Vulnerabilities > CVE-2013-2364 - Cross-Site Scripting vulnerability in HP System Management Homepage

CVSS 3.5 - LOW
Attack vector
Attack complexity
Privileges required
Confidentiality impact
Integrity impact
Availability impact


Cross-site scripting (XSS) vulnerability in HP System Management Homepage (SMH) before 7.2.1 allows remote authenticated users to inject arbitrary web script or HTML via unspecified vectors.

Vulnerable Configurations

Part Description Count

Common Attack Pattern Enumeration and Classification (CAPEC)

  • Cross Site Scripting through Log Files
    An attacker may leverage a system weakness where logs are susceptible to log injection to insert scripts into the system's logs. If these logs are later viewed by an administrator through a thin administrative interface and the log data is not properly HTML encoded before being written to the page, the attackers' scripts stored in the log will be executed in the administrative interface with potentially serious consequences. This attack pattern is really a combination of two other attack patterns: log injection and stored cross site scripting.
  • Embedding Scripts in Non-Script Elements
    This attack is a form of Cross-Site Scripting (XSS) where malicious scripts are embedded in elements that are not expected to host scripts such as image tags (<img>), comments in XML documents (< !-CDATA->), etc. These tags may not be subject to the same input validation, output validation, and other content filtering and checking routines, so this can create an opportunity for an attacker to tunnel through the application's elements and launch a XSS attack through other elements. As with all remote attacks, it is important to differentiate the ability to launch an attack (such as probing an internal network for unpatched servers) and the ability of the remote attacker to collect and interpret the output of said attack.
  • Embedding Scripts within Scripts
    An attack of this type exploits a programs' vulnerabilities that are brought on by allowing remote hosts to execute scripts. The attacker leverages this capability to execute scripts to execute his/her own script by embedding it within other scripts that the target software is likely to execute. The attacker must have the ability to inject script into script that is likely to be executed. If this is done, then the attacker can potentially launch a variety of probes and attacks against the web server's local environment, in many cases the so-called DMZ, back end resources the web server can communicate with, and other hosts. With the proliferation of intermediaries, such as Web App Firewalls, network devices, and even printers having JVMs and Web servers, there are many locales where an attacker can inject malicious scripts. Since this attack pattern defines scripts within scripts, there are likely privileges to execute said attack on the host. Of course, these attacks are not solely limited to the server side, client side scripts like Ajax and client side JavaScript can contain malicious scripts as well. In general all that is required is for there to be sufficient privileges to execute a script, but not protected against writing.
  • Cross-Site Scripting in Error Pages
    An attacker distributes a link (or possibly some other query structure) with a request to a third party web server that is malformed and also contains a block of exploit code in order to have the exploit become live code in the resulting error page. When the third party web server receives the crafted request and notes the error it then creates an error message that echoes the malformed message, including the exploit. Doing this converts the exploit portion of the message into to valid language elements that are executed by the viewing browser. When a victim executes the query provided by the attacker the infected error message error message is returned including the exploit code which then runs in the victim's browser. XSS can result in execution of code as well as data leakage (e.g. session cookies can be sent to the attacker). This type of attack is especially dangerous since the exploit appears to come from the third party web server, who the victim may trust and hence be more vulnerable to deception.
  • Cross-Site Scripting Using Alternate Syntax
    The attacker uses alternate forms of keywords or commands that result in the same action as the primary form but which may not be caught by filters. For example, many keywords are processed in a case insensitive manner. If the site's web filtering algorithm does not convert all tags into a consistent case before the comparison with forbidden keywords it is possible to bypass filters (e.g., incomplete black lists) by using an alternate case structure. For example, the "script" tag using the alternate forms of "Script" or "ScRiPt" may bypass filters where "script" is the only form tested. Other variants using different syntax representations are also possible as well as using pollution meta-characters or entities that are eventually ignored by the rendering engine. The attack can result in the execution of otherwise prohibited functionality.


NASL familyWeb Servers
descriptionAccording to the web server
last seen2020-06-01
plugin id69020
reporterThis script is Copyright (C) 2013-2019 and is owned by Tenable, Inc. or an Affiliate thereof.
titleHP System Management Homepage < Multiple Vulnerabilities (BEAST)
# (C) Tenable Network Security, Inc.


if (description)
  script_cvs_date("Date: 2019/11/27");

  script_xref(name:"CERT", value:"895524");
  script_xref(name:"HP", value:"HPSBMU02900");
  script_xref(name:"HP", value:"SSRT100740");
  script_xref(name:"HP", value:"SSRT101209");
  script_xref(name:"HP", value:"SSRT101210");
  script_xref(name:"HP", value:"SSRT100992");
  script_xref(name:"HP", value:"SSRT100992");
  script_xref(name:"HP", value:"SSRT100992");
  script_xref(name:"HP", value:"SSRT100992");
  script_xref(name:"HP", value:"SSRT101137");
  script_xref(name:"HP", value:"SSRT100696");
  script_xref(name:"HP", value:"SSRT100835");
  script_xref(name:"HP", value:"SSRT100907");
  script_xref(name:"HP", value:"SSRT100907");
  script_xref(name:"HP", value:"SSRT100907");
  script_xref(name:"HP", value:"SSRT100907");
  script_xref(name:"HP", value:"SSRT101007");
  script_xref(name:"HP", value:"SSRT101076");
  script_xref(name:"HP", value:"SSRT101150");
  script_xref(name:"HP", value:"SSRT101151");
  script_xref(name:"HP", value:"SSRT101254");
  script_xref(name:"HP", value:"emr_na-c03839862");

  script_name(english:"HP System Management Homepage < Multiple Vulnerabilities (BEAST)");
  script_summary(english:"Does a banner check");

  script_set_attribute(attribute:"synopsis", value:
"The remote web server is affected by multiple vulnerabilities.");
  script_set_attribute(attribute:"description", value:
"According to the web server's banner, the version of HP System
Management Homepage (SMH) hosted on the remote web server is a version
prior to It is, therefore, affected by the following
vulnerabilities :

  - An information disclosure vulnerability, known as BEAST,
    exists in the SSL 3.0 and TLS 1.0 protocols due to a
    flaw in the way the initialization vector (IV) is
    selected when operating in cipher-block chaining (CBC)
    modes. A man-in-the-middle attacker can exploit this
    to obtain plaintext HTTP header data, by using a
    blockwise chosen-boundary attack (BCBA) on an HTTPS
    session, in conjunction with JavaScript code that uses
    the HTML5 WebSocket API, the Java URLConnection API,
    or the Silverlight WebClient API. (CVE-2011-3389)

  - The utility 'apachectl' can receive a zero-length
    directory name in the LD_LIBRARY_PATH via the 'envvars'
    file. A local attacker with access to that utility
    could exploit this to load a malicious Dynamic Shared
    Object (DSO), leading to arbitrary code execution.

  - Numerous, unspecified errors could allow remote denial
    of service attacks. (CVE-2012-2110, CVE-2012-2329,
    CVE-2012-2336, CVE-2013-2357, CVE-2013-2358,
    CVE-2013-2359, CVE-2013-2360)

  - The fix for CVE-2012-1823 does not completely correct
    the CGI query parameter vulnerability. Disclosure of
    PHP source code and code execution are still possible.
    Note that this vulnerability is exploitable only when
    PHP is used in CGI-based configurations.  Apache with
    'mod_php' is not an exploitable configuration.
    (CVE-2012-2311, CVE-2012-2335)

  - Unspecified errors exist that could allow unauthorized
    access. (CVE-2012-5217, CVE-2013-2355)

  - Unspecified errors exist that could allow disclosure of
    sensitive information. (CVE-2013-2356, CVE-2013-2363)

  - An unspecified error exists that could allow cross-site
    scripting attacks. (CVE-2013-2361)

  - Unspecified errors exist that could allow a local
    attacker to cause denial of service conditions.
    (CVE-2013-2362, CVE-2013-2364)

  - An as-yet unspecified vulnerability exists that could 
    cause a denial of service condition. (CVE-2013-4821)");
  script_set_attribute(attribute:"see_also", value:"");
  script_set_attribute(attribute:"see_also", value:"");
  script_set_attribute(attribute:"see_also", value:"");
  script_set_attribute(attribute:"see_also", value:"");
  script_set_attribute(attribute:"see_also", value:"");
  script_set_attribute(attribute:"solution", value:
"Upgrade to HP System Management Homepage or later.");
  script_set_attribute(attribute:"cvss_score_source", value:"CVE-2012-2335");

  script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
  script_set_attribute(attribute:"exploit_available", value:"true");
  script_set_attribute(attribute:"exploit_framework_core", value:"true");
  script_set_attribute(attribute:"metasploit_name", value:'PHP apache_request_headers Function Buffer Overflow');
  script_set_attribute(attribute:"exploit_framework_metasploit", value:"true");
  script_set_attribute(attribute:"in_the_news", value:"true");
  script_cwe_id(20, 74, 79, 442, 629, 711, 712, 722, 725, 750, 751, 800, 801, 809, 811, 864, 900, 928, 931, 990);

  script_set_attribute(attribute:"vuln_publication_date", value:"2011/08/31");
  script_set_attribute(attribute:"patch_publication_date", value:"2013/05/21");
  script_set_attribute(attribute:"plugin_publication_date", value:"2013/07/23");

  script_set_attribute(attribute:"plugin_type", value:"remote");
  script_set_attribute(attribute:"cpe", value:"cpe:/a:hp:system_management_homepage");

  script_family(english:"Web Servers");

  script_copyright(english:"This script is Copyright (C) 2013-2019 and is owned by Tenable, Inc. or an Affiliate thereof.");

  script_require_ports("Services/www", 2301, 2381);



port    = get_http_port(default:2381, embedded:TRUE);

install = get_install_from_kb(appname:'hp_smh', port:port, exit_on_fail:TRUE);
dir     = install['dir'];
version = install['ver'];
prod    = get_kb_item_or_exit("www/"+port+"/hp_smh/variant");

if (version == UNKNOWN_VER)
  exit(1, 'The version of '+prod+' installed at '+build_url(port:port, qs:dir+"/")+' is unknown.');

# nb: 'version' can have non-numeric characters in it so we'll create
#     an alternate form and make sure that's safe for use in 'ver_compare()'.
version_alt = ereg_replace(pattern:"[_-]", replace:".", string:version);
if (!ereg(pattern:"^[0-9][0-9.]+$", string:version_alt))
  exit(1, 'The version of '+prod+' installed at '+build_url(port:port, qs:dir+"/")+' does not look valid ('+version+').');

fixed_version = '';
if (ver_compare(ver:version_alt, fix:fixed_version, strict:FALSE) == -1)
  set_kb_item(name: 'www/'+port+'/XSS', value: TRUE);
  if (report_verbosity > 0)
    source_line = get_kb_item("www/"+port+"/hp_smh/source");

    report = '\n  Product           : ' + prod;
    if (!isnull(source_line))
      report += '\n  Version source    : ' + source_line;
    report +=
      '\n  Installed version : ' + version +
      '\n  Fixed version     : ' + fixed_version + '\n';
    security_hole(port:port, extra:report);
  else security_hole(port);

else audit(AUDIT_LISTEN_NOT_VULN, prod, port, version);