
      - 20931 bsc#1031590 CVE-2017-7304
    
      - 21135 bsc#1030298 CVE-2017-7209
    
      - 21137 bsc#1029909 CVE-2017-6965
    
      - 21139 bsc#1029908 CVE-2017-6966
    
      - 21156 bsc#1029907 CVE-2017-6969
    
      - 21157 bsc#1030297 CVE-2017-7210
    
      - 21409 bsc#1037052 CVE-2017-8392
    
      - 21412 bsc#1037057 CVE-2017-8393
    
      - 21414 bsc#1037061 CVE-2017-8394
    
      - 21432 bsc#1037066 CVE-2017-8396
    
      - 21440 bsc#1037273 CVE-2017-8421
    
      - 21580 bsc#1044891 CVE-2017-9746
    
      - 21581 bsc#1044897 CVE-2017-9747
    
      - 21582 bsc#1044901 CVE-2017-9748
    
      - 21587 bsc#1044909 CVE-2017-9750
    
      - 21594 bsc#1044925 CVE-2017-9755
    
      - 21595 bsc#1044927 CVE-2017-9756
    
      - 21787 bsc#1052518 CVE-2017-12448
    
      - 21813 bsc#1052503, CVE-2017-12456, bsc#1052507,
        CVE-2017-12454, bsc#1052509, CVE-2017-12453,
        bsc#1052511, CVE-2017-12452, bsc#1052514,
        CVE-2017-12450, bsc#1052503, CVE-2017-12456,
        bsc#1052507, CVE-2017-12454, bsc#1052509,
        CVE-2017-12453, bsc#1052511, CVE-2017-12452,
        bsc#1052514, CVE-2017-12450
    
      - 21933 bsc#1053347 CVE-2017-12799
    
      - 21990 bsc#1058480 CVE-2017-14333
    
      - 22018 bsc#1056312 CVE-2017-13757
    
      - 22047 bsc#1057144 CVE-2017-14129
    
      - 22058 bsc#1057149 CVE-2017-14130
    
      - 22059 bsc#1057139 CVE-2017-14128
    
      - 22113 bsc#1059050 CVE-2017-14529
    
      - 22148 bsc#1060599 CVE-2017-14745
    
      - 22163 bsc#1061241 CVE-2017-14974
    
      - 22170 bsc#1060621 CVE-2017-14729 Update to binutils
        2.29. [fate#321454, fate#321494, fate#323293] :
    
      - The MIPS port now supports microMIPS eXtended Physical
        Addressing (XPA) instructions for assembly and
        disassembly.
    
      - The MIPS port now supports the microMIPS Release 5 ISA
        for assembly and disassembly.
    
      - The MIPS port now supports the Imagination interAptiv
        MR2 processor, which implements the MIPS32r3 ISA, the
        MIPS16e2 ASE as well as a couple of
        implementation-specific regular MIPS and MIPS16e2 ASE
        instructions.
    
      - The SPARC port now supports the SPARC M8 processor,
        which implements the Oracle SPARC Architecture 2017.
    
      - The MIPS port now supports the MIPS16e2 ASE for assembly
        and disassembly.
    
      - Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
    
      - Add support for the wasm32 ELF conversion of the
        WebAssembly file format.
    
      - Add --inlines option to objdump, which extends the
        --line-numbers option so that inlined functions will
        display their nesting information.
    
      - Add --merge-notes options to objcopy to reduce the size
        of notes in a binary file by merging and deleting
        redundant notes.
    
      - Add support for locating separate debug info files using
        the build-id method, where the separate file has a name
        based upon the build-id of the original file.
    
      - GAS specific :
    
      - Add support for ELF SHF_GNU_MBIND.
    
      - Add support for the WebAssembly file format and wasm32
        ELF conversion.
    
      - PowerPC gas now checks that the correct register class
        is used in instructions. For instance, 'addi
        %f4,%cr3,%r31' warns three times that the registers are
        invalid.
    
      - Add support for the Texas Instruments PRU processor.
    
      - Support for the ARMv8-R architecture and Cortex-R52
        processor has been added to the ARM port.
    
      - GNU ld specific :
    
      - Support for -z shstk in the x86 ELF linker to generate
        GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program
        properties.
    
      - Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF
        GNU program properties in the x86 ELF linker.
    
      - Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF
        GNU program properties in the x86 ELF linker.
    
      - Support for -z ibtplt in the x86 ELF linker to generate
        IBT-enabled PLT.
    
      - Support for -z ibt in the x86 ELF linker to generate
        IBT-enabled PLT as well as
        GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
        properties.
    
      - Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
    
      - Add support for ELF GNU program properties.
    
      - Add support for the Texas Instruments PRU processor.
    
      - When configuring for arc*-*-linux* targets the default
        linker emulation will change if --with-cpu=nps400 is
        used at configure time.
    
      - Improve assignment of LMAs to orphan sections in some
        edge cases where a mixture of both AT>LMA_REGION and
        AT(LMA) are used.
    
      - Orphan sections placed after an empty section that has
        an AT(LMA) will now take an load memory address starting
        from LMA.
    
      - Section groups can now be resolved (the group deleted
        and the group members placed like normal sections) at
        partial link time either using the new linker option
        --force-group-allocation or by placing
        FORCE_GROUP_ALLOCATION into the linker script.
    
      - Add riscv64 target, tested with gcc7 and downstream
        newlib 2.4.0
    
      - Prepare riscv32 target (gh#riscv/riscv-newlib#8)
    
      - Make compressed debug section handling explicit, disable
        for old products and enable for gas on all architectures
        otherwise. [bsc#1029995]
    
      - Remove empty rpath component removal optimization from
        to workaround CMake rpath handling. [bsc#1025282] Minor
        security bugs fixed: PR 21147, PR 21148, PR 21149, PR
        21150, PR 21151, PR 21155, PR 21158, PR 21159
    
      - Update to binutils 2.28.
    
      - Add support for locating separate debug info files using
        the build-id method, where the separate file has a name
        based upon the build-id of the original file.
    
      - This version of binutils fixes a problem with PowerPC
        VLE 16A and 16D relocations which were functionally
        swapped, for example, R_PPC_VLE_HA16A performed like
        R_PPC_VLE_HA16D while R_PPC_VLE_HA16D performed like
        R_PPC_VLE_HA16A. This could have been fixed by
        renumbering relocations, which would keep object files
        created by an older version of gas compatible with a
        newer ld. However, that would require an ABI update,
        affecting other assemblers and linkers that create and
        process the relocations correctly. It is recommended
        that all VLE object files be recompiled, but ld can
        modify the relocations if --vle-reloc-fixup is passed to
        ld. If the new ld command line option is not used, ld
        will ld warn on finding relocations inconsistent with
        the instructions being relocated.
    
      - The nm program has a new command line option
        (--with-version-strings) which will display a symbol's
        version information, if any, after the symbol's name.
    
      - The ARC port of objdump now accepts a -M option to
        specify the extra instruction class(es) that should be
        disassembled.
    
      - The --remove-section option for objcopy and strip now
        accepts section patterns starting with an exclamation
        point to indicate a non-matching section. A non-matching
        section is removed from the set of sections matched by
        an earlier --remove-section pattern.
    
      - The --only-section option for objcopy now accepts
        section patterns starting with an exclamation point to
        indicate a non-matching section. A non-matching section
        is removed from the set of sections matched by an
        earlier --only-section pattern.
    
      - New --remove-relocations=SECTIONPATTERN option for
        objcopy and strip. This option can be used to remove
        sections containing relocations. The SECTIONPATTERN is
        the section to which the relocations apply, not the
        relocation section itself.
    
      - GAS specific :
    
      - Add support for the RISC-V architecture.
    
      - Add support for the ARM Cortex-M23 and Cortex-M33
        processors.
    
      - GNU ld specific :
    
      - The EXCLUDE_FILE linker script construct can now be
        applied outside of the section list in order for the
        exclusions to apply over all input sections in the list.
    
      - Add support for the RISC-V architecture.
    
      - The command line option --no-eh-frame-hdr can now be
        used in ELF based linkers to disable the automatic
        generation of .eh_frame_hdr sections.
    
      - Add --in-implib=<infile> to the ARM linker to enable
        specifying a set of Secure Gateway veneers that must
        exist in the output import library specified by
        --out-implib=<outfile> and the address they must have.
        As such, --in-implib is only supported in combination
        with --cmse-implib.
    
      - Extended the --out-implib=<file> option, previously
        restricted to x86 PE targets, to any ELF based target.
        This allows the generation of an import library for an
        ELF executable, which can then be used by another
        application to link against the executable.
    
      - GOLD specific :
    
      - Add -z bndplt option (x86-64 only) to support Intel MPX.
    
      - Add --orphan-handling option.
    
      - Add --stub-group-multi option (PowerPC only).
    
      - Add --target1-rel, --target1-abs, --target2 options (Arm
        only).
    
      - Add -z stack-size option.
    
      - Add --be8 option (Arm only).
    
      - Add HIDDEN support in linker scripts.
    
      - Add SORT_BY_INIT_PRIORITY support in linker scripts.
    
      - Other fixes :
    
      - Fix section alignment on .gnu_debuglink. [bso#21193]
    
      - Add s390x to gold_archs.
    
      - Fix alignment frags for aarch64 (bsc#1003846)
    
      - Call ldconfig for libbfd
    
      - Fix an assembler problem with clang on ARM.
    
      - Restore monotonically increasing section offsets.
    
      - Update to binutils 2.27.
    
      - Add a configure option, --enable-64-bit-archive, to
        force use of a 64-bit format when creating an archive
        symbol index.
    
      - Add --elf-stt-common= option to objcopy for ELF targets
        to control whether to convert common symbols to the
        STT_COMMON type.
    
      - GAS specific :
    
      - Default to --enable-compressed-debug-sections=gas for
        Linux/x86 targets.
    
      - Add --no-pad-sections to stop the assembler from padding
        the end of output sections up to their alignment
        boundary.
    
      - Support for the ARMv8-M architecture has been added to
        the ARM port. Support for the ARMv8-M Security and DSP
        Extensions has also been added to the ARM port.
    
      - ARC backend accepts .extInstruction, .extCondCode,
        .extAuxRegister, and .extCoreRegister pseudo-ops that
        allow an user to define custom instructions, conditional
        codes, auxiliary and core registers.
    
      - Add a configure option --enable-elf-stt-common to decide
        whether ELF assembler should generate common symbols
        with the STT_COMMON type by default. Default to no.
    
      - New command line option --elf-stt-common= for ELF
        targets to control whether to generate common symbols
        with the STT_COMMON type.
    
      - Add ability to set section flags and types via numeric
        values for ELF based targets.
    
      - Add a configure option --enable-x86-relax-relocations to
        decide whether x86 assembler should generate relax
        relocations by default. Default to yes, except for x86
        Solaris targets older than Solaris 12.
    
      - New command line option -mrelax-relocations= for x86
        target to control whether to generate relax relocations.
    
      - New command line option -mfence-as-lock-add=yes for x86
        target to encode lfence, mfence and sfence as 'lock addl
        $0x0, (%[re]sp)'.
    
      - Add assembly-time relaxation option for ARC cpus.
    
      - Add --with-cpu=TYPE configure option for ARC gas. This
        allows the default cpu type to be adjusted at configure
        time.
    
      - GOLD specific :
    
      - Add a configure option --enable-relro to decide whether
        -z relro should be enabled by default. Default to yes.
    
      - Add support for s390, MIPS, AArch64, and TILE-Gx
        architectures.
    
      - Add support for STT_GNU_IFUNC symbols.
    
      - Add support for incremental linking (--incremental).
    
      - GNU ld specific :
    
      - Add a configure option --enable-relro to decide whether
        -z relro should be enabled in ELF linker by default.
        Default to yes for all Linux targets except FRV, HPPA,
        IA64 and MIPS.
    
      - Support for -z noreloc-overflow in the x86-64 ELF linker
        to disable relocation overflow check.
    
      - Add -z common/-z nocommon options for ELF targets to
        control whether to convert common symbols to the
        STT_COMMON type during a relocatable link.
    
      - Support for -z nodynamic-undefined-weak in the x86 ELF
        linker, which avoids dynamic relocations against
        undefined weak symbols in executable.
    
      - The NOCROSSREFSTO command was added to the linker script
        language.
    
      - Add --no-apply-dynamic-relocs to the AArch64 linker to
        do not apply link-time values for dynamic
        relocations.</file></outfile></infile>
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1003846"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1025282"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029907"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029908"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029909"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029995"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030296"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030297"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030298"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030583"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030584"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030585"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030588"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030589"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1031590"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1031593"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1031595"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1031638"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1031644"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1031656"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1033122"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037052"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037057"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037061"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037062"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037066"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037070"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037072"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1037273"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038874"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038875"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038876"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038877"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038878"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038880"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1038881"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044891"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044897"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044901"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044909"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044925"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044927"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1046094"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052061"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052496"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052503"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052507"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052509"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052511"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052514"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052518"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1053347"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1056312"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1056437"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057139"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057144"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057149"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1058480"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1059050"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1060599"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1060621"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1061241"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=437293"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=445037"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=546106"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=561142"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=578249"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=590820"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=691290"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=698346"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=713504"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=776968"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=863764"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=938658"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=970239"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-9939/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12448/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12450/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12452/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12453/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12454/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12456/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12799/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-13757/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14128/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14129/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14130/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14333/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14529/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14729/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14745/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14974/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-6965/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-6966/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-6969/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7209/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7210/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7223/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7224/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7225/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7226/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7227/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7299/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7300/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7301/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7302/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7303/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7304/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-7614/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8392/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8393/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8394/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8395/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8396/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8397/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8398/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-8421/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9038/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9039/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9040/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9041/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9042/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9043/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9044/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9746/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9747/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9748/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9750/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9755/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9756/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9954/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-9955/"
      );
      # https://www.suse.com/support/update/announcement/2017/suse-su-20173170-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?3ef1d319"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use YaST online_update.
    Alternatively you can run the command listed for your product :
    
    SUSE Linux Enterprise Software Development Kit 12-SP3:zypper in -t
    patch SUSE-SLE-SDK-12-SP3-2017-1971=1
    
    SUSE Linux Enterprise Software Development Kit 12-SP2:zypper in -t
    patch SUSE-SLE-SDK-12-SP2-2017-1971=1
    
    SUSE Linux Enterprise Server for SAP 12-SP1:zypper in -t patch
    SUSE-SLE-SAP-12-SP1-2017-1971=1
    
    SUSE Linux Enterprise Server for Raspberry Pi 12-SP2:zypper in -t
    patch SUSE-SLE-RPI-12-SP2-2017-1971=1
    
    SUSE Linux Enterprise Server 12-SP3:zypper in -t patch
    SUSE-SLE-SERVER-12-SP3-2017-1971=1
    
    SUSE Linux Enterprise Server 12-SP2:zypper in -t patch
    SUSE-SLE-SERVER-12-SP2-2017-1971=1
    
    SUSE Linux Enterprise Desktop 12-SP3:zypper in -t patch
    SUSE-SLE-DESKTOP-12-SP3-2017-1971=1
    
    SUSE Linux Enterprise Desktop 12-SP2:zypper in -t patch
    SUSE-SLE-DESKTOP-12-SP2-2017-1971=1
    
    OpenStack Cloud Magnum Orchestration 7:zypper in -t patch
    SUSE-OpenStack-Cloud-Magnum-Orchestration-7-2017-1971=1
    
    To bring your system up-to-date, use 'zypper patch'."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"true");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debuginfo");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:binutils-debugsource");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2017/03/17");
      script_set_attribute(attribute:"patch_publication_date", value:"2017/11/30");
      script_set_attribute(attribute:"plugin_publication_date", value:"2017/12/01");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2017-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLED12|SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLED12 / SLES12", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    
    sp = get_kb_item("Host/SuSE/patchlevel");
    if (isnull(sp)) sp = "0";
    if (os_ver == "SLES12" && (! preg(pattern:"^(2|3)$", string:sp))) audit(AUDIT_OS_NOT, "SLES12 SP2/3", os_ver + " SP" + sp);
    if (os_ver == "SLED12" && (! preg(pattern:"^(2|3)$", string:sp))) audit(AUDIT_OS_NOT, "SLED12 SP2/3", os_ver + " SP" + sp);
    
    
    flag = 0;
    if (rpm_check(release:"SLES12", sp:"3", reference:"binutils-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"binutils-debuginfo-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLES12", sp:"3", reference:"binutils-debugsource-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-debuginfo-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLES12", sp:"2", reference:"binutils-debugsource-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"binutils-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"binutils-debuginfo-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLED12", sp:"3", cpu:"x86_64", reference:"binutils-debugsource-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"binutils-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"binutils-debuginfo-2.29.1-9.20.2")) flag++;
    if (rpm_check(release:"SLED12", sp:"2", cpu:"x86_64", reference:"binutils-debugsource-2.29.1-9.20.2")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "binutils");
    }
    
  • NASL familySuSE Local Security Checks
    NASL idSUSE_SU-2018-0053-1.NASL
    descriptionThe Docker images provided with SUSE CaaS Platform 2.0 have been updated to include the following updates: binutils : - Update to version 2.29 - 18750 bsc#1030296 CVE-2014-9939 - 20891 bsc#1030585 CVE-2017-7225 - 20892 bsc#1030588 CVE-2017-7224 - 20898 bsc#1030589 CVE-2017-7223 - 20905 bsc#1030584 CVE-2017-7226 - 20908 bsc#1031644 CVE-2017-7299 - 20909 bsc#1031656 CVE-2017-7300 - 20921 bsc#1031595 CVE-2017-7302 - 20922 bsc#1031593 CVE-2017-7303 - 20924 bsc#1031638 CVE-2017-7301 - 20931 bsc#1031590 CVE-2017-7304 - 21135 bsc#1030298 CVE-2017-7209 - 21137 bsc#1029909 CVE-2017-6965 - 21139 bsc#1029908 CVE-2017-6966 - 21156 bsc#1029907 CVE-2017-6969 - 21157 bsc#1030297 CVE-2017-7210 - 21409 bsc#1037052 CVE-2017-8392 - 21412 bsc#1037057 CVE-2017-8393 - 21414 bsc#1037061 CVE-2017-8394 - 21432 bsc#1037066 CVE-2017-8396 - 21440 bsc#1037273 CVE-2017-8421 - 21580 bsc#1044891 CVE-2017-9746 - 21581 bsc#1044897 CVE-2017-9747 - 21582 bsc#1044901 CVE-2017-9748 - 21587 bsc#1044909 CVE-2017-9750 - 21594 bsc#1044925 CVE-2017-9755 - 21595 bsc#1044927 CVE-2017-9756 - 21787 bsc#1052518 CVE-2017-12448 - 21813 bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450, bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514, CVE-2017-12450 - 21933 bsc#1053347 CVE-2017-12799 - 21990 bsc#1058480 CVE-2017-14333 - 22018 bsc#1056312 CVE-2017-13757 - 22047 bsc#1057144 CVE-2017-14129 - 22058 bsc#1057149 CVE-2017-14130 - 22059 bsc#1057139 CVE-2017-14128 - 22113 bsc#1059050 CVE-2017-14529 - 22148 bsc#1060599 CVE-2017-14745 - 22163 bsc#1061241 CVE-2017-14974 - 22170 bsc#1060621 CVE-2017-14729 - Make compressed debug section handling explicit, disable for old products and enable for gas on all architectures otherwise. [bsc#1029995] - Remove empty rpath component removal optimization from to workaround CMake rpath handling. [bsc#1025282] - Fix alignment frags for aarch64 (bsc#1003846) coreutils : - Fix df(1) to no longer interact with excluded file system types, so for example specifying -x nfs no longer hangs with problematic nfs mounts. (bsc#1026567) - Ensure df -l no longer interacts with dummy file system types, so for example no longer hangs with problematic NFS mounted via system.automount(5). (bsc#1043059) - Significantly speed up df(1) for huge mount lists. (bsc#965780) file : - update to version 5.22. - CVE-2014-9621: The ELF parser in file allowed remote attackers to cause a denial of service via a long string. (bsc#913650) - CVE-2014-9620: The ELF parser in file allowed remote attackers to cause a denial of service via a large number of notes. (bsc#913651) - CVE-2014-9653: readelf.c in file did not consider that pread calls sometimes read only a subset of the available data, which allows remote attackers to cause a denial of service (uninitialized memory access) or possibly have unspecified other impact via a crafted ELF file. (bsc#917152) - CVE-2014-8116: The ELF parser (readelf.c) in file allowed remote attackers to cause a denial of service (CPU consumption or crash) via a large number of (1) program or (2) section headers or (3) invalid capabilities. (bsc#910253) - CVE-2014-8117: softmagic.c in file did not properly limit recursion, which allowed remote attackers to cause a denial of service (CPU consumption or crash) via unspecified vectors. (bsc#910253) - Fixed a memory corruption during rpmbuild (bsc#1063269) - Backport of a fix for an increased printable string length as found in file 5.30 (bsc#996511) - file command throws
    last seen2020-06-01
    modified2020-06-02
    plugin id106092
    published2018-01-17
    reporterThis script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
    sourcehttps://www.tenable.com/plugins/nessus/106092
    titleSUSE SLES12 Security Update : CaaS Platform 2.0 images (SUSE-SU-2018:0053-1)
    code
    #
    # (C) Tenable Network Security, Inc.
    #
    # The descriptive text and package checks in this plugin were
    # extracted from SUSE update advisory SUSE-SU-2018:0053-1.
    # The text itself is copyright (C) SUSE.
    #
    
    include("compat.inc");
    
    if (description)
    {
      script_id(106092);
      script_version("3.8");
      script_cvs_date("Date: 2019/09/10 13:51:46");
    
      script_cve_id("CVE-2014-3710", "CVE-2014-8116", "CVE-2014-8117", "CVE-2014-9620", "CVE-2014-9621", "CVE-2014-9653", "CVE-2014-9939", "CVE-2017-12448", "CVE-2017-12450", "CVE-2017-12452", "CVE-2017-12453", "CVE-2017-12454", "CVE-2017-12456", "CVE-2017-12799", "CVE-2017-12837", "CVE-2017-12883", "CVE-2017-13757", "CVE-2017-14128", "CVE-2017-14129", "CVE-2017-14130", "CVE-2017-14333", "CVE-2017-14529", "CVE-2017-14729", "CVE-2017-14745", "CVE-2017-14974", "CVE-2017-3735", "CVE-2017-3736", "CVE-2017-3737", "CVE-2017-3738", "CVE-2017-6512", "CVE-2017-6965", "CVE-2017-6966", "CVE-2017-6969", "CVE-2017-7209", "CVE-2017-7210", "CVE-2017-7223", "CVE-2017-7224", "CVE-2017-7225", "CVE-2017-7226", "CVE-2017-7299", "CVE-2017-7300", "CVE-2017-7301", "CVE-2017-7302", "CVE-2017-7303", "CVE-2017-7304", "CVE-2017-8392", "CVE-2017-8393", "CVE-2017-8394", "CVE-2017-8396", "CVE-2017-8421", "CVE-2017-9746", "CVE-2017-9747", "CVE-2017-9748", "CVE-2017-9750", "CVE-2017-9755", "CVE-2017-9756");
      script_bugtraq_id(70807, 71692, 71700, 71714, 71715, 72516);
    
      script_name(english:"SUSE SLES12 Security Update : CaaS Platform 2.0 images (SUSE-SU-2018:0053-1)");
      script_summary(english:"Checks rpm output for the updated packages.");
    
      script_set_attribute(
        attribute:"synopsis", 
        value:"The remote SUSE host is missing one or more security updates."
      );
      script_set_attribute(
        attribute:"description", 
        value:
    "The Docker images provided with SUSE CaaS Platform 2.0 have been
    updated to include the following updates: binutils :
    
      - Update to version 2.29
    
      - 18750 bsc#1030296 CVE-2014-9939
    
      - 20891 bsc#1030585 CVE-2017-7225
    
      - 20892 bsc#1030588 CVE-2017-7224
    
      - 20898 bsc#1030589 CVE-2017-7223
    
      - 20905 bsc#1030584 CVE-2017-7226
    
      - 20908 bsc#1031644 CVE-2017-7299
    
      - 20909 bsc#1031656 CVE-2017-7300
    
      - 20921 bsc#1031595 CVE-2017-7302
    
      - 20922 bsc#1031593 CVE-2017-7303
    
      - 20924 bsc#1031638 CVE-2017-7301
    
      - 20931 bsc#1031590 CVE-2017-7304
    
      - 21135 bsc#1030298 CVE-2017-7209
    
      - 21137 bsc#1029909 CVE-2017-6965
    
      - 21139 bsc#1029908 CVE-2017-6966
    
      - 21156 bsc#1029907 CVE-2017-6969
    
      - 21157 bsc#1030297 CVE-2017-7210
    
      - 21409 bsc#1037052 CVE-2017-8392
    
      - 21412 bsc#1037057 CVE-2017-8393
    
      - 21414 bsc#1037061 CVE-2017-8394
    
      - 21432 bsc#1037066 CVE-2017-8396
    
      - 21440 bsc#1037273 CVE-2017-8421
    
      - 21580 bsc#1044891 CVE-2017-9746
    
      - 21581 bsc#1044897 CVE-2017-9747
    
      - 21582 bsc#1044901 CVE-2017-9748
    
      - 21587 bsc#1044909 CVE-2017-9750
    
      - 21594 bsc#1044925 CVE-2017-9755
    
      - 21595 bsc#1044927 CVE-2017-9756
    
      - 21787 bsc#1052518 CVE-2017-12448
    
      - 21813 bsc#1052503, CVE-2017-12456, bsc#1052507,
        CVE-2017-12454, bsc#1052509, CVE-2017-12453,
        bsc#1052511, CVE-2017-12452, bsc#1052514,
        CVE-2017-12450, bsc#1052503, CVE-2017-12456,
        bsc#1052507, CVE-2017-12454, bsc#1052509,
        CVE-2017-12453, bsc#1052511, CVE-2017-12452,
        bsc#1052514, CVE-2017-12450
    
      - 21933 bsc#1053347 CVE-2017-12799
    
      - 21990 bsc#1058480 CVE-2017-14333
    
      - 22018 bsc#1056312 CVE-2017-13757
    
      - 22047 bsc#1057144 CVE-2017-14129
    
      - 22058 bsc#1057149 CVE-2017-14130
    
      - 22059 bsc#1057139 CVE-2017-14128
    
      - 22113 bsc#1059050 CVE-2017-14529
    
      - 22148 bsc#1060599 CVE-2017-14745
    
      - 22163 bsc#1061241 CVE-2017-14974
    
      - 22170 bsc#1060621 CVE-2017-14729
    
      - Make compressed debug section handling explicit, disable
        for old products and enable for gas on all architectures
        otherwise. [bsc#1029995]
    
      - Remove empty rpath component removal optimization from
        to workaround CMake rpath handling. [bsc#1025282]
    
      - Fix alignment frags for aarch64 (bsc#1003846) 
    coreutils :
    
      - Fix df(1) to no longer interact with excluded file
        system types, so for example specifying -x nfs no longer
        hangs with problematic nfs mounts. (bsc#1026567)
    
      - Ensure df -l no longer interacts with dummy file system
        types, so for example no longer hangs with problematic
        NFS mounted via system.automount(5). (bsc#1043059)
    
      - Significantly speed up df(1) for huge mount lists.
        (bsc#965780) file :
    
      - update to version 5.22.
    
      - CVE-2014-9621: The ELF parser in file allowed remote
        attackers to cause a denial of service via a long
        string. (bsc#913650)
    
      - CVE-2014-9620: The ELF parser in file allowed remote
        attackers to cause a denial of service via a large
        number of notes. (bsc#913651)
    
      - CVE-2014-9653: readelf.c in file did not consider that
        pread calls sometimes read only a subset of the
        available data, which allows remote attackers to cause a
        denial of service (uninitialized memory access) or
        possibly have unspecified other impact via a crafted ELF
        file. (bsc#917152)
    
      - CVE-2014-8116: The ELF parser (readelf.c) in file
        allowed remote attackers to cause a denial of service
        (CPU consumption or crash) via a large number of (1)
        program or (2) section headers or (3) invalid
        capabilities. (bsc#910253)
    
      - CVE-2014-8117: softmagic.c in file did not properly
        limit recursion, which allowed remote attackers to cause
        a denial of service (CPU consumption or crash) via
        unspecified vectors. (bsc#910253)
    
      - Fixed a memory corruption during rpmbuild (bsc#1063269)
    
      - Backport of a fix for an increased printable string
        length as found in file 5.30 (bsc#996511)
    
      - file command throws 'Composite Document File V2
        Document, corrupt: Can't read SSAT' error against excel
        97/2003 file format. (bsc#1009966) gcc7 :
    
      - Support for specific IBM Power9 processor instructions.
    
      - Support for specific IBM zSeries z14 processor
        instructions.
    
      - New packages cross-npvtx-gcc7 and nvptx-tools added to
        the Toolchain Module for specific NVIDIA Card offload
        support. gzip :
    
      - fix mishandling of leading zeros in the end-of-block
        code (bsc#1067891) libsolv :
    
      - Many fixes and improvements for cleandeps.
    
      - Always create dup rules for 'distupgrade' jobs.
    
      - Use recommends also for ordering packages.
    
      - Fix splitprovides handling with addalreadyrecommended
        turned off. (bsc#1059065)
    
      - Expose solver_get_recommendations() in bindings.
    
      - Fix bug in solver_prune_to_highest_prio_per_name
        resulting in bad output from
        solver_get_recommendations().
    
      - Support 'without' and 'unless' dependencies.
    
      - Use same heuristic as upstream to determine source RPMs.
    
      - Fix memory leak in bindings.
    
      - Add pool_best_solvables() function.
    
      - Fix 64bit integer parsing from RPM headers.
    
      - Enable bzip2 and xz/lzma compression support.
    
      - Enable complex/rich dependencies on distributions with
        RPM 4.13+. libtool :
    
      - Add missing dependencies and provides to baselibs.conf
        to make sure libltdl libraries are properly installed.
        (bsc#1056381) libzypp :
    
      - Fix media handling in presence of a repo path prefix.
        (bsc#1062561)
    
      - Fix RepoProvideFile ignoring a repo path prefix.
        (bsc#1062561)
    
      - Remove unused legacy notify-message script.
        (bsc#1058783)
    
      - Support multiple product licenses in repomd.
        (fate#322276)
    
      - Propagate 'rpm --import' errors. (bsc#1057188)
    
      - Fix typos in zypp.conf. openssl :
    
      - CVE-2017-3735: openssl1,openssl: Malformed X.509
        IPAdressFamily could cause OOB read (bsc#1056058)
    
      - CVE-2017-3736: openssl: bn_sqrx8x_internal carry bug on
        x86_64 (bsc#1066242)
    
      - Out of bounds read+crash in DES_fcrypt (bsc#1065363)
    
      - openssl DEFAULT_SUSE cipher list is missing ECDHE-ECDSA
        ciphers (bsc#1055825) perl: Security issues for perl :
    
      - CVE-2017-12837: Heap-based buffer overflow in the
        S_regatom function in regcomp.c in Perl 5 before
        5.24.3-RC1 and 5.26.x before 5.26.1-RC1 allows remote
        attackers to cause a denial of service (out-of-bounds
        write) via a regular expression with a escape and the
        case-insensitive modifier. (bnc#1057724)
    
      - CVE-2017-12883: Buffer overflow in the S_grok_bslash_N
        function in regcomp.c in Perl 5 before 5.24.3-RC1 and
        5.26.x before 5.26.1-RC1 allows remote attackers to
        disclose sensitive information or cause a denial of
        service (application crash) via a crafted regular
        expression with an invalid escape. (bnc#1057721)
    
      - CVE-2017-6512: Race condition in the rmtree and
        remove_tree functions in the File-Path module before
        2.13 for Perl allows attackers to set the mode on
        arbitrary files via vectors involving
        directory-permission loosening logic. (bnc#1047178) Bug
        fixes for perl :
    
      - backport set_capture_string changes from upstream
        (bsc#999735)
    
      - reformat baselibs.conf as source validator workaround
        systemd :
    
      - unit: When JobTimeoutSec= is turned off, implicitly turn
        off JobRunningTimeoutSec= too. (bsc#1048605,
        bsc#1004995)
    
      - compat-rules: Generate compat by-id symlinks with 'nvme'
        prefix missing and warn users that have broken symlinks.
        (bsc#1063249)
    
      - compat-rules: Allow to specify the generation number
        through the kernel command line.
    
      - scsi_id: Fixup prefix for pre-SPC inquiry reply.
        (bsc#1039099)
    
      - tmpfiles: Remove old ICE and X11 sockets at boot.
    
      - tmpfiles: Silently ignore any path that passes through
        autofs. (bsc#1045472)
    
      - pam_logind: Skip leading /dev/ from PAM_TTY field before
        passing it on.
    
      - shared/machine-pool: Fix another mkfs.btrfs checking.
        (bsc#1053595)
    
      - shutdown: Fix incorrect fscanf() result check.
    
      - shutdown: Don't remount,ro network filesystems.
        (bsc#1035386)
    
      - shutdown: Don't be fooled when detaching DM devices with
        BTRFS. (bsc#1055641)
    
      - bash-completion: Add support for --now. (bsc#1053137)
    
      - Add convert-lib-udev-path.sh script to convert /lib/udev
        directory into a symlink pointing to /usr/lib/udev when
        upgrading from SLE11. (bsc#1050152)
    
      - Add a rule to teach hotplug to offline containers
        transparently. (bsc#1040800) timezone :
    
      - Northern Cyprus switches from +03 to +02/+03 on
        2017-10-29
    
      - Fiji ends DST 2018-01-14, not 2018-01-21
    
      - Namibia switches from +01/+02 to +02 on 2018-04-01
    
      - Sudan switches from +03 to +02 on 2017-11-01
    
      - Tonga likely switches from +13/+14 to +13 on 2017-11-05
    
      - Turks and Caicos switches from -04 to -05/-04 on
        2018-11-04
    
      - Corrections to past DST transitions
    
      - Move oversized Canada/East-Saskatchewan to 'backward'
        file
    
      - zic(8) and the reference runtime now reject multiple
        leap seconds within 28 days of each other, or leap
        seconds before the Epoch. util-linux :
    
      - Allow unmounting of filesystems without calling stat()
        on the mount point, when '-c' is used. (bsc#1040968)
    
      - Fix an infinite loop, a crash and report the correct
        minimum and maximum frequencies in lscpu for some
        processors. (bsc#1055446)
    
      - Fix a lscpu failure on Sydney Amazon EC2 region.
        (bsc#1066500)
    
      - If multiple subvolumes are mounted, report the default
        subvolume. (bsc#1039276) velum :
    
      - Fix logout issue on DEX download page * page doesn't
        exist (bsc#1066611)
    
      - Handle invalid sessions more user friendly
    
      - Fix undesired minimum nodes alert blink (bsc#1066371)
        wicked :
    
      - A regression in wicked was causing the hostname not to
        be set correctly via DHCP in some cases
        (bsc#1057007,bsc#1050258)
    
      - Configure the interface MTU correctly even in cases
        where the interface was up already (bsc#1059292)
    
      - Don't abort the process that adds configures routes if
        one route fails (bsc#1036619)
    
      - Handle DHCP4 user-class ids properly (bsc#1045522)
    
      - ethtool: handle channels parameters (bsc#1043883) 
    zypper :
    
      - Locale: Fix possible segmentation fault. (bsc#1064999)
    
      - Add summary hint if product is better updated by a
        different command. This is mainly used by rolling
        distributions like openSUSE Tumbleweed to remind their
        users to use 'zypper dup' to update (not zypper up or
        patch). (bsc#1061384)
    
      - Unify '(add|modify)(repo|service)' property related
        arguments.
    
      - Fixed 'add' commands supporting to set only a subset of
        properties.
    
      - Introduced '-f/-F' as preferred short option for
        --[no-]refresh in all four commands. (bsc#661410,
        bsc#1053671)
    
      - Fix missing package names in installation report.
        (bsc#1058695)
    
      - Differ between unsupported and packages with unknown
        support status. (bsc#1057634)
    
      - Return error code '107' if an RPM's %post configuration
        script fails, but only if ZYPPER_ON_CODE12_RETURN_107=1
        is set in the environment. (bsc#1047233)
    
    Note that Tenable Network Security has extracted the preceding
    description block directly from the SUSE security advisory. Tenable
    has attempted to automatically clean and format it as much as possible
    without introducing additional issues."
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1003846"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1004995"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1009966"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1022404"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1025282"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1025891"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1026567"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029907"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029908"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029909"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1029995"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1030623"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1035386"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1036619"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1039099"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1039276"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1039513"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1040800"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1040968"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1041090"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1043059"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1043590"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1043883"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1043966"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1044016"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1045472"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1045522"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1045732"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1047178"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1047233"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1048605"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1048861"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1050152"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1050258"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1050487"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052503"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052507"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052509"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052511"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052514"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1052518"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1053137"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1053347"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1053595"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1053671"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1055446"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1055641"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1055825"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1056058"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1056312"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1056381"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057007"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057139"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057144"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057149"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057188"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057634"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057721"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1057724"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1058480"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1058695"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1058783"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1059050"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1059065"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1059075"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1059292"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1059723"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1060599"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1060621"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1061241"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1061384"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1062561"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1063249"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1063269"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1064571"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1064999"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1065363"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1066242"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1066371"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1066500"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1066611"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1067891"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1070878"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1070958"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1071905"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://bugzilla.suse.com/show_bug.cgi?id=1071906"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-3710/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-8116/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-8117/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-9620/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-9621/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2014-9653/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12448/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12450/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12452/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12453/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12454/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12456/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12799/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12837/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-12883/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-13757/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14128/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14129/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14130/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14333/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14529/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14729/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14745/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-14974/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-3735/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-3736/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-3737/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-3738/"
      );
      script_set_attribute(
        attribute:"see_also",
        value:"https://www.suse.com/security/cve/CVE-2017-6512/"
      );
      # https://www.suse.com/support/update/announcement/2018/suse-su-20180053-1/
      script_set_attribute(
        attribute:"see_also",
        value:"http://www.nessus.org/u?b2e30c71"
      );
      script_set_attribute(
        attribute:"solution", 
        value:
    "To install this SUSE Security Update use YaST online_update.
    Alternatively you can run the command listed for your product :
    
    SUSE CaaS Platform ALL:zypper in -t patch SUSE-CAASP-ALL-2018-40=1
    
    To bring your system up-to-date, use 'zypper patch'."
      );
      script_set_cvss_base_vector("CVSS2#AV:N/AC:L/Au:N/C:P/I:P/A:P");
      script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
      script_set_cvss3_base_vector("CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H");
      script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
      script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
      script_set_attribute(attribute:"exploit_available", value:"true");
    
      script_set_attribute(attribute:"plugin_type", value:"local");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-caasp-dex-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-dnsmasq-nanny-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-haproxy-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-kubedns-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-mariadb-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-openldap-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-pause-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-pv-recycler-node-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-salt-api-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-salt-master-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-salt-minion-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-sidecar-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-tiller-image");
      script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:sles12-velum-image");
      script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:12");
    
      script_set_attribute(attribute:"vuln_publication_date", value:"2014/11/05");
      script_set_attribute(attribute:"patch_publication_date", value:"2018/01/09");
      script_set_attribute(attribute:"plugin_publication_date", value:"2018/01/17");
      script_set_attribute(attribute:"generated_plugin", value:"current");
      script_end_attributes();
    
      script_category(ACT_GATHER_INFO);
      script_copyright(english:"This script is Copyright (C) 2018-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");
      script_family(english:"SuSE Local Security Checks");
    
      script_dependencies("ssh_get_info.nasl");
      script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
    
      exit(0);
    }
    
    
    include("audit.inc");
    include("global_settings.inc");
    include("rpm.inc");
    
    
    if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
    release = get_kb_item("Host/SuSE/release");
    if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
    os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
    if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
    os_ver = os_ver[1];
    if (! preg(pattern:"^(SLES12)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES12", "SUSE " + os_ver);
    
    if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
    
    cpu = get_kb_item("Host/cpu");
    if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
    if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
    if (cpu >!< "x86_64") audit(AUDIT_ARCH_NOT, "x86_64", cpu);
    
    
    
    flag = 0;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-caasp-dex-image-2.0.0-3.3.11")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-dnsmasq-nanny-image-2.0.1-2.3.15")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-haproxy-image-2.0.1-2.3.16")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-kubedns-image-2.0.1-2.3.11")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-mariadb-image-2.0.1-2.3.15")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-openldap-image-2.0.0-2.3.11")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-pause-image-2.0.1-2.3.9")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-pv-recycler-node-image-2.0.1-2.3.10")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-salt-api-image-2.0.1-2.3.10")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-salt-master-image-2.0.1-2.3.10")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-salt-minion-image-2.0.1-2.3.14")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-sidecar-image-2.0.1-2.3.11")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-tiller-image-2.0.0-2.3.11")) flag++;
    if (rpm_check(release:"SLES12", cpu:"x86_64", reference:"sles12-velum-image-2.0.1-2.3.13")) flag++;
    
    
    if (flag)
    {
      if (report_verbosity > 0) security_hole(port:0, extra:rpm_report_get());
      else security_hole(0);
      exit(0);
    }
    else
    {
      tested = pkg_tests_get();
      if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
      else audit(AUDIT_PACKAGE_NOT_INSTALLED, "CaaS Platform 2.0 images");
    }